If you see in our product reviews the line that says, "Review from a Similar..." that means that the review is for a very similar product that will basically function the exact same as what you are looking at but in a different application. The brand and product line would be the exact same.
I really like the WeatherTech floor mats as they seem to fit great, are very durable, and are easy to clean.
If you have a gray interior I would go with gray mats too. For the front you would want... view full answer...
Actually, the Kuat Beta 2 Bike rack you mentioned, part # B202-2 would be an excellent choice for you. The rack is very reasonably priced, and is made of strong but lightweight aluminum which makes it easy for just about anybody to handle. The rack is very highly rated by our customers, and features padded anti sway cradles and sturdy rubber straps to keep your bikes secure. Most importantly for you, the rack provides a very effective anti-rattle feature that will lock the rack tightly... view full answer...
To convert the 4-way wiring connector on your 2007 Lexus RX350 to a 7-way, you will need to install the Universal Installation Kit for Trailer Brake Controller, # ETBC7. This will give you the additional wiring needed to be able to operate a brake controller when towing a trailer with brakes.
When it comes to whether wiring a brake controller into the interior of your Lexus or going with the wireless is easier, my opinion is that long term a wired brake controller like the Tekonsha Prodigy... view full answer...
Yes, for your 2015 Lexus RX 350 F-Sport without the factory tow package the correct trailer wiring harness you'll need is the Tekonsha kit part # 118255 which will give you a 4-way. This will work great with the Curt hitch part # C13143 you plan to install as well.
If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes... view full answer...
The hitch you bought is the right one and will work for you. The Curt Hitch part # C13143 that you bought is confirmed to fit your 2015 Lexus RX 350 F Sport so it would work. The part # 87569 would not work for you.
I attached an install video for you to check out as well.
For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag. view full answer...
For your 2013 Lexus RX350 with rear spoiler, I recommend the Hollywood Racks Over-The-Top Rack, # HRF2. This rack has an upper arm piece that moves the straps up and over the spoiler so they do not make contact with the spoiler. This means that the spoiler will not have to carry any weight. For 3 bikes use # HRF2-3. I have included a link to a video review of this rack for you. view full answer...
I may have a solution for you, however we do not currently offer a trunk-mount bike rack that is confirmed to fit your 2017 Lexus NX200.
The only current options for transporting your bikes with your Lexus is going to be either a hitch-mounted bike rack or a roof-mounted rack.
I recommend going with a trailer hitch and hitch-mounted rack, because as you referenced, loading bikes onto a rooftop carrier can be cumbersome. For a trailer hitch that is custom-fit for your Lexus NX200t, I... view full answer...
For front mats for your 2007 Lexus RX 350 the Weathertech mats part # WT460141 are a confirmed fit that would work well. Then for the second row we have the # WT440142 which is a matching custom set confirmed to fit. view full answer...
For your 2017 Lexus RX 350 the Curt hitch part # C13272 that you referenced is a confirmed fit and would work well. No fascia trimming is needed.
The Curt wiring harness part # 56083 will plug into the port. But what you need to do is test the pins of the connector you found with a circuit tester like part # PTW2993 to make sure voltage is present there. Most likely it is but you would want to verify first. Let us know too! view full answer...
The overall towing capacity of a vehicle is only as high as the lowest rated component as it's the weak point that would fail first. So while we have hitches for your 2012 Lexus RX 350 like the Curt # C13143 which have higher towing capacities you'd still be limited to the 2,000 lb figure you mentioned.
If you need trailer wiring the # 118255 would be a great option as well that installs easily and is reliable. view full answer...
Kuat recommends the part # H101 for the Kuat Beta for 2 inch hitches part # B202-2 that you referenced.
The usable span of the hitch lock is 3-1/2 inches which would be more than enough.
Usually 2 inch hitch accessories use 5/8 inch hitch pins, but Kuat designed this rack for a 1/2 inch hitch pin like the # HL2. view full answer...
The base model 2016 Lexus RX 350 is not likely going to have the factory tow package. But to be sure you could have a Lexus dealer run the VIN to tell you how the vehicle is equipped.
Without the factory tow package I recommend trailer wiring harness # 119250KIT. This harness does not require any splicing into the vehicle wiring. Its connectors clamp around the vehicle wires to detect the current passing through them. view full answer...
I recommend using the Mounting Bracket, # 18144, with No-Drill Bracket, # 18140. This will provide a more professional appearance than zip tying the harness to the trailer hitch on your 2011 Lexus RX350. view full answer...
The Curt Short-Arm Weight Distribution System with Shank - Trunnion Bar - 6,000 lbs GTW, 600 lbs TW # C17330 only requires a hitch ball. For a 2-5/16 inch ball, I recommend # 19286. For a 2 inch ball, I recommend # A-90.
I recommend adding the Curt Friction Sway Control for Weight Distribution Systems # 17200 for sway control assistance. This will bolt right on and give you assistance on trailers up to 26 feet long. I've attached an article to assist. view full answer...
We have everything you need to tow a trailer with your 2013 Lexus RX 350.
Starting with the trailer hitch, I recommend the Curt Class III Receiver Hitch # C13143. This is an excellent Class III hitch that will provide a 2 inch receiver opening and has a towing weight capacity of 4,000 pounds. You will also want to check the towing capacity of your vehicle, as this will likely be your limiting factor. This information should be listed in your copy of the owner's manual. This hitch is confirmed... view full answer...
The Curt Trailer Hitch # C13143 is confirmed as a fit for your 2015 RX 350. This hitch has a 2-inch receiver opening.
The # 118252 wiring harness will work well for you if your Lexus has a factory tow package. If you do not have the factory tow package you will need part # 118255.
There are a couple ways you can attach the 4-way trailer connector. You can use a bracket like part # 18144 which screws and nuts needed for installation.
You can go the no-drill route by using either part... view full answer...
Your RadRover 5 weighs 69 lbs and your Eunorau 48V250W+350W FAT-AWD All Wheel Drive bike weighs 77 lbs. Both of these bikes exceed the weight limit of the Thule EasyFold XT. In fact, even if you remove the battery of the Eunorau, it will still exceed the weight limit of the EasyFold XT. So it is important that your hitch receiver has a large maximum tongue weight to support the bikes.
Now I do have a hitch receiver recommendation for your 2015 Lexus RX 350. The Curt Trailer Hitch Receiver... view full answer...
The Curt Hitch part # C13143 that you referenced has been confirmed to fit your 2015 Lexus RX 350 so I would recommend it for you. Right now the only trailer wiring option you would have would be to go to a Lexus dealer to see what they have to offer.
If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch... view full answer...
At this time we do not carry a sewer hose carrier for the back of an RV but I have a solution for you. You will need to make a run to your local home improvement store to assemble all the necessary parts.
You can build one of these tubes fairly easily by using 4 inch diameter PVC tubing (go 5 inch or even 6 inch if you want to keep your hose ends on) and two residential sewer clean-out screw caps, found at any home improvement center. Cut to your desired length and mount using plastic... view full answer...
Go To Results