If your 2019 Keystone Montana 3791RD has overslung axles where the axle is above the leaf spring you'd want the part # SS26MV or if you have underslung you would want the part # SS33HR. view full answer...
The correct circuit board for your MaxxAir MaxxFan 4951KS fan is the Replacement Printed Circuit Board for MaxxAir MaxxFan Plus Roof Vents # MA10A04751KS. It also works with The MaxxAir MaxxFan 4751KS and 4761KS models as well. view full answer...
There isn't a plug-in style adapter for your application since the semi trucks have their brake lights separate from their turn signals. So what you'd want to do is install a 4-way first on the semi with the part # 119190KIT and then convert to a 7-way with the part # ETBC7 which would then allow you to also install a brake controller like the P2 part # 90885. view full answer...
From the specs available to me your 2019 Keystone Montana 3791 5th wheel is 40.42 ft. (485 in.) in length. I recommend the Classic Accessories PolyPro III Deluxe, # 052963750638. It has zippered panels for access to RV while covered and constructed with a triple layer PolyPro III top that repels the rain and vents inside water vapor out. view full answer...
Based on the GVWR I was able to find for your 2009 Montana 3000RK and the axle capacity that would be needed for that the correct MORryde sheer spring you'd need would be the part # MR79UR which is correct for axle ratings between 6,501 and 7,500 lbs which would be what your trailer would have based on it's total 15k GVWR and it being a tandem axle trailer. view full answer...
As long as the inside diameter of the existing brake drums is 12 inches and the existing pads are 2 inches wide, the # AKEBRK-7-SA self adjusting 12 inch brake assemblies would work perfectly for you.
Before replacing just the brake assemblies, you'll want to examine the armature surface of the existing drums (the inside surface of the drum where the face of the magnets ride) to make sure they're not grooved or pitted. If they are, you won't get good contact between the drum and brake... view full answer...
The Hollywood Racks RV rider part # HLY64FR is the perfect bike rack for your situation as it has the capacity needed for the heavier e-bikes, can fit tires up to 5 inches in width, and uses frame clamps to secure the bikes that won't interfere with your fenders.
I attached a review video link for this rack for you to check out as well. view full answer...
While Thule does not yet have any bike racks that match your needs, I do have other recommendations from other brands. For absolute versatility, I've been very impressed by the Hollywood Racks RV Rider # HLY64FR. It checks off ALL the boxes: fat tires, 80lb heavy e-bikes, 5th wheels, step-through frames, carbon fiber frames. It's amazing how it can handle all those different specialty specs when only a couple years ago, bike racks were proud of being designed for just one of them. The only... view full answer...
I have a great option for you. I confirmed with Swagman that the Swagman Chinook Bike Rack for 2 Bikes # S64683 is not compatible on your 2019 Keystone Montana HC 330RL Fifth-Wheel due to the extra torque experienced when the trailer goes over bumps or rough terrain.
Although, the Swagman Original - 3 Bike Rack # S64152-2 will work with your 2019 Keystone Montana HC 330RL Fifth Wheel. The steel construction of the Original will give it extra strength to withhold the torque your trailer... view full answer...
Since you have a MaxxAir roof vent currently the cover you'd need is the part # MA00-955003 for a solution that would attach directly without modification or drilling. The # DMC38FR can work with what you have too but it may or may not end up requiring drilling/modification. view full answer...
I recommend the Westlake ST235/80R16 Radial Trailer Tire # WE76FR for your 2018 Keystone Montana 3120RL. I did confirm that this is the correct tire size with Keystone for your Montana. The radial construction gives you a long tread life as well as better handling characteristics on the highway.
With this tire you get 2 years of complimentary roadside assistance 24 hours a day, 7 days a week, and 365 days a year from anywhere in the United States, Canada, or Puerto Rico through Lionshead.... view full answer...
The Valterra Check Valve for RV Fresh Water Systems, # P23415LFVP has the 1/2" MPT or Male Pipe Thread, there is no O-ring needed. I suggest using the Valterra PTFE Thread Seal Tape - 1/2" Wide x 520" Long
Item # A05-0265. view full answer...
We do have solar kits from Go Power like the Go Power Solar Elite Charging System # 34282184 which would include the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055, so you would not need to pick up one separately.
Or you do have the option of getting the Go Power Industrial Pure Sine Wave Inverter Charger # 34280055 individually and adding the other solar components down the road. view full answer...
The etrailer.com sticker you see on the Furrion RV Observation System # FOS05TASF that you referenced are only present on the particular units that we shoot pictures and videos with. The etrailer.com sticker will not actually be on the Furrion Camera System that you receive.
I have attached a short video demonstration on this system that you can check out as well. view full answer...
The best cover for your 2005 Keystone Everest 294L would be the Adco Olefin HD part # AD59ZR. This provides the best protection in all climates, is correct size for a snug fit, has easiest install, and has zippered access panels like you are wanting as well. view full answer...
The issue is that the ride quality at the rear of a RV/fifth wheel is MUCH rougher than at the rear of a vehicle. This is due to much nicer suspension being used on vehicles and also much shorter distances between the rear axle of the vehicle and the rear bumper. The longer this distance is the more pronounced and exaggerated the bumps are when you hit them similar to how the back seats in a bus are the roughest.
The Hollywood Racks RV rider part # HLY64FR that you referenced was reinforced... view full answer...
The Replacement Controlled Motion Hinge for RV Entry Door # LC95VR that you referenced is designed to fit standard RV doors like what you have so this would fit and work great. Your door will no longer freely open or close too as it will stop wherever you let the door go. view full answer...
The rear sensor of your Lippert Ground Control will be precisely between the rear jacks, dead center so if you check midway between them this is the area where you should find the sensor. I attached a picture of what it would look like. view full answer...
The Furrion Chill HE AC units are what I recommend the highest because they blow the coldest and they are a lot quieter than other options. So for a ducted application like your 2006 Montana Mountaineer you would want the part # FR92PR for a 15k BTU unit or the part # FR52PR for a 13,500 BTU unit. Both of these come with distribution boxes as well. I would recommend the 15k unit based on the size of your RV unless you won't be in very warm climates. view full answer...
Go To Results