Since there isn't a trick to pushing the pin of a breakaway system back in it would seem like yours is damaged and the easiest and best solution it to replace what you have with a new switch like the # 3802348 that you referenced. Since all of the breakaway switches operate the exact same they are interchangeable between brands so this would work perfectly with what you have. view full answer...
In order to transfer the Roadmaster BrakeMaster System part # RM-9160 from one vehicle to other you'd need the RoadMaster Second Vehicle Kit part # RM-98160 which is assuming you have the RoadMaster BrakeMaster Replacement Air Cylinder part # RM-9100-50.
In regards to the seat adapter, you'll need to use the RoadMaster BrakeMaster Custom Seat Adapter part # RM-88287 on a 2014 Jeep Grand Cherokee. view full answer...
The Memory Mount Clamps for Inno Rooftop Cargo Boxes - Qty 4 # INBRP9 do not come with a new seal. I've attached photos of these mounts as they are often used for replacements or upgrades. The seal or molding is not available as a replacement part according to the manufacturer. view full answer...
The factory roof racks installed by Mopar are a Thule product. The correct replacment key for the mopar roof rack with key #E099 is the Replacement Key for Thule and Sportrack Racks and Carriers # THKEYN099.
You may want to consider ordering multiple keys to have a spare or two. view full answer...
If you're referring to the Lippert Quick Drop Tongue Jack part # LC733926, we don't have a replacement set screw or drive for this jack as they are not offered from Lippert as replacement parts. I would suggest you try your luck at a local hardware store as the only option we'd have for you is a new jack. In which case, I recommend switching to the Trailer Valet JXC Trailer Jack part # TV54FR which has the same drill powered option as the other jack but with a better finish and larger footpad. view full answer...
I do have the replacement safety cables for the Blue Ox Ascent Non-Binding Tow Bar part # BX4370 but they are only sold in pairs as the Blue Ox 7' Safety Cables part # BX88196. view full answer...
Yes, the 600-800 lb spring bars (Replacement Spring Bar for Husky Center Line Weight Distribution System part # HT32330) will work with the Husky Center Line Weight Distribution System part # HT32218 and they will be much better suited for the weight of your trailer. If you were to use the 800-1,200 lb spring bars you have now you would likely experience a very harsh ride which could then result in more wear on the vehicle/trailer.
The great news is that the other set of spring bars... view full answer...
Sorry about your keys! Fortunately, we do have some replacement keys available that fit Inno products such as the Inno Feet # INTR. However, in order to see if we carry the key pattern you need, we need to know the lock code that is usually etched on the lock cylinders. Typically, the code starts with a letter followed by three numbers. The numbers are located above the key insertion point. I linked a products page of all of the Inno replacement key codes we carry.
Feel free to respond... view full answer...
The Derale # D12906 is a universal-fit aftermarket part that will fit your 2007 Grand Cherokee if the space behind the grille and in front of the A/C condenser and radiator can accommodate its 13 by 7-3/4 inch dimensions. If the available space is to small to allow installation of the D12906, we have smaller plate-fin style coolers like part # D13502 that are actually more efficient at cooling your transmission fluid. This cooler would typically be installed so it would be last in line... view full answer...
Trailer breakaway kits are not trailer-specific but a replacement part like the pin and cable does need to match your current breakaway setup.
We have such items for Hopkins, Tekonsha, Curt and others and you'll see them all on the linked page. Just match the pin and cable by brand. Here are popular examples of this replacement part:
Hopkins # HM20051
Tekonsha # 2010-A
Bright Way # 3802350
Curt # C52020
You can also just replace the entire switch with # 3802348 if you prefer. The switches... view full answer...
If you have the Westin Sportsman Grille Guard # 40-0125 that is custom fit for your 2002 Jeep Grand Cherokee, then the correct replacement hardware kit is part # 40-012PK. This will include all the mounting hardware and brackets needed to install the grille guard on your Grand Cherokee. view full answer...
I'll start this off by saying that grille guards are going to be vehicle specific, so you won't be able to transfer a grille guard from a vehicle that wasn't a 1999 - 2004 Jeep Grand Cherokee. If you've got one off of one of those years, you'll then need to determine which brand of grille guard you've got. It's tough to tell what you've got just by looking at the bracket at the bottom, but if you know it came off of that generation of Grand Cherokee, we've got a couple options for you.... view full answer...
I was able to pull the # BX88154 and measure the washer versus the size stated in the # BX84-0089 kit. It was a confirmed match. So you will want to purchase the # BX88154.
It appears that since the replacement parts are similar from tow bar to tow bar for Blue Ox they just made one kit of replacements instead of selling them individually. view full answer...
The Demco Commander II Non-Binding Tow Bar - Victory Series - RV Mount - 2" Hitch - 6,000 lbs # DM9511012 typically comes with the connecting clevises to connect to the Demco Classic Base Plate Kit - Fixed Arms # DM9518072. However, if you need a replacement, use Replacement Connecting Clevis for Demco Commander Tow Bar # DM13582-81. It is sold as 1 connecting clevis, so you will need to change the quantity to 2. This is exactly what you need for your setup. I have attached a demonstration... view full answer...
The 80mm Carriage Bolt, part # 915-068-054 is actually the correct part, and is designed to have a round head.
You may be missing part # 853-0333-02 , a washer plate that allows for the 80mm carriage bolt to sit in the channel underneath the plate. This will give it the additional height from the larger carriage bolt the ability to tighten down the mounting brackets.
I've highlighted the carriage bolt, marked at GG, and the washer plate, marked as S, on the parts diagram from the instructions... view full answer...
The Mopar roof rack for your 2015 Jeep Grand Cherokee was made by Thule so their replacement key # THKEYN112 will work with your E112 lock cylinder. These come in a quantity of 1 so you might want to order a few and keep a spare in a safe place. view full answer...
The Draw-Tite Max-Frame Trailer Hitch Receiver # 75699 reuses the factory bolts that are in the frame. I recommend contacting your local Jeep Dealer to order these bolts. This will ensure that you get the right grade bolt and it will not cause issues later down the road. view full answer...
There are Mopar Roof Racks made by Thule so this could very well be what you have. If that is the case then Replacement Key for Thule Racks and Carriers part # THKEYN010 will work for you. view full answer...
I checked the Long Chih trailer website for details about the seals and bearings used on your model 202 trailer but I could not find that item on their site among their utility and boat trailers.
You can select the correct replacement grease seals in one of two ways. First, you can pull the old seal and check it for a part number. Please refer to the linked diagram for the usual appearance and location of a seal part number. You can search our site using the part number.
Or you can measure... view full answer...