Yes, the Thule Hull-A-Port kayak carrier, # TH834, will fit the factory installed crossbars on your 2006 Jeep Commander. I have included a link to a video review of this carrier for you. view full answer...
I spoke with my contact at Bestop regarding the Tigertop for Jeepster Commandos, # B5131101, and your 1969 Jeepster Commando. I explained to her the details of your vehicle and she stated that the top will fit your vehicle. I have included a link to the installation instructions below and while I do not have any additional pictures other than what is on the product page, the instructions does have a parts break down you can view. view full answer...
The Thule Force Medium Rooftop Cargo Box # TH6356B that you referenced is designed to fit a range of factory-installed and aftermarket roof rack crossbars. It will accept both the standard and the sports crossbars offered on your Commander as long as their centers are at least 23-5/8-inches apart, when measured center to center.
You can confirm that this cargo box will fit on your Commander without interfering with full opening of the rear hatch by taking one simple measurement. With the... view full answer...
I have a solution for you. I confirmed with my contact at Superchips that the TrailDash TD2 Performance Tuner SU42050 does not work with the 5.7L V8 Engine - HEMI model of 2006 Jeep Commander. With that being said, a great alternative tuner is the Flashpaq F5 # SU3874. The F5 has pre-loaded tunes that boost throttle response, towing performance, and fuel efficiency. In addition, the F5 has the capability to activate Jeep-exclusive power levels and user-set options to maximize off-road capabiliti... view full answer...
The Rhino-Rack cargo basket, # RMCB02, will fit on crossbars that are up to 3-1/2 inches wide x 1-1/4 inches tall. And the crossbar spread needs to be 25 to 44 inches center to center between the bars. You will need to measure the crossbars on your 2008 Jeep Commander to determine fit.
If you do not have a roof rack on your Jeep then you can add one. I have included a link to the roof rack main page for your vehicle. Since there are so many possible roof configurations you will need to... view full answer...
The first thing to do before you start towing is to always check the owners manual or the car dealer for the GCVWR (Gross Combined Vehicle Weight Rating) of your vehicle. The GCVWR is the maximum allowable weight capacity for your vehicle, including the vehicle, trailer and contents.
You will need to check the hitch on your vehicle to make sure it has the correct weight capacity. Also, if you can add weight distribution to your hitch, to tow your 7,000 lb. trailer. The class or weight... view full answer...
To connect your Roadmaster Sterling All Terrain Tow Bar item # RM-576 to the removable arms of the Blue Ox Base Plate Kit item # BX1125 you will need the Blue Ox Base Plate Adapter Brackets for Roadmaster Tow Bars item # BX88151.
These adapter brackets bolt on to the end of your tow bar's arms to make your tow bar compatible with all Blue Ox base plates. I have linked an installation video below.
In order to flat tow your Jeep you will also need a wiring kit and a supplemental braking... view full answer...
As long as the cross bars on your roof rack are spread between 20" and 37", the Thule Roof Mounted Cargo Basket, part # TH859XT will bolt directly to them. This basket will work just fine with your Jeep Commander.
The basket uses a system of u-bolts, bar saddles, and threaded knobs that make installation and removal pretty simple.
They have an optional lock , part # TH450400. view full answer...
Your 2006 Jeep Commander with the Curt Front Mount Trailer Hitch Receiver Item # C31056 is not compatible to work with the Aries Grille Guard Item # AA1048. Even though both items mount in different locations the cross tube of the hitch and the upright plates on the guard are in the same location. On the guard there is also a lower cross tube that will interfere with the cross tube on the hitch. If you are wanting to be able to move a winch to the front of the vehicle I recommend going... view full answer...
The 7-way trailer connector on your 2010 Jeep Commander will need to have an active 12 volt signal in order for the Tekonsha Prodigy RF Wireless Trailer Brake Controller part # TK94FR to work for you. Although it most likely does have an active 12 volt signal, you will want to test the 7-way trailer connector in order to be sure.
To test the 7-way trailer connector for an active 12 volt signal you will need a circuit tester like part # ALL640595. Once you have a circuit tester you will... view full answer...
Yes, Draw-Tite trailer hitch # 36362 as well as the 2 inch Class III version # 75338 will fit the 2007 Jeep Commander Rock Mountain Edition. We have someone here who owns one and the hitches fit it just fine.
Since you are looking at the Class III hitch I also recommend etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip,... view full answer...
The Thule Quick Grip Mount Assembly # TH05738 does fit the 2006 Jeep Commander with either the Sport crossbars or standard crossbars from the factory. However, to use them with the Evolution cargo box you would have to make modifications to the box. And you would need to use cradle # TH8523387001 for each foot. The feet and the cradles are sold in quantities of one.
Making modifications to the cargo box can make it structurally unsound and not safe for use. I do not recommend making modifications... view full answer...
The Thule Roof Mounted Cargo Basket is designed to fit most OEM roof racks. The cross bars just need to be spaced between 20 inches and 37 inches apart. ( Most are. ) view full answer...
The crossbars on your 2010 Jeep Commander are wider than the u-bolts on CURT Cargo Basket, # C18115, can accept. There are some baskets that are listed as a direct fit to the Jeep factory crossbars.
You could use the Thule M.O.A.B., # TH690. This is a large basket at 40-1/4 inches Wide x 50-3/8 inches Long x 8 inches Tall.
A more economical option would be to go with Yakima MightyMounts, # Y03590, and the BasketCase Roof Rack Cargo Carrier, # Y07012. I have included a link to the installation... view full answer...
I spoke with my contact at Yakima and she informed me that the Yakima SkyBox NX 16 Cargo Box # Y95AV will work on the factory cross bars of your 2006 Jeep Commander.
I attached installation instructions for this product for you to check out also. view full answer...
When we installed the Curt hitch part # 13414 on a similar Jeep Commander as your 2006 model we found that from the center of the hitch pin out to the furthest point out on the rear bumper the measurement is 3-1/2 inches.
In case you were asking about the vertical distance between the hitch tube and the bumper I attached a picture to show that it fits right under that as well. view full answer...
The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118408 which fits your 2006 Jeep Commander will give you a 4-flat harness. A 4-way is a standard harness on trailers without brakes and it simply plugs into your Jeep's 4-way to power the trailer's lights. view full answer...
Transmission coolers like Derale Series 8000 Plate-Fin Transmission Cooler Kit part # D13504 are not vehicle specific; the fit really just depends on if you have the space in the engine compartment to fit the cooler. The Derale transmission cooler measures 11" wide x 12" tall x 7/8" deep and the ideal location for installation is between the vehicle's grille and AC condenser core. If you do not have enough space there, you would want to install it between the condenser and the radiator.... view full answer...
After doing some research, I have some answers for you. Let me start with I can not tell you for sure that the frames of both vehicles are the same width but I can assure you that the Roadmaster Sterling All-Terrain Tow Bar Item # RM-576 will work with the base plate kits on your 2007 Jeep Commander.
I recommend the Roadmaster MX Base Plate Kit Item # 1427-3 for your 2007 Jeep Commander. It will accommodate your existing Roadmaster tow bar Item # RM-576. I chose this base plate kit... view full answer...
To ensure that the Rhino-Rack J-Style Kayak Carrier # S512 will fit your 2006 Jeep Commander's factory crossbars, you will want to take a quick measurement. The # S512 carrier will fit crossbars up to 3-1/4 inches wide x 2-1/2 inches tall. I spoke with my contact at Rhino-Rack and confirmed that the carrier will fit crossbars up to these dimensions. As long as the factory crossbars on your Commander are no larger than 3-1/4 inches wide x 2-1/2 inches tall, the # S512 carrier will work well... view full answer...
Go To Results