Yes the Thule Hullavator part # TH898 is a fit for the Rhino Rack aero bar roof rack you have on your 2012 Jeep Wrangler Unlimited part numbers # RRVA150B-2, # RRRLT600, # RRRJKB1, and # RRQMFK06. view full answer...
Yes, the Westin Trailblazer Rear Bumper # 42-3015 that you referenced has been confirmed as a fit for your 2016 Jeep Wrangler so it would be a great option and would work well.
I confirmed the fit with Westin. view full answer...
The most popular hitch we offer that is a confirmed fit for your 2016 Jeep Wrangler Unlimited is the Curt hitch part # 13432. This hitch has the best price by far and is made in the USA so it's a no-brainer if you ask me. This is compatible with your Rubicon bumpers as well.
I attached an install video for you to check out as well.
If you plan on doing some towing I recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4-inch rise or 2-inch drop and one... view full answer...
If you choose to pull your motorcycle trailer with your 2012 Jeep Wrangler Unlimited, I recommend using a weight distribution (WD) system. Since the dry trailer weight is just over half of your vehicle's weight it is a good idea to use a WD system.
However, it can be difficult to find a system that is compatible with a V-nose trailer because of the length of frame required for the WD system. Most systems require 28-30 inches along the trailer's frame to mount the spring arm brackets.... view full answer...
For what you are looking for the Supertop NX, # B5685335 or # B5482317 is going to be the best option. It is not as labor intensive as other Jeep soft tops for the 2013 Wrangler Unlimited. I have linked a video review for you.
The next step down from there in terms of ease of use is the Trektop # B5680535 or Trektop NX, # B5692317 or # B5682335. A little more work involved and it doesn't really fold as much as the Supertop NX. Still a good top and versatile.
I think you would be more... view full answer...
I would be happy to help you find the correct weight distribution hitch for towing your 3200lb RV with your 2012 Jeep Wrangler Unlimited, but you will need to find your total tongue weight as that is the deciding factor on the correct weight distribution hitch.
Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your Jeep. The easiest way to get an accurate tongue weight measurement is by using a tongue... view full answer...
For your 2019 Jeep Wrangler Unlimited Rubicon with Warn Winch I assume you are using the factory steel bumper. If that is the case then you will be able to simply use the Demco Tabless Base Plate Kit - Removable Arms # DM9519339 which are a confirmed fit. view full answer...
We can definitely get your 2017 Jeep Wrangler Unlimited set up for towing, and what you'll need is a trailer hitch receiver and wiring harness. Let's go ahead and start with the hitch, and the best option for that on your '17 Wrangler Unlimited is from Draw-Tite:
- Draw-Tite Max-Frame Trailer Hitch Receiver # DT78MR
There are a few reasons the # DT78MR is the best hitch for your Wrangler, starting with its strength, as it has the highest capacities of any hitch for your Jeep, being... view full answer...
For your 2017 Jeep Wrangler Unlimited with a hard top the three crossbar Rhino Rack roof rack part numbers # RRVA150B-3, # RRRLT600-3, # RRRJKB1, # RRQMFK05, and # RRQMVA05 would be an excellent option with more than enough weight capacity for the tent you have. Three bars is going to give you a more stable base for the tent so it is for sure the way to go.
Cost and availability is available at the attached link for the mentioned roof rack view full answer...
The Thule EasyFold XT E-bike rack part # TH903202 that you referenced would be an excellent fit for your 2020 Jeep Wrangler Unlimited Rubicon. If you don't have a hitch already the Draw Tite part # DT78MR is the one to get as it provides the best clearance for fitting past the rear spare. This hitch for sure would have the needed clearance and would do an excellent job carrying the rack.
If you already have a hitch you'd need to measure from the center of the hitch pin hole out to the... view full answer...
I would be happy to recommend some components for you, but there is no disc brake kit currently available with the 5 on 5" bolt pattern, and none of the 5 on 5" bolt pattern hubs that are available will work with 17" wheels. You will want to stick with a 15" wheel as that is the largest wheel that will work without any issues.
Starting with the Timbren kit I recommend the Timbren Axle-Less Trailer Suspension System - Spindle w/Brake Flange - Off-Road Tires - 2,200 lbs # ASR1THDS02.
For... view full answer...
Yes, the Rhino-Rack Pioneer Platform Rack with Backbone Mounting System # JB0893 does come with all of the mounting hardware you mentioned and is a confirmed fit for the hard top of your 2020 Jeep Wrangler Unlimited. With just this part number you'd have everything needed to install the platform. view full answer...
For your 2019 Jeep Wrangler Unlimited I recommend the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267.
This is our go to wiring kit in tons of cases. It has the brackets, cable, diodes and everything you will need to get your lights working properly.
I linked a video that my buddy Shane did on the wiring kit on a 2019 Jeep Wrangler Unlimited. view full answer...
We have the Hollywood Racks RV Rider part # HLY64FR which has the best clearance for fitting past the rear spare of a 2020 Jeep Wrangler. If you check out the picture I attached you can see that it has plenty of clearance without using a hitch extender. Of the bike racks we carry it has the best rear spare clearance as it has a distance of 12 inches from the hitch pin hole to the nearest wheel tray. view full answer...
From the center of the hitch pin of the Thule EasyFold XT part # TH903202 to the nearest upright portion of the rack is 8 inches so to determine how much of an extension you may need you would need to measure from the center of your hitch pin out to the furthest point out on the rear spare and compare that to the 8 inch measurement I mentioned.
Most likely an 8 inch extension like the part # C45791 would work well for you. If you needed something longer we have the # e48YR which is 18... view full answer...
The 7-way harness kit part # 82210214AB that you installed on your 2016 Jeep Wrangler does basically give you the factory tow package but it does not include brake controller wiring so you'll have to hardwire the Prodigy P3 part # 90195.
For a wiring kit to install the brake controller to the 7-way you would want the Wiring Kit for 2 and 4 Brake Electric Brake Controllers # 5506. This will provide the power source and ground for the wiring for the brake controller. You will need to test... view full answer...
The only solution would be to use the Blue Ox base plate kit adapter for Off-Road Bumpers with 1 inch D-rings part # BX88358 with the bumper you go with as long as it has D-rings and then you can use the Blue Ox tow bar you have now. view full answer...
Sounds like you need a 7-way to 7-way wiring cable to connect your 2015 Jeep Wrangler Unlimited to your RV when flat towing. You will need a 7-way plug and lead wire and a 7-way connector end.
I recommend the WesBarg 7-Way, RV Style Connector # WG54006-043 and a Pollak Black Plastic, 7-Pole, RV-Style Trailer Connector # PK12706. You will have to wire the Pollak connector on the other end of the WesBerg cable to connect your RV and Jeep. I like the coil design of this cable because it... view full answer...
The first thing you need is the base plate kit part # 1444-3 that you referenced which fits your 2017 Jeep Wrangler Unlimited Recon Rubicon.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which makes the setup very easy to connect/disconnect.
For lighting/safety cables, locks, and covers... view full answer...
Since you have a factory 4-way installed on your 2012 Jeep Wrangler Unlimited the easiest way to convert it to a 7-way is the part # 37185 which allows your current 4-way to plug right into the adapter.
If your trailer has brakes you would need the # ETBC7 instead of the # 37185 and a brake controller. This kit comes with everything needed to wire up the 7-way and install a brake controller.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is... view full answer...