bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Keystone Outback Travel Trailer


  • Recommended Bearings for a AL-KO T44 Axle
  • Hey Ken. The AL-KO T44 axle is obsolete and no parts have been made for it since 2015. I do not have a replacement hub for you. However, based on my research, the AL-KO T-44 axle spindle on your trailer uses the item # L68149 inner bearing and item # LM67048 outer bearing. I recommend verifying this on your trailer by simply pulling the hubs and checking for the numbers that should be stamped onto the bearings themselves. The only hub that matches these bearing sizes item # 8-407-5UC3-EZ...
    view full answer...

  • How to Find the Correct Replacement Lead Leg for 5th Wheel Landing Gear
  • Thanks for all the information! You are correct that is the lead leg because it is closest to the gear and the motor. However, in order to determine which replacement lead leg you need, you'll need to find the model of the landing gear on your trailer and measure it's outer tube length. This is something we have no way of knowing and I wouldn't want to assume anything. For example, if you do have a Venture landing gear with legs that measure 29-1/2" you can replace the leg with the Replacement...
    view full answer...

  • Replacement Hub For An AL-KO T44 3,500lb Axle With AL-KO 9012 Hubs
  • Hi Ken, There doesn't seem to be a reliable listing of the bearing and grease seal part numbers so you'll need to measure your spindle with a digital caliper # PTW80157 at points B, C, and D from the diagram below. Once we have the inner diameter for the bearings and seal and we know the wheel bolt pattern I can pick out a new hub.
    view full answer...

  • Replacement AC Unit Recommendation for RV
  • Hey Brian, for a replacement AC unit for your RV I would recommend the Furrion Chill Unit part # FR52PR as we have found that it is very quiet and blows the coldest air. This fits whether the RV has a ducting setup or not and comes with a manual control vent assembly.
    view full answer...

  • What Size Socket Do I Need to Change the Anode Rod?
  • You'll need to use a 1-1/16" deep socket to install the Camco RV Water Heater Anode Rod item # CAM11563.
    view full answer...

  • Replacement Brake Assemblies and Bearing Kit for a 2012 Keystone Outback RS250
  • The correct Nev-R-Adjust brakes for your 2012 Keystone Outback RS250 are the Dexter item # 23-468-469.
    view full answer...

  • Adding Rollers to Slide Out of 2018 Keystone 260UML
  • Hey Vivien, so we have slide out rollers that you could use to add rollers to your Keystone like with the part # 295-000180 but it's really going to come down to using your best judgment how many you'd want to add based on the length of the slide out. If it's a wider slide out and you want a lot of support maybe three of these strategically placed would be ideal or if it's smaller just two.
    view full answer...