We do have a complete Rhino-Rack roof rack for your 2021 Jeep Gladiator, though the crossbars, legs, and adapter are sold separately. That said, I can give you all the parts you need for the complete roof rack that fits your Gladiator, including the legs that mount to your rain gutters. What you need are the following parts:
- Rhino-Rack Vortex Aero Crossbars # RRVA150B-2
- Rhino-Rack Roof Rack Legs - Gutter Mount # RRRL110S5-2
- RLTP Leg Adapters for Rhino-Rack Vortex Aero Crossbars... view full answer...
I do have an option to get the Redarc Tow-Pro Elite Trailer Brake Controller # RED44FR plugged directly into your 2022 Jeep Gladiator and it will require absolutely no cutting or splicing to complete.
The Tekonsha Wiring Adapter # 3073-P is designed to snap directly into a port under your dash, but will not then plug into the # RED44FR. This is where the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness # 331-TPH-017 comes in. This will fit in between the # RED44FR and... view full answer...
While the side rails on the Pace Edwards JackRabbit Retractable Hard Tonneau Cover part # PE94FR do hang over on to the bed rails of the Gladiator some if the Jack Rabbit were installed first the TruckHero Elevate system should work out fine as long as it secures to the stake pockets rather than the clamp around style. I currently (May 2020) can't confirm the attachment method because the info has come down while they reintroduce the product. This should be relatively soon. view full answer...
According to Yakima the Trail Rail system will need to be removed in order to use the Yakima Outdoorsman 300 # Y01136-Y00410 on your 2020 Jeep Gladiator.
This is the case for all of the Yakima ladder rack systems. Currently (August 2019) there are no other ladder rack options so if you are wanting to use a ladder rack with your Gladiator you'll need to remove that system. view full answer...
These Titan Chains # TC3229S will fit your 2021 Jeep Gladiator LT285/70R17 size tires. The coating on these chains are going to make them extra hard so they can handle the hard surfaces you drive over. view full answer...
Yes, I have a great part for you that will allow you to flat tow your 2020 Jeep Gladiator after you upgrade the bumper. I recommend the Blue Ox Aftermarket Off-Road Bumper Adapter item # BX88357. This adapter lets you use your motorhome-mounted Blue Ox tow bar with your aftermarket off-road bumper. It is only for 1" D-Rings and you will want to verify with the manufacturer that the bumper is rated for flat towing. I have attached a picture of this adapter being used to give you an idea... view full answer...
The TruXedo Elevate Truck Bed Rack System # TX58NV is compatible with the BAKFlip MX4 tonneau cover # BAK77FR so you won't have any compatibility issues. view full answer...
That's a good question, and what happened was that when the 2020 Jeep Gladiator first came out, there was a brake controller harness manufactured by Curt that was thought to work with the Gladiator, but it turned out not to be the case. The leading manufacturer, Tekonsha, took their time and made a brake controller harness that has proven to work for a 2020 Jeep Gladiator with the factory tow package, the Tekonsha Custom Wiring Adapter for Trailer Brake Controllers - Jeep # 3073-P. These... view full answer...
We haven't gotten a chance to install or talk to somebody who has installed the Blue Ox Tail Light Wiring Kit # BX8869 on the 2020 Jeep Gladiator to be able to say with certainty that it will fit or not. This is a pretty universal kit but you will want to make sure there is enough room inside the tail light housing lens for the extra bulb and socket, which measure 2 inches and 1 inch long respectively. I recommend simply measuring the space you have available behind the lens to make sure... view full answer...
Since you have LED tail lights the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord Item # RM-152-98146-7 will not work.
Instead you'll need the Roadmaster Tail Light Wiring Kit w/ 7-Way to 6-Wire Connector - LED Bulb and Socket - Red Item # RM-152-LED-7. view full answer...
We can definitely get your 2023 Jeep Gladiator Rubicon with the factory plastic bumper set up for flat towing. I'll go ahead and list out below everything you need:
- Base Plate Kit: etrailer Invisible Base Plate Kit # e98967
- Tow Bar: etrailer XHD Non-Binding Tow Bar # e94ZR
- Wiring Kit (if Jeep does NOT have ParkSense proximity sensors): Roadmaster Universal Hy-Power Diode Wiring Kit # RM-15267
OR
- Wiring Kit (if Jeep has ParkSense proximity sensors): Roadmaster Smart Diode 7-Wire... view full answer...
So the trailer hitch receivers that fit your 2020 Jeep Gladiator, the Draw-Tite Trailer Hitch Receiver # DR64FR and Curt Trailer Hitch Receiver # CU74FR were both designed to fit a Gladiator without a hitch on it already.
In order to determine if the hitch will fit, you will need to see if your existing factory hitch will, in fact, come off. Some hitches are welded on and not bolted on, so you will need to check and see if Gladiator's hitch was welded on or bolted on and then compare it... view full answer...
The BedSlide Sliding Truck Bed Tray # BE89ER for your 2021 Jeep Gladiator is 57" long, 43" wide and the deck is 4-1/2" above the bed. The side rails will sit 1/2" higher at 5". You will need to compare this with your Molle panels to ensure they will not interfere with each other as we have not tested them on a Jeep like that in our facility. The base is made of a powder coated steel with composite decking above to take the abuse of objects being loaded onto the tray. view full answer...
I checked with Thule regarding the fits of their ladder racks on a 2020 Jeep Gladiator and can confirm that the Thule Xsporter Pro Truck Bed Ladder Rack # TH500XTB (Black) and # TH500XT (Silver) do fit your truck.
This ladder rack is highly adjustable and mounting it only requires clamping the rack onto your bed rails so you do not need to do any type of drilling or other invasive installation steps. The Xsporter Pro is going to be a quieter ladder rack than others due to its aerodynamic... view full answer...
Since you're keeping your trailer's tongue weight around 650 lbs, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control item # FA92-00-0800. This system works with trailer's that have a tongue weight range from 400 lbs - 800 lbs. The e2 has built in two point sway control that will help keep your trailer in line with your Lexus when you are driving down the highway.
I have linked an installation video below so you can see how this system is set up.
This system does not... view full answer...
We can get your 2023 Jeep Gladiator Mojave set up to be flat towed with Roadmaster parts, and I'm not surprised you've had good experiences with them, as they do have a deserved reputation for quality. I'll go ahead and list out all the parts needed to flat tow your Jeep:
- Roadmaster Direct-Connect Base Plate Kit # RM77VR
- Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676
- Wiring Kit: Roadmaster Universal Hy-Power Diode Wiring Kit # RM-152
OR
- For Jeeps With ParkSense... view full answer...
The best roof rack for your 2020 Jeep Gladiator consists of the Yakima 1A Raingutter Towers # Y00101 and Round 58" CrossBars for Yakima Roof Rack System # Y00409.
As you can see from the accompanying photo, which is from Yakima, this roof rack system will give your Gladiator a fantastic way to mount accessories like bike racks, kayak carriers or cargo boxes so you can get to your destination in style with all your needed gear.
I also recommend using the Yakima Same Key System (SKS) Lock... view full answer...
The Curt Trailer Hitch Receiver part # CU74FR is a fit for a 2021 Jeep Gladiator and an excellent option. If you don't want to drill through the bumper cover you can actually remove the bumper and install the hitch then re-install without drilling. That said, we don't offer any plugs for this specifically. view full answer...
The Roadmaster Tow Defender Protective Screening part # RM-4700 is designed to connect around the tow bar and any 2" tow bar will work and the base plate. It is specific to the Roadmaster Quick Disconnect base plates.
If this is what is equipped on your 2021 Jeep Gladiator you're in good shape. If you have a different type base plate let me know and I will be happy to see what we have as an alternative that would work for you. view full answer...
I will start by saying that the Tow Ready Tail Light Isolating Diode System with 4-Pole Connector # TR118821 will definitely work with your 2021 Jeep Gladiator. I included an install video we did on a Ram that will be very similar to how you will be doing it, but you will need to test your wires with something like the # PTW2993 circuit tester to make sure you are tapping into the correct functions. This kind of wiring is more involved than trailer wiring, so just take your time. I included... view full answer...
Go To Results