When installing the Curt trailer wiring harness part # C56334 you do have to run a wire from the harness to the vehicle battery.
I attached a link to a page that covers running this wire though. view full answer...
The Curt T-Connector # C55382 you referenced would be the correct harness for your 2006 Jeep Liberty so long as it did not come with a factory 7-way. I have included a link to an install of this harness on an '06 Liberty for you to take a look at. If your Jeep does have the factory 7-way you would need T-One Harness # 118381.
As for the lights, Standard Trailer Light Kit # TL29BK is going to work for your application as well. I have included a link to a video install of this kit for you... view full answer...
I really like the etrailer Trailer Hitch Receiver # e85AR for your 2012 Jeep Liberty because of the matte black finish. I've used a few of these on my vehicles and I like how well they blend in with the vehicle trim and hide scratches from road debris.
If you're in the market for a bike rack I recommend checking out the Hollywood Racks Sport Rider SE # HLY84FR which is just a great, all-around bike rack that's compatible with pretty much everything on the market plus it comes with industry... view full answer...
The bolts that come with the Curt hitch part # C12245 are size M12x7.75.
We also sell replacement hardware for all of the hitches we offer with the part # RHK. view full answer...
You will be able to keep your Tekonsha Prodigy P2 Trailer Brake Controller item # 90885 connected and use your 7-way connector with no issues when flat towing. The Demco SBS Stay-IN-Play DUO Supplemental Braking System proportional item # SM99251 is not affected by the brake controller. view full answer...
If the fully loaded and ready to tow tongue weight of the camper PLUS the weight of anything stowed in the cargo area of your Liberty behind the rear axle weighs less than its 400 lb maximum capacity, the Reese Steadi-Flex # 66557 you referred to would work very well.
If you find that the weight of the gear in the Liberty puts the tongue weight close to or above 400 lbs, I'd recommend a higher rated system like the Reese Steadi-Flex, part # RP66558 which is rated for trailer tongue weights... view full answer...
Brake controllers are not vehicle specific so any brake controller we carry can be installed on your Jeep Liberty. Along with a brake controller you will need a Brake Controller 7 and 4 Way Installation Kit, item # ETBC7, or item # ETBC6, because your vehicle does not have factory wiring installed for a brake controller.
You will also need a working 4-Way trailer connector either item # 118524, if you do not already have one. I have posted a link below to an FAQ article and a video of... view full answer...
I was able to measure several hitch mounted bike racks that we have available in our video studio and have found a bike rack that will clear your spare tire, carries up to 4 bikes, and has a tilt away function.
The Thule Hitching Post Pro # TH934XTR is a hitch mounted bike rack that will fit in both a 1-1/4 and 2 inch hitch receivers, and uses the same hitch pin hole. It will hold up to 4 bikes and has folding arms, and a tilting away function. Also the distance from the hitch pin should... view full answer...
All of the hitches we currently offer for a Jeep Liberty will fit years 2002-2007 and no other vehicles.
The trailer hitch I recommend for your 2004 Jeep Liberty is the Draw-Tite part # 75128. It's a Class-III with a 2-inch receiver. The maximum gross trailer weight is 5,000 pounds and tongue weight capacity is 500 pounds.
If you plan on doing any towing, the wiring harness kit you need is the Tow Ready # 118524. Or if you already have a factory tow package then go with Hopkins custom... view full answer...
The recommended ballmounts for the 2004 Jeep Liberty with have a rise of 3/4 of an inch, and a drop of 2 inches. This would put your hitch ball at the most common trailer size, but to confirm it would work for your application I do recommend measuring.
To find the required rise or drop for your particular trailer, you would first measure from the ground to the top of your hitch opening. If a hitch is not yet installed, you can also get close by measuring from the ground to a point just... view full answer...
Thanks for the kind words, and based on what you said the over-the-hub disc brake kit that will work is the Kodiak Disc Brake Kit # K2R35D.
This will work with your 4-bolt flange, 14 inch wheels and is rated for 3,500 lb axles so it is the right weight capacity for your trailer with a GVWR of just under 6,000 lbs. The only thing you will want to ensure is that you do have a 5 on 4-1/2" bolt pattern, as you didn't quite specify that, though it looks like that's what you have. Just to be... view full answer...
Yes, we do have a trailer hitch receiver that is a fit for your 2004 Jeep Liberty, and what you will need is the Draw-Tite Max-Frame Trailer Hitch Receiver # 75128.
Draw-Tite makes the highest-quality trailer hitches, and this is a bolt-on installation that won't require drilling into your Jeep's frame so it's the perfect option for you.
If you also plan on doing some towing with your Liberty and need a trailer wiring harness, the correct fit is the T-One Vehicle Wiring Harness with... view full answer...
For your Roadmaster Falcon Tow Bar, there are two adapters that will work with your Blue Ox base plates. You can use either the Roadmaster Tow Bar to Blue Ox Brackets Adapter # RM-031 or the Blue Ox Base Plate Adapter Brackets for Roadmaster Tow Bars # BX88151.
The RoadMaster Nighthawk or Sterling Tow Bars to Blue Ox Brackets Adapter # RM-031-5 will not fit your specific tow bar. I've attached a help article to assist. view full answer...
The etrailer.com Folding Cargo Carrier, part # e98874, has 9-1/2 inches of clearance from the hitch pin hole to the closest surface of the cargo carrier when folded and chances are this is more than enough clearance for your spare tire.
The only way to be sure it will fit is to measure. Take a dowel rod or a yard stick and lay it against the spare tire. Measure from the center of the hitch pin hole straight out to the dowel rod. If it is greater than 9-1/2, then the carrier will not fit... view full answer...
The Tow Ready Vehicle To Vehicle Taillight Converter, # 118158, you have referenced will not be needed since you will be staying with a 3-wire system (separate stop and tail lights)on both of your vehicles. The converter is only needed if you had a 2-wire system (combined stop and tail lights) on the towing vehicle and a 3-wire system on the vehicle being towed.
I would recommend using a diode system to wire your vehicle because the diodes will prevent feedback from going from the taillights... view full answer...
You will need to measure to find out if you will have enough clearance for the Thule Double Track Bike Rack, part # TH990, to clear your spare tire. The distance from the hitch pin hole on the rack to the closest upright portion of the rack that could interfere with the spare tire is 11-1/2 inches.
You will want to measure 11-1/2 inches back from the pin hole on your hitch to see if that distance will clear your spare tire. view full answer...
The wiring harness I recommend for your 2004 Jeep Liberty is the T-One Vehicle Wiring Harness, part # 118524.
This harness simply plugs into the Jeep wiring located behind the tail lights. You will then run the hot lead up to the vehicle battery. I have attached a link to an installation video for this harness on a liberty you can check out.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical... view full answer...
A longer ball mount in a hitch like the Curt part # 13044 which is confirmed as a fit for your 2005 Jeep Liberty would be what you need. It sounds like you already have a hitch though so for a ball mount the # BH20 has a distance of 13-1/4 inches from the hitch pin hole out to the ball mount hole so it would be a great option.
This ball mount has a 2 inch drop/3/4 inch rise so if you need a different rise/drop you would want to check out the link I attached to the page that has all of... view full answer...
Most rooftop cargo baskets' hardware is designed to work with multiple roof rack bar shapes. For instance, the Curt Roof Mounted Cargo Basket # C18115-117 fits round, square, elliptical and aero bars, as well as most factory roof racks.
If you are able to install and tighten the existing mounting hardware then what I suggest is to simply use some thread locker like # LT37420 to keep the knobs from backing off as you drive. It is generally safer to use the hardware made for the cargo basket. view full answer...
Yes, both the Brake Buddy Classic 3 # HM39494 and Select 3 # HM39524 will fit your 2002 Jeep Liberty just fine. The legs on these systems are adjustable to accommodate different vehicle floors so fitment won't be an issue.
I'm not sure why that answer was given but it was incorrect. view full answer...
Go To Results