I have included a image below showing one of the Thule roof racks installed on a Jeep Wrangler having the Sky One-Touch roof. They used the Crossbars # TH711520 with the 8" Tall Feet # TH33ZR. I could not find any images with the roof open but you can take a measurement from your rain gutters to the top of your fabric as it folds to verify the 8" feet are going to give you the necessary clearance. We also have the 11" Tall Feet # TH93ZR if you are going to need even more clearance. view full answer...
Hey Gerry,
For a 2024 Jeep Wrangler Rubicon 4xe I have the following recommendations:
Baseplate: Roadmaster Direct-Connect Base Plate Kit # RM-521453-5. If you have an aftermarket bumper then let me know and I can look for a compatible alternative.
Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR. This tow bar comes with safety cables included and has a built in rise/drop to help keep it level between the motorhome and Wrangler.
Tow Bar Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire... view full answer...
Your 2023 Jeep Wrangler 4xe will require the Blue Ox Base Plate Kit # BX1139. This is different than the Base Plate # BX1126 you have on your 2018. You will be able to remove the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524 and reinstall it on your 4xe. We do have the Charge Line # BB54FR, Breakaway System # HM39340, and Dash Connector # HM39342 if you prefer to leave those parts on your old Jeep since you will not be able to reuse the baseplate.
We do have the Tow... view full answer...
The Exposed Racks Roof Rack # ER84FR will fit with the Sky One-Touch roof on your 2024 Jeep Wrangler 4xe but the roof was not intended to be opened with the rack installed. If you are wanting to open the roof you are going to want to look at options like the Thule # TH711520 with the 8" # TH33ZR or 11" # TH93ZR tall legs. I always recommend measuring the height your roof material sits above the gutter rails and also considering how the kayak carrier is going to mount on the crossbars. Because... view full answer...
Hello Kyle. The Air Lift 1000 Coil Helper Springs # AL60829 will not be compatible with the coil spring lift spacers on your 2021 Jeep Wrangler Sahara. As you said, it appears the spacers would obstruct the air line, so they would have to be removed in order to use the coil helpers.
A better option would be to use the Timbren Rear Suspension Enhancement System # TJRJK. These will simply replace/upgrade the factory bumpstop. Timbren also offers spacers that can be used to compensate for... view full answer...
Go To Results