I have a solution for you but we don't have any custom fit options for a 1996 International 8100 tractor and the B&W Turnoverball Underbed Gooseneck Trailer Hitch item # BWGNRK1111 is not going to work. It fits a truck frame that is 34-1/4" wide.
The Buyers Products Gooseneck Hitch Plate item # 3373014981 is a universal fit product that can be welded on top of a structural steel bed or bolted to the truck frame. This 13-1/2" x 42" gooseneck hitch has a 2-5/16" hitch ball and two steel... view full answer...
The universal wedge included with 5th Airborne Premium 5th Wheel Air Ride King Pin w/ Sidewinder and Turret item # RP34FR may fit but it is better to use the specific wedge kit for each hitch to eliminate any play with the king pin.
For your B&W Companion 5th Wheel Hitch item # BWRVK3600 you will want the Sidewinder Wedge Kit for B&W, Demco, and Husky Fifth Wheel Trailer Hitches item # RP74FR. view full answer...
The only hitch I have for you is going to be a rear class III hitch # 13580. The # C31083 front hitch is designed for 2018 - 2020 Ford Expedition and 2015 - 2020 Ford F-150 models. I contacted our manufacturers and they also do not make a front hitch for your 1976 International Scout II.
If you wanted to take on the task, you could take the Curt Adjustable Trailer Hitch # C13701 and weld/bolt it on to the front. I don't know how original your Scout is but that is a route you could take.
Whatever... view full answer...
The Buyers Products Flatbed/Flatbed Dump Hitch Plate Bumper part # 3371809050 is a universal product which can be made to fit many different applications. I wouldn't be able to inform on specific applications such as this but so long as you have the 34" frame spacing (outside to outside) which is standard then it should be able to be made compatible. If not, a better option would be the Buyers Products Fabricators Hitch Plate part # 3371809042 which is not limited to the above frame spacing... view full answer...
I'm happy to help you figure out if the Dexstar Conventional Steel Wheel w/ +0.5" Offset - 16" x 6" Rim - 8 on 6-1/2 - Black # AM20766 will fit on your trailer.
In order to determine if it fits you simply need to know your trailer hub's bolt pattern. Since this wheel has an 8 on 6-1/2" bolt pattern, if you measure from the center of one bolt hole to the center of its opposite bolt and get 6-1/2" then this wheel will fit your trailer!
I have added a link to a video review as well as... view full answer...
We do have some universal fit hitches that you'd be able to use on your 1999 International Trucks 3800 bus, but you would need to confirm the type of frame and the width of the frame. The Curt # 13703 can fit on box frame, C-channel frame, or I-beam frames between 22" and 72" wide and can be either bolted on or welded to the frame. I really like the durability of the powder coat that Curt uses on their hitches, which helps make sure that it stands up to the elements and resists corrosion.... view full answer...
We can get your International 4900 set up with a 7-way and brake controller, and to do that you'll need to start with a 4-way, which will activate your trailer's lighting functions, and you'll then plug that into the 7-way. For the universal harnesses and brake controller, use the following:
- Tail Light Converter with 4-Pole Flat Trailer Connector # C59236
- Universal Installation Kit for Trailer Brake Controller # ETBC7
- Prodigy P3 Trailer Brake Controller # 90195
The # ETBC7 has the... view full answer...
You will need the Roadmaster Front Anti-Sway Bar # RM-1179-121 and Rear Anti-Sway Bar # RM-1179-110 for your 2019 Nexus Wraith 33w Super C since it rides on a 2018 International MV607 chassis. The Front # RM67MR and Rear # RM77MR sway bars you found fit the newer 2019 International MV chassis.
Roadmaster does not currently offer a steering stabilizer for your chassis. And as I see Safe-T-Plus does not have as stabilizer either I believe you will be stuck with the factory unit. view full answer...
OnSpot Chains are a special tire chain system for snowy weather (pictured below). Basically the sway bar is going to need the same space for mounting as the OnSpot chains so they can't be used together with the # RM-1179-110-00 you were looking at.
If you have OnSpot chains on your 2020 International Trucks DuraStar then you'll want the Roadmaster Rear Anti-Sway Bar # RM-1179-110.
If you don't have OnSpot chains on your 2020 International Trucks DuraStar then you'll want the Roadmaster... view full answer...
For a 2021 Nexus Ghost on a 2020 International MV air ride chassis you would need the Roadmaster Front Anti-Sway Bar # RM-1179-121 for the front and the Roadmaster Rear Anti-Sway Bar # RM-1179-110.
If you do not have "Onspot Chains" then you'll need to use the Roadmaster Rear Anti-Sway Bar and Axle Plate # RM-1179-110-00 instead. This kit comes with an axle plate for mounting. view full answer...
We do have a variety of hitch plates available that you can install on your 2021 International MV607 Crew Cab. Some of them are custom fits that require fabrication, like the 5/8" x 34-1/2" x 22-1/2" # 3371809043, and others are like the Hitch Plate Bumper # 3371809055.
I'm not 100% sure what you'll be needing since we don't have any custom fit options for your truck but I'm linking our selection for you to filter through so you can find the one you believe will fit your vehicle best. view full answer...
The Hayes Air Actuated Brake Control, # HA100400C, will work on your 2002 International 4400 truck as long as you have an air line connection and trailer connector to plug your trailer up to your truck.
You will need to wire the three wires coming out of the Warner controller as followed: BLACK is to 12-volt power, the RED will wire to the your brake light switch on your brake pedal, and the BLUE wire will wire into the 7-way connector to run the brake signal to the trailer when it is... view full answer...
We have confirmed with Roadmaster that the sway bar part # RM-1179-124 that you referenced does fit the 2016 International Trucks Terrastar chassis like what you have on your Nexus Phantom 33SC. view full answer...
While there isn't a custom fit trailer hitch for your 2008 International 4400 ambulance, there may be an option for you with a weld-on hitch. It just depends on the width of your frame, and one with the correct drop.
- 7" Tall Brackets, 44" Wide Crosstube: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07
- 16" Tall Brackets, 44" Wide Crosstube: Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16
I have added a link below to the install instructions... view full answer...
I don't have any specs to determine fit of the Buyers Products Fabricators Hitch Plate like part # 3371809040 on any one vehicle but you can make an educated guess using the overall dimensions of the plate which for the above are 34-5/8" wide x 15-5/8" tall. You'll need to weld the hitch in place so modifications are to be expected. view full answer...
For your application I recommend going with the Thule track mount system as that has the longest bars at 79" which will fit with a current foot pack. You will need tracks and a whole roof rack package. I will have these separated out so that you can choose the best track length for your application. Please keep in mind that the weight capacity of the roof is typically the limiting factor when it comes to load capacity so you'll want to see if you can find out what that is for your 4300... view full answer...
For a 2019 International MV Series chassis the Roadmaster Front Anti-Sway Bar # RM-1179-121 would be the correct fit if it was a cutaway/van style. If you had a Class A Motorhome with this style chassis then you would need part # RM67MR.
For the rear on the cutaway you would need the Roadmaster Rear Anti-Sway Bar # RM-1179-110, and for the Class A style part # RM77MR view full answer...
For the bench seats in your 1982 International Harvester, I recommend taking a look at the Aries Automotive Seat Defender Bench Seat Protector part # AA3147B for black or part # AA3147G for gray. The seat covers measure 66" wide x 55-1/2" tall which is the closest fit seat cover we have for your bench seats. Unfortunately, we do not have a custom fit option for you so this will be your best option. view full answer...
I have another option for you, but the # TIRCV515 you were looking at is only confirmed to fit select International Trucks CV Series trucks and will not fit your MV series truck.
Instead for your 2020 International Trucks MV Series you will need the Timbren Rear Suspension Enhancement System # TRED001 as long as your truck does not have air suspension, which I confirmed with my contact at Timbren. If your truck has air suspension then there is not a suspension enhancement option available. view full answer...
The adjustment holes on the Super Titan Forged Pintle Hook Plate part # RP38186 are 17/32" diameter so they will accept and are designed to be used with 1/2" bolts. It should not matter what brand pintle hook is used as the hole size and spacing are both industry standards. view full answer...
Go To Results