We have exactly what you are looking for, which are Firestone air bags that fit your 2021 Ford F-350 Tremor 4WD with a single rear wheel. I verified the fit directly with Firestone for you, and the air bags, along with the wireless compressor that will fit your F-350 are the following:
- Firestone Ride-Rite Air Helper Springs # F35FV
- Air Command Compressor System - Wireless # F2610
You made a really smart choice going with Firestone for your F-350 because they are the most well-constructed... view full answer...
The screen on the MaxxAir MaxxFan Mini Roof Vent w/ 12V Fan # MA00-04401M is somewhat pliable and you'll be able to use your fingers and a little bit of pressure to bend the screen down to clear the fan blades and stop the rubbing. Be careful not to apply too much pressure and tear the screen. view full answer...
Out of the Curt # C11405 and Draw-Tite # 24928 trailer hitches I recommend going with the Curt. This USA made trailer hitch has about 1/2" more ground clearance and it doesn't have the welded tab inside the receiver which can be a pain when it comes to using a bike rack.
Please note that the Curt warranty does require the use of a support strap like part # 18050 for non-trailer loads like this bike rack. Also since this is a Class I trailer hitch you are limited to carrying only 2 bikes.
If... view full answer...
I have a solution for you but our highest capacity one bike bike rack is the Kuat Transfer V2 Bike Rack item # KU64FR and it tops out at 60 lbs. It is recommended to remove your battery, but I don't see it dropping 20 lbs off of your Aventon E-Bike. This bike rack fits both a class III 2" hitch and both class I and II 1-1/4" hitches.
If you can get your bike down to 66 lbs you will be able to use the Yakima OnRamp Bike Rack for 2 Electric Bikes item # Y36FR for a 2" hitch or item # Y96FR... view full answer...
Yes, you can use the Thule TracRac SR # TH43002XT-501 or # TH43002XT-501EX (with the extension) along with the BAK Revolver X4s # BAK27ZR on your 2018 Ford F-150.
This is actually my favorite combination for a ladder rack and tonneau cover because the ladder rack not only has a great amount of adjustability but it can also support up to 1,250 lbs while the Revolver X4s combines the sleek look of a roll up cover with the strength and security of a hard cover. view full answer...
The Reese Goose Box 5th-Wheel-to-Gooseneck Air Ride Coupler Adapter # RP85FR is going to be your best option as the Gen-Y pin boxes you found are not yet certified by Lippert to not void their frame warranty. You will need the Safety Chain Kit # RP49151 since you are switching to a ball connection.
If you prefer to go with the Gen-Y and are not worried about the warranty then you will need to find the tongue weight of your trailer. The Gen-Y Hitch # GY58GR which is rated for a tongue... view full answer...
You will want to go with the MORryde Suspension Upgrade Kit # MR46ZR, which comes with the 2-1/2" long shackles. This kit has all wet bolts, bronze bushings and heavy-duty 1/2" thick shackles. Adding this along with the other parts we discussed is going to be a very nice upgrade, especially if the current suspension is stock. view full answer...
Towing a trailer can definitely have a negative effect on how your truck rides so adding air bag suspension enhancement to your 2024 Toyota Tundra is a very good idea. The correct fit for your truck is the following:
- Air Lift LoadLifter 5000 Air Helper Springs # AL84JQ
Also, I do highly recommend adding a compressor in order to make both monitoring and maintaining the air bags much easier. The best option to do so is a wireless compressor, the Air Lift WirelessAIR Compressor System... view full answer...
There is one set of air bags that fits your 2023 Ram 3500 cab and chassis, from Firestone. The correct fit for your truck is the following:
- Firestone Ride-Rite Air Helper Springs # F2478
Also, I do highly recommend adding a compressor in order to make both monitoring and maintaining the air bags much easier. The best option to do so is a wireless compressor, the Air Lift WirelessAIR Compressor System # AL58WQ.
Finally, to avoid any leaks when installing the air bags you'll want to... view full answer...
I strongly recommend the TremPro 644 Silicone Sealant # 0160297. I used this sealant on my trailer when I replaced a roof vent about 4 years ago and it is still going strong. This sealant does a great job at holding up to dramatic temperature changes without shrinking, drying up or cracking.
This sealant works great on all types of trailer materials including metal, wood, and plastic. view full answer...
To use the Thule Hullavator Pro Kayak Carrier # TH898 on your 2021 Toyota 4Runner I recommend the Feet for Thule Crossbars # TH710401 with either the Thule WingBar Evo Crossbars in Black # TH711420 or Silver # TH711400. These crossbars are 53" long allowing you to have the minimum 4" overhang needed for the Hullavator.
Since you need the 4" overhang for the crossbars you will not be able to use the Thule AeroBlade Edge Roof Rack.
The Thule One-Key System Lock Cylinders # TH450800 will... view full answer...
The correct Never Fail Tandem Axle Suspension Upgrade Hardware Kit for your 2018 Coleman Light 2515RL is part # LC281285. However, this kit is more for longevity and maintenance purposes than it is for improved ride quality or anything of that nature. If you are looking for something to help with this then you would want to use the Equa-Flex Cushioned Equalizers part # LC279687 or the Road Armor Shock Absorbing Equalizer Kit part # LC696740 which both contain rubber cores to minimize chucking... view full answer...
Yes, a Chevy Silverado bumper from 1999 will fit a 2005 model. For instance, the Westin Perfect Match Series Rear Step Bumper - Chrome Plated Steel # 31006 is a fit for both 1500 and 2500 LD trucks, but is not a fit for 2500 and 3500 HD trucks. You would need to do some custom brackets for the HD models for the 1999 bumper to fit your 2005 as we don't have a fit for a 1999 Heavy Duty truck.
If you have a the 2500 or 3500 model for 2005 you may consider the custom fit # 31013. view full answer...
It looks like you have the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 installed on your enclosed trailer's existing rain gutter rails. For a different trailer that does not have these mounting rails I recommend using a track type rack system such as the Yakima HardTop SL # Y01618 since we do not have adapters to allow installing the Rack'em to a flat roof surface.
This adjustable Yakima rack uses tracks that mount to the trailer roof (not to the side edge like the Rack'em) and... view full answer...
The SumoSprings Maxim Custom Helper Springs like part # SSR-336-47-1 do indeed offer a better ride quality when compared to the SumoSprings Solo Custom Helper Springs like part # SSR-338-47 which is what I assume you are referring to. However, the SumoSprings Maxim Custom Helper Springs will only work for you if you have the standard axle configuration and not the 2" spacer (see photo).
If you do have this spacer which most Sprinters do then you will want to consider the Roadmaster Rear... view full answer...
For a class 3 hitch for your 2023 KIA Sportage Plug-In Hybrid I recommend the Curt hitch # C94WR. According to Curt, this will fit all models of the 2023 KIA Sportage. I like this Curt hitch because it has a higher tongue weight rating (525 lbs) than the Draw-tite brand hitch. This would be beneficial if you intend to use a bike rack or cargo carrier as it will be more versatile and will allow you to carry more weight.
As far as the wiring it will be the same wiring for hybrid or plug... view full answer...
The etrailer Invisible Base Plate Kit # e86YR is compatible with compatible with all etrailer, Demco, and Blue Ox tow bars so you won't need an adapter to connect to your Aventa II tow bar. view full answer...
When installing the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR on your 2006 Toyota Tacoma there will be a little bit of wiring required. In order to plug this brake controller into your factory wiring harness you need the Tekonsha Custom Wiring Adapter # C51362 along with the # 331-TPH-019.
One end of this wiring harness will connect to the wires on your brake controller using the included butt connectors. Once this is connected to the wiring harness on the # RED44FR you... view full answer...
So long as you have flush side rails on your 2017 Lexus NX 200t then I do have options for you to carry both your three snowboards and a pair of skis.
For the roof rack, I recommend using the Yakima JetStream Crossbar System which is composed of part # Y00426, part # Y64AR, and part # Y59AR. The JetStream system has aero crossbars for reduced wind noise and integrated channels for use with channel mounted accessories.
For a roof rack mounted ski carrier, I recommend the Yakima FatCat... view full answer...
We do not have a light assembly similar to the Peterson # 425000 that features a single wire design. It sounds like your existing light uses its mounting hardware for ground. The only difference with this particular assembly is that it will use a separate wire (white) for this purpose, that you would just need to attach to a clean bare metal surface on the trailer.
I have attached a short video review on this light that you can also check out. view full answer...
Go To Results