The Hitch Pin Clip part # 37201011 which is for 5/8" hitch pins has a 3/16" diameter. The Hitch Pin Clip part # 37201131 which is for 1/2" hitch pins has a 1/8" diameter. There are some hitch pins that will take both but this isn't a standard to the best of my knowledge so you'll need to measure. view full answer...
The Hitch Pin part # 37201021 is designed to be used with an 11/64" clip. We do offer this pin and clip together, the Hitch Pin with Clip part # 37201074. view full answer...
Yes, for a replacement clip on the hitch pin that secures your Blue Ox shank you can absolutely use the option from Curt:
- Curt Hitch Clip for 1/2" or 5/8" Pin # C21600
These are standard hitch clips that will fit your Blue Ox hitch pin. view full answer...
For a traditional pin and clip, I would recommend Curt's hitch pin and clip # C21510. This hitch pin and clip is designed to work with Class III, Class IV, and Class V trailer hitches.
If you are looking for a locking hitch pin, I recommend this stainless steel lock # e98882. This locking hitch pin is designed to fit Class III and Class IV hitches. view full answer...
To replace the pins that hold your 5th wheel hitch to your trucks industry standard rails you will need the Replacement Rail Pins and Clips for Curt 5th Wheel Trailer Hitches item # C16902. These pins and clips are compatible with your Curt Q20 Hitch item # C16536. view full answer...
You will need the pin and clip, part # PC3, for your 2 inch hitch opening. The hitch pin diameter is 5/8 inch and is specifically made for the 2 inch hitch. view full answer...
The etrailer hitch pin and clip part # e65TR does fit the Curt hitch part # C13381 but it's not the type of hitch pin to use with the Thule Apex XT part # TH9024XT as it does not need a hitch pin. Essentially it uses a wedge on the shank to hold the bike in place to the hitch tube and has an arm that folds into the hitch pin hole. view full answer...
It is probably easier for a woman to insert or remove the hitch pin and clip once Curt trailer hitch # C11126 installed on a Mini. Without trying to sound sexist women tend to have smaller features and could reach in and place the pin in with more ease than a big, hairy man arm.
Pin # C21410 is cushioned which would lessen the stress on the hands. Otherwise you would be looking at a locking hitch pin which would probably be even more difficult.
Curt does state that when using this rack... view full answer...
Yes it does! The correct replacement pin and clip for your 10,000 lb Equal-i-zer weight distribution hitch # EQ37100ET is the Replacement Pin and Clip for Equal-i-zer Weight Distribution Spring Bars # EQ95-01-9400.
This is a fit each Equal-i-zer system so it'll be exactly what you need. view full answer...
The Swagman Replacement Threaded Hitch Pin and Clip # P5901 is designed to fit Swagman bikes racks with 2 inch shanks. This hitch pin has an outer diameter of 5/8 inch.
If your bike rack has a 1-1/4 inch shank then you will want to use # P5902. This hitch pin and clip also works on bikes rack that have a 1-1/4 inch shank with a 2 inch adapter installed. This hitch pin has an outer diameter of 1/2 inch. view full answer...
ATVs do not have a universal hitch pin size they will require, the size of the hitch pin is actually determined by the trailer hitch that fits.
If you are using something like the Curt ATV Ball Mount Adapter # C45006, for example, you would need the Pin and Clip For Class III, IV and V Trailer Hitch # PC3.
For the most part, if you have a 1-1/4 inch receiver you will used the Pin and Clip For Class I and II Trailer Hitch # PC2 which has a 1/2 inch diameter and if the receiver is 2 inches... view full answer...
The usable length of the Replacement Threaded Hitch Pin and Clip # P5901 is roughly 3-1/4". I recommend measuring this on your 2-1/2" receiver to verify fitment as not all receivers will have the same dimensions. We do have the longer Locking Anti-Rattle, Threaded Hitch Pin # S64027 which has a usable length of 4-1/2" if the above pin and clip are not long enough. view full answer...
You can replace the threaded pin and clip for your Swagman XTC2 TILT Bike Rack for 2 Bikes # S64671 with part # P5902 or you can upgrade to the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks # S64029 to ensure that no one can take of with your bike rack. view full answer...
The Curt # C45458 ball mount uses a 5/8" hitch pin with clip or locking mechanism.
For a simple pin and clip, you can use the Draw-Tite # PC3, or if you prefer a locking hitch pin I recommend the Fastway # FA86-00-3050 Receiver Lock.
I have attached a link to these product pages and a video review of the BW lock. view full answer...
The hitch pin you need is going to depend on which size receiver you have on your hitch. More than likely you have a 2" receiver, which means you want a 5/8" diameter hitch pin like the Curt Pin and Clip for 2" and 2-1/2" Hitches - 5/8" Diameter x 3-3/16" Span # C21510. Just to be clear, the cotter pin is the smaller pin that comes with the hitch pin in order to secure it.
If you're looking for a ball mount and have a 2" receiver, I recommend the etrailer Ball Mount Kit - 3/4" Rise or... view full answer...
Yes you can absolutely use a standard pin and clip with the Fastway # FA42-00-2825. Any 5/8" diameter pin with at least 3-5/8" of usable space will do fine. I recommend the Gen-Y hitch pin # 325-GH-099. This will be very similar to the pin and clip that comes with the Fastway # FA42-00-2825. If you have no need for a lock it will do just fine. view full answer...
It looks to me as if you have the Curt 4 Bike Rack part # C18030. I do have a replacement folding pin and clip that will work for you , however, Curt does not offer this pin and clip as one of their replacement parts. After a bit of research I have concluded that the Replacement Folding Pin and Clip for Swagman XTC4 4-Bike Carrier part # SP487 will work with the Curt bike rack. view full answer...
Your 2008 Cadillac Escalade should have a factory hitch size of 2 inches, but I would recommend to make sure by measuring the width of the opening on your factory trailer hitch. If it measures 2 inches then the Indiana University Logo Hitch Cover, part # AMG100178 will fit in your factory hitch.
If your hitch does not have a pin and clip available, you will also need the Hidden Hitch Pin and Clip, part # PC3 to install the hitch cover to your vehicle. If you want to lock the hitch cover... view full answer...
No, you do not need a pin and clip such as # PC3 if you are using the Let's Go Aero Anti-Rattle Pin Lockset # 63232.
The lockset will take the place of your pin and clip while also working as an anti-rattle device. view full answer...
Yes, the 1-1/4 inch etrailer.com Trailer Hitch Receiver Lock, # e98879, is an excellent choice to secure your Surco cargo carrier to your trailer hitch on your 2012 Honda CR-V. This lock will feed through the hitch pin hole on your trailer hitch just like your pin and clip and the locking end will ensure your cargo carrier cannot be removed while you are away. view full answer...