Yes, it is priced per drum. Dexter Trailer Hub and Drum Assembly Part # 8-285-11UC3 comes with everything you need to install. Check out the video I've included to see everything that comes with. view full answer...
The Electric Trailer Brake Kit # AKEBRK-35-SA only includes the left and right side brake assemblies for one axle. You will need 2 hub/drums like the Easy Grease Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K which fits a standard #84 spindle which is found on most 3,500lb trailer axles. These hubs have a 5 on 4-1/2" bolt pattern. If you have a different size spindle or bolt pattern please let me know and I can help you find the correct hub/drums. view full answer...
The Dexter Trailer Hub and Drum Assembly # 8-174-5UC3 is a single hub and drum assembly. If you need a pair you will have to order a quantity of 2. view full answer...
The Dexter Nev-R-Adjust Electric Trailer Brake Assembly Kit part # K23-478-479 or part # K23-478-00 for left and part # K23-479-00 for right does not come with a hub/drum. If this is needed you can use the Dexter Trailer Hub and Drum Assembly part # 84546UC3-EZ as most 4,400 b axles use 3,500 lb hubs/drums. view full answer...
Dexter Trailer Hub/Drum Assembly # 8-430-5UC3 is a one piece assembly, hub and drum together. It fits Dexter 9k and 10k general duty axles made after 07/01/2009.
Hub # 8-288-3UC1 is a 2 piece for 9K axle (after 10/89) and 10K axle (through 7/1/09). It does not come with the drum or mounting bolts. For a non-ABS drum use # 9-44-1. For an ABS version use # 9-44-3. And for the mounting bolt use # 7-245 (quantities of 1). view full answer...
For the Trailer Hub and Drum Assembly, # 8-389-81UC3, with the cartridge style bearing, the parts are pre-fitted into the center of the hub so you will not have to do it. view full answer...
The brakes are not included with hub and drum assemblies, including the 7K E-Z Lube Dexter hub and drum you asked about, but we do have the correct fit; the parts you need are the following:
- Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle # 42866UC3-EZ
- Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs # 23-180-181
- (Quantity of 10) Brake Mounting Bolt for 12" Brake Assembly # 7-5
- (Quantity of 10) Lock Washers # 38LW
The electric... view full answer...
A drum, or hub and drum, is not included along with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469.
These are 3,500 lb electric trailer brakes that fit a 10 inch drum, so if you do need a new hub and drum I have added a link below to our selection of 3,500 lb hub and drums so you can get the correct one. I have also added a link below to a video install of the # 23-468-469 brakes for you to take a look at. view full answer...
No, the etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10 Diameter - 5 on 4-1/2 Item # AKHD-545-35-EZ-K that you referenced comes as a single hub and drum assembly so you need to purchase 2 of them for each axle on your trailer.
Attached is an installation video that you can check out. view full answer...
The Trailer Hub and Drum Assembly part # 8-407-5UC3-EZ is sold individually or as a quantity of one. It will require two per axle for a complete set. view full answer...
The Electric Trailer Brake Kit # AKEBRK-35-SA does not include the drums. If you happen to need a new hub and drum assembly for a trailer you are going to need know a few key pieces of information. The first thing you will need to know is the bolt pattern of your hubs. You also need to know is what spindle you have on your trailer.
To do that you can either get the inner and outer bearing numbers from a hub or use a dial caliper to get exact measurements of the spindle, both bearing... view full answer...
The Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 do not come with the brake hub/drum. Because these are the 3,500 lb axle kits, I can confirm that the Dexter drums for these assemblies are the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 or if your spindles have the integrated grease zerk # AKHD-545-35-EZ-K.
I've attached an article to help further with bearings and seals to... view full answer...
The Dexter Trailer Hub and Drum Assembly for 5200-lbs Axles # 8-201-5UC3 is sold as a single assembly, so you would need 2 of these for a single axle trailer, or 4 for tandem axle if you're replacing all of them. view full answer...
The Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3 you were looking at is sold as an individual hub, and this is the same for all of the hub assemblies on our website.
You will need two replacement hubs per axle.
I included a video of the # 84546UC3 for you to take a look at. view full answer...
Not a stupid question at all. The Dexter Trailer Hub & Drum Assembly, part # 8-388-80UC3 is sold individually.
If you find that down the road the inside of the drum is scored it can be resurfaced. The cartridge bearing for this assembly is part # 31-73-3. There is only one bearing for this hub and drum. view full answer...
The Trailer Hub and Drum Assembly # AKHD-545-2-1K comes in a quantity of one, so if you wanted to get two of them you would simply need to hit enter "2" in the "Quantity" box on the product page.
I have added a link to a video review for you as well of the Trailer Hub and Drum Assembly # AKHD-545-2-1K.
This does come pre-greased though it is recommended you re-pack your bearings every year and for that I recommend the Prime Guard Wheel Bearing Hi-Temp Red GreaseĀ # L11380; for a bearing... view full answer...
The brake hub/drums are sold separately from the hub/drums.
The # AKEBRK-35-SA 10 inch self adjusting trailer brake assemblies are compatible with a 10 x 2-1/4 inch brake hub/drum usually found on a 3500 lb axle. The spindles of a 3500 lb axle are typically compatible with a L44649 outer and a L68149 inner wheel bearing and a grease seal with a 1.719 ID and a 2.565 inch OD. Most 3500 lb rated hubs would use a 5 lug on 4-1/2 inch bolt pattern.
So, I'd recommend checking the reference numbers... view full answer...
The Electric Trailer Brake Kit # AKEBRK-35-SA includes the left and right side brake assemblies. It will not include any bearings or hubs. For the hub you will need two like the Trailer Hub and Drum Assembly # AKHD-545-35-EZ-K. This is a hub/drum which includes the common size bearings and grease seal used on a 3,500lb axle. This uses a Inner Bearing # L68149 (1.378" ID), Outer Bearing # L44649 (1.063" ID) and Grease Seal # 58846 (1.719" ID).
Please let me know if your trailer spindle... view full answer...
The Dexter Trailer Hub and Drum Assembly for 5,200-lb Axles # 8-201-5UC3 is one hub with the races, bearings, grease cap, and dust cap included. view full answer...
The Dexter Trailer Hub and Drum Assembly - 7K lb E-Z Lube Axle - 12" - 8 on 6-1/2 - 5/8" Studs # 8-219-18UC3 will come as a single hub/drum. If you are looking to replace both on an axle, you will need to order two to complete it. However, these do come with all the bearings, seals, caps, and lug nuts needed, so other than grease, like the LubriMatic LMX Industrial Strength # L11390, there will be no other parts needed. view full answer...