Expert Answers about Hyundai Tucson

• Does Coupler Latch Need Adjustment to Use Euro-Style Ball Mount Like # C45592
• By 'clasp', I assume you're speaking about the latching mechanism on the trailer coupler. If your current coupler is compatible with a 2 inch trailer ball, it will operate just fine with the Curt Euro Style Ball, part # C45592. As long as the ball diameter is compatible with the coupler, you shouldn't need to adjust anything.
  view full answer...


• Should I Abide By the Vehicle's Maximum Tongue Weight or the Maximum Tongue Weight of the Hitch?
• When considering the maximum tongue weight capacity rating of the vehicle or the hitch, you should always go with whatever is the lowest of the two. For example, if you are considering the Draw-Tite Hitch - 2" # 75836 on your 2019 Hyundai Tucson Ultimate, the 100-pound capacity is the lowest factor compared to the 525 maximum tongue weight capacity of the # 75836. Putting more weight than the 100-pound maximum can greatly damage your vehicle and is extremely dangerous.
  view full answer...


• Is a Torque Wrench Needed for Curt Hitch on 2020 Hyundai Tucson
• Yes, you will need a torque wrench to install the Curt Trailer Hitch Receiver part # C13240 on a 2020 Hyundai Tucson. That said, you can either rent this for free from most local auto parts stores or you can pick one up from us with your hitch like the 1/2" Drive Torque Wrench part # PTW3001C.
  view full answer...


• Replacement Hardware for Curt Trailer Hitch Receiver that Fits a 2006 Hyundai Tucson
• The Curt trailer hitch receiver, part # 13526, installs with six M10-1.25 X 35 hex tap bolts and six 3/8 inch conical toothed washers. If you're looking for the exact replacement hardware you can use part # RHK and select "Curt" in the drop down and enter "13526" into the model number and you'll receive the exact bolts and washers orignally included with the hitch. It is a confirmed fit for your 2006 Hyundai Tucson. I've linked a video of the hitch being installed onto a 205 Tucson for you.
  view full answer...


• Solution for Waste Water Staying in Sewer Hoses on RV
• What I strongly recommend instead that will fix your problem is the Flush King Reverse Flush Valve for RV Holding Tanks and Sewer Hoses - 3" Diameter # F02-4350 because it is designed for the exact problem you are having. It will flush the hoses so the waste water does not stay the "T" on your photo. It would require you to hook up a hose, Flushing Hose for RV Sewer System # W01-4180 (15 feet) or # W01-4300 (25 feet) but would be the remedy to your issue. I have added a link to a video...
  view full answer...


• Can a FWD 2016 Hyundai Tucson be Towed with a Tow Dolly
• If you look at the owner's manual for your 2016 Hyundai Tucson you will see on page 6-23 it says that it is acceptable to tow the front wheel drive version of with the rear wheels on the ground. You will want to confirm this in your copy of the owner's manual. Since you can tow your Tucson using a tow dolly we do have some options available to you. Part # RM-2050-1 is a basic version that is rated for 4,250 lbs and has the option to use electric brakes. The former dolly has loose wires...
  view full answer...


• What Bolts Should I Use To Install A Draw Tite Class 3 Trailer Hitch
• While grade 8 bolts like you have are recommended to install a class 3 trailer hitch, I do not recommend using the bolts in your picture. For a trailer hitch like the Curt #14001 you were looking at, it uses 1/2" x 13 grade 8 bolts. Hitch manufacturers including Draw-tite and Curt recommend only using manufacturer approved hardware. We can provide a complete hardware kit of all manufacturer approved hardware in part # RHK. Just enter to correct part number from your hitch before adding...
  view full answer...