The two blue wires for the # DMC79FR control box wiring are signal wires. They complete the circuit at the furnace control board when the furnace should be running. view full answer...
Steve, to replace your old UFP A-70 actuator I recommend going with the Dexter DX7.5L A-60 Brake Actuator # DX33FR. This is going to be a direct replacement, is made in the USA, and will work drum brakes. view full answer...
It looks like you have the Rack'em Fitz-All Enclosed Trailer Ladder Rack # RA-28 installed on your enclosed trailer's existing rain gutter rails. For a different trailer that does not have these mounting rails I recommend using a track type rack system such as the Yakima HardTop SL # Y01618 since we do not have adapters to allow installing the Rack'em to a flat roof surface.
This adjustable Yakima rack uses tracks that mount to the trailer roof (not to the side edge like the Rack'em) and... view full answer...
Since you are using shore power, you can replace your Coleman with an Advent 15,000 Btu unit and just need the wiring adapter. I really like the low profile units so I recommend going that route, and you can choose from either White or Black in color:
- White: Advent Air Low Profile RV Air Conditioner # ADV29FR
- Black: Advent Air Low Profile RV Air Conditioner # ADV56FR
- Adapter Wiring Kit for Advent Air RV Air Conditioners # ACCOLKIT view full answer...
Thanks for all of the details, Tony!
The best replacement for your application is the 25-1/4" Long 5-Leaf Double-Eye Spring for 6,000-lb Trailer Axles # e34SR. Trailer leaf springs can grow a little longer over time and will also be a little longer when under a load which is why what you measured is a little different. view full answer...
I prefer to go with one of the MORryde equalizers but you are going to need to measure your factory equalizer to determine if you will need the 14-3/4" # MR34AR or 10" # MR54AR. This measurement is going to be from the center of the front hole to the center of the rear hole where the shackle straps attach. You will also need to measure the length of your shackle straps and select either the 2-1/4" # MR46ZR or 3-1/8" # MR76ZR. This measurement is also going to be from center of hole to center... view full answer...
Hey Susan, to swap your surge brakes to electric over hydraulic, you're going to need to change out your actuator and add a proper brake controller.
For an actuator I'd recommend going with the Hydrastar Electric Over Hydraulic Actuator for Drum Brakes # HBA-10 if you have drums, or # HBA16 for discs.
From here, you'll need a brake controller. I recommend checking out the Tekonsha Prodigy P3 Trailer Brake Controller # 90195. This brake controller will work great with electric brakes,... view full answer...
Yes, the Replacement Head for Curt TruTrack Weight Distribution System # C17507 comes with a warranty. It is a limited lifetime warranty (one-year finish, one-year parts). view full answer...
Yes, the Replacement Screen Frame # BVC0573-32 has a cutout where your switch can go if you have one.
Regarding the lights, the Command Electronics 328-K-1020BLSM2 was discontinued back in 2022. The only version that is still around with the switch is the 3" # 328-K-1003BLS. What you have measures 4-7/8" in diameter.
The closest thing we currently carry is the Optronics 12V RV LED Puck Light # ILL45CB which is 4-5/8" and would need to be wired to a separate switch. view full answer...
Although we do not have any that are designed for a door that thin you can still use the Global Link Locking Baggage Lock Actuator Set with Mounting Plate # GL34FR you were looking at. All you need to do is add a thin piece of wood to the inside of the door to get it into the range of 0.7" to 1.25" thick.
I attached an installation video below for your reference. view full answer...
We have trailer roof vents that have an included wall switch you can use, but it is not recommended to use one with the MaxxAir MaxxFan Mini Roof Vent with 12V Fan # MA00-04301M because this vent is meant to have 12 volt power constantly, and a switch interrupts the voltage, which could damage the circuit board.
If you'd like, what you can use instead is an option from Ventline which includes the wall switch for simple use:
- Ventline Ventadome Roof Vent with 12V Fan and Wall Switch... view full answer...
We can definitely help Wayne but you'll need to first install a 4-way like with the Curt part # C59236 which is a universal style 4-way that fits your Sprinter. To then convert to a 7-way you'd just need the part # 37185 if all you need is trailer lighting.
If you have trailer brakes as well you'd instead of the 37185 need the part # ETBC7 and a brake controller like our very popular P2 part # 90885 and you'd be set. view full answer...
If there is power going into your multiplexer but none coming out then yes it would be damaged and in need of replacing like with the part # RVS-501N if you need a 3 channel option. view full answer...
Hey Scott, since we know your 2012 Jayco Eagle Super Lite HT 26.5RLS has 12 inch brake assemblies the best solution for a replacement would be the etrailer part # AKEBRK-7-SA which we know fit and work great. These are self adjusting too which means you would not have to worry about ever having to manually adjust them. view full answer...
Yes, there is! We actually have two that will fit your 2024 Volvo XC90. The difference between the two is one is designed for only using accessories like bike racks and cargo carriers. The other one includes a ball mount and wiring kit so you can tow a trailer in addition to using accessories. I have listed both options below and attached a couple of installation videos to help you get them set up.
For Towing - Stealth Hitches Hidden Trailer Hitch Receiver w/ Towing Kit item # SH27FRT
For... view full answer...
Since you are just planning on using the hitch for a bike rack, I strongly recommend the Stealth Hitches Hidden Rack Receiver item # 391KIATELL20. This hitch is custom fit and bolts to your Kia with included hardware. This hitch has a 600 lbs tongue weight so you will have plenty of capacity for a bike rack or cargo carrier.
The reason this is the best hitch for a bike rack is because the receiver is removable and the rest of the hitch is completely concealed. When you're not transporting... view full answer...
I checked with Roadmaster and since your 2018 Jayco Redhawk SE 22c was built on a 4500 Chevy chassis you will need the RM Reflex Steering Stabilizer w Mount Brackets for Class C M item # RM-RBK23-RSSC. This fits the 4500 cutaways.
I have linked an installation video below so you can see how to get it set up. view full answer...
Hey Don, actually you can use either but if was me I would go with the Voyager adapter part # VGR64VR since its more of a permanent install and wouldn't require you to have to remember the adapter everytime you plan to tow. view full answer...