For your 2018 Infiniti Q50 that has a Class I trailer hitch installed like the Draw Tite part # 24931 I really like the Hollywood Racks Destination Bike Rack for 2 Bikes, part # HLY94FR
This is a platform bike rack that only touches the bike at the tires and only weighs 20 lbs! The biggest drawback to platform bike racks has always been the weight of them, but with this rack you get the best of both worlds. The preferred attachment style with the lighter weight. view full answer...
When it comes to installing a trailer hitch on your 2016 Infiniti Q50 the main difference between the sport model and non sport model is how the trailer mounts underneath the vehicle.
The Draw-Tite Sportframe Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4 inch # 24931 works on both sport and non sport models because of how the hitch was made, and how it bolts up to the frame of your vehicle.
The trailer hitch has a concealed cross tube which will give your vehicle a sleeker look... view full answer...
Since there isn't a way to adapt the Hollywood Rack RV Rider part # HLY64FR to fit a 1-1/4 inch hitch you'd have to go to a new bike rack. The only e-bike rack we offer that was designed to fit the smaller hitch size is the Thule EasyFold XT part # TH903202 which is a really easy to load and use bike rack as well as it comes with a ramp that pulls out from the assembly. It also can tilt down with bikes loaded for rear cargo area access as well. This isn't rated for motorhomes, but will... view full answer...
It does; I verified directly with the manufacturer for you that the Draw-Tite hitch does fit your 2019 Infiniti Q50 Sport, with the correct part number being the following:
- Draw-Tite Sportframe Trailer Hitch Receiver # 24931 view full answer...
The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11493 is the only hitch available for the 2015 Infiniti Q60, but it will only work if your Q60 is a coupe. The Kuat Beta Bike Rack for 2 Bikes - 1-1/4" Trailer Hitches - Tilting # B202-114 would fit great on this hitch.
If you don't have a coupe, then I do have a solution for you to be able to carry bikes.
I recommend the Thule Gateway Pro 2-Bike Rack, part # TH88VR. This is a trunk mount rack that has a 70 lb weight capacity... view full answer...
Reese and Draw-Tite are both owned by parent company Horizon Global. Reese trailer hitches have been rebranded under the Draw-Tite name.
The best Draw-Tite Hitch for your 2014 Infinity Q50 Hybrid is going to be item # 24931. This hitch is custom fit and bolts directly to your Infinity with included hardware.
This hitch has a 1-1/4" receiver and the crossbar is concealed behind your rear bumper. view full answer...
The 2019 Infiniti Q50 and the VW Taos would use completely different hitches, so unfortunately the hitch from your Q50 couldn't be repurposed for your Taos.
For the Taos, I'd recommend the Draw-Tite # DT79GR. If you'll be towing with the hitch, you'll also need a trailer wiring harness like # C59236, a ball mount like # 2753 and a # 40038 for a 1-7/8 inch or # 63845 for a 2 inch trailer ball. view full answer...
The difference is the color of the pin and clips of the two kits. The Patriot Adjustable Hitch Adapter part # PH67SR has black pin and clips whereas the # PH54FR has red ones. view full answer...
For your 2014 Infiniti Q50 there are only 1-1/4 inch hitches available. 2 inch hitches are generally only seen on vehicles with larger capacities like trucks and SUVs.
For your vehicle you would want the part # 24931 for a hitch and then a compatible bike rack with that hitch size.
The most popular bike rack we carry that has been confirmed to fit this vehicle is the Thule Camber 2 part # TH9058. We asked our demo and install guys to name their favorite, most easy-to-use bike racks and... view full answer...
Both the Curt Trailer Hitch Receiver # C11407 and Draw-Tite Sportframe Trailer Hitch Receiver # 24931 that are confirmed to fit your 2021 Infiniti Q50 are very similar both in how they attach to the overall construction.
We have been able to install both these receivers on a 2018 Infiniti Q50 and we were able to take measurements of the receivers on the vehicle. Both receivers had a hitch pin center hole measurement of 6" from the center of the pin hole to the rear of the bumper. The... view full answer...
We have determined that the Draw Tite hitch part # 24931 is a fit for the 2018 Infiniti Q50 although Draw Tite has not made the same determination. Reason being we know the Curt hitch # C11407 does carry over from 2017 to 2018 and this is basically the exact same design so there's no reason it wouldn't. view full answer...
For a reasonably priced trunk rack that is confirmed as a fit for your 2017 Infiniti Q50 the Thule Passage part # TH88VR is going to be your best option. It is loaded with features and has wide, thick pads to protect the finish of your vehicle. The only nicer option I would recommend instead would be the Thule OutWay part # TH45JV which is easier to install with its 2 rubber coated cables.
If you plan on carrying any women's or alternative framed bikes without horizontal top tubes you... view full answer...
Yes, I checked with Curt and the Curt Hitch part # C11407 that you referenced has been confirmed to fit your 2014 Infiniti Q50 so it would work well for you.
You could also use a bike rack with this hitch as well. The most popular bike rack we carry that would be confirmed to fit this vehicle would be the Swagman XTC-2 part # S64670. This rack has a ton of positive reviews from our customers who have bought it so I would recommend it for you. I attached a review video for you to check... view full answer...
For your 2018 Infinity Q50, I recommend the Thule Gateway Pro 2 Bike Rack - Trunk Mount - Adjustable Arms # TH88VR over the Passage # TH910XT. This is due to the integrated cable lock of the Gateway Pro as well as the arms being slightly closer together for smaller frame bikes as well as more space between the bikes. I recommend getting the Thule Passive Security Strap for Trunk Mounted Bike Carriers # TH533 to secure the rack to your vehicle. view full answer...
I reached out to my contact at Draw-Tite who said that they haven't had any reports of fit issues with the 2015 Infiniti Q50S and the Draw-Tite Sportframe Trailer Hitch Receiver # 24931. We have learned that the Curt # C11407 isn't confirmed to fit. Since the Draw-Tite is basically the same design I kind of doubt it will fit either.
Aside from that what you'll need to do is check out the dimensional diagrams I am attaching to this page and compare them with your Q50S to see if it matches... view full answer...
I checked with Draw-Tite and they do show the Draw-Tite Sportframe Trailer Hitch Receiver part # 24931 as a fit for a 2018 Infiniti Q50 all models which includes the Sport. The hitch is a bolt-on fit that will be great for towing or hitch mounted accessories such as bike racks and cargo carriers. view full answer...
Right now the only hitch that is confirmed to fit the 2014 Infiniti Q50 is the Curt Hitch part # C11407 that I recommended for Cindy so I would recommend this hitch for you as well.
The Swagman XTC-2 # # S64670, offers a few things that have been improved over the Swagman XC-2, part # S64650.
Beyond the aesthetics, the XTC-2 offers re-designed and improved wheel cradles that are stronger and position the bikes higher up to provide more ground clearance. The wheels hoops on the XTC-2... view full answer...
Yes, the Inno Kayak Lifter Load Assist part # INA453 will work with all of the Yakima crossbars which includes the Yakima JetStream Crossbars like part # Y00425, the Yakima CoreBar Crossbars like part # Y00423, and the Yakima Round Crossbars like part # Y00408. view full answer...
The # AT91367 we offer is the same exact circuit board as the Atwood 91349. The # AT91367 is the correct replacement. I have definitively confirmed this by speaking with my Dometic (formerly Atwood) representative. view full answer...