We have wheel and tires in the size and rating that you need of 5.30-12 Load Range C like the part # AM30820 which is mounted on a 5 lug bolt pattern wheel or the part # AM30790 that is mounted on a 4 bolt wheel. view full answer...
We have a range of RV thermometers and weather station products shown on the linked page that provide temperature display and related information like humidity and forecasts but none of these is specifically intended for attachment to a window. For a cost-effective model that gives you both indoor and outdoor temps as well as a clock you might like the TempMinder Indoor and Outdoor Thermometer with Clock # MRI-122AG. view full answer...
For your 2017 Hyundai Santa Fe Sport, I recommend the Curt Class III Trailer Hitch w/ 2 Inch Receiver, # C13152, and the Draw-Tite Class II Trailer Hitch w/ 1-1/4 Inch Receiver, # 36536, which is confirmed to fit your 2017 Santa Fe Sport.
Unfortunately, this hitch was not designed to be "concealed" once installed on the vehicle. The cross tube will be visible on the underside of the vehicle's bumper. Unfortunately, we do not have a concealed hitch to fit your Santa Fe.
This hitch is a... view full answer...
Suspension enhancement options for the 2017 Hyundai Santa Fe is limited but we do have the Coil SumoSprings Custom Helper Springs, # CSS-1125. These do a great job toward reduction of sag/squat while towing and hauling loads. These are also very easy to install.
Please note the linked product review video below. view full answer...
If your 2017 Hyundai Santa Fe Sport with panoramic glass roof has an otherwise normal (bare) roof with no rails or fixtures you can use the Thule WingBar Evo roof rack made of parts # TH711400, # TH710501 and # TH145059. view full answer...
The Curt hitch part # C13152 that you referenced will also fit your 2016 Hyundai Santa Fe but you will need new install hardware since it is considered one time use. For that you will need part # RHK.
For trailer wiring you would want the part # C56332. If that is what you had on your 14 then it would also fit the 16 model. view full answer...
All available floor and cargo area mats offered for your 2014 Hyundai Santa Fe Sport can be seen on the link provided. Most of these are the carpeted type, but we also offer custom-fit thermoplastic mats from Weather Tech, such as the item you referenced, part # WT40556, which is a black cargo area mat.
You can use the filters in the left-hand margin to narrow the product results to those with the characteristics you prefer. Pricing for these products is indicated on each product page. view full answer...
In the 2019 Hyundai Santa Fe Ultimate without the tow package you can use Curt universal hardwire 4-pole kit # C59236. I confirmed compatibility with my tech contact at Curt. At the present time (March 2019) this is the only hardwire option confirmed for the vehicle.
Please refer to the linked review and installation videos for more details on operation and installation. view full answer...
If you check out the review I attached you will see the Curt cargo carrier part # C18151 being demoed on a 2014 Hyundai Santa Fe just like yours. It will sit 14 inches off the ground at the back of the carrier. And adds 38-1/2 inches to the back of the vehicle.
It would work well for you and have clearance to fold up but you would need to be careful in steep elevation changes so that it doesn't drag. view full answer...
Yes, take a look at Fulton Single Axle Trailer Fender with Top and Side Steps # F008593. The fender is 9 inches wide, 12 inches tall and 40 inches long. Each fender would attach to the trailer using the # PF1135-BKT-2 brackets, which includes two brackets. For two fenders, you'd need two sets of brackets.
I have included a video review of this fender for you to check out. view full answer...
You can install the Curt hitch part # C13152 on a vehicle like your 2017 Hyundai Santa Fe without needing a jack or lift to raise the vehicle any higher. The vehicle has enough ground clearance to not require the added lift. We use a lift in our install videos as it makes it much easier to show the install process which is also the case in the install instructions link which I attached to this page. view full answer...
The best E-bike rack for your 2016 Hyundai Santa Fe is the Thule EasyFold XT part # TH903202 because of how well it secures the bikes, how easy it can attach to the typically unusual frame styles of E-bikes, and because it's much easier to load due to the included ramp.
You'll want a trailer hitch installed on your Santa Fe first. For that the hitch I recommend is the Draw Tite part # 75776 which has plenty of towing capacity and won't require a stabilizer strap like the Curt hitches... view full answer...
We carry beam trailer axles up to the 3500-lb rating and with the dimensions most commonly used on recreational trailers. Dexter idler axle kit # 35545I-EZ-89, for example, is a 3500-lb-rated EZ-Lube axle with 74-inch spring centers and an 89-inch hub face dimension. Axle diameter is 2-3/8-inches and spindle size is indeed 1-1/16-inch.
The same axle with spindles but without hubs is part # T3584F-EZ-8974.
The linked article on trailer suspensions includes a table of common axle dimensions... view full answer...
With Wheel Lock Set for 1/2" Wheel Bolts # RG01-150 you get 2 locks and 1 key. There isn't an option for multiple wheel locks that use the same key for this product. view full answer...
Since your 2010 Hyundai Santa Fe has a factory 4-Way trailer wiring connector, it will be pretty simple to install a working 4-Way and 7-Way combination connector. We offer a kit, # ETBC7, that has this style of connector. You will need to hardwire the remaining wires that will supply power for trailer brakes, 12 volt power for trailer lighting or maintaining trailer battery charge, and reverse light signal.
We have detailed instructions, see link, that show how to connect these wires,... view full answer...
We have exactly what you need with the Curt T-Connector # CU94FR. This plugs right into the connector for the factory trailer tow package on your 2020 Hyundai Santa Fe and provides you with a 4-Way flat connector for basic trailer wiring. I have attached an installation video of this kit on a '19 Santa Fe that you can reference.
If you don't already have a trailer hitch, then I recommend the Draw-Tite # 75908 because it has a mounting bracket welded onto the crosstube which pairs nicely... view full answer...
I do have a possible solution for you, but unfortunately the 2017 and 2018 Hyundai Santa Fe models were designed in a way that does not allow for any kind of suspension enhancement or air bags. If you're looking to reduce sag while towing, I recommend using a weight distribution hitch.
In order to choose the correct weight distribution hitch you will need to know the loaded tongue weight of your trailer. This also includes the weight of anything behind the rear axle in your tow vehicle.... view full answer...
I have a couple options for you to consider for hauling a Cargo Carrier # CC-100 higher on your 2018 Hyundai Santa Fe.
First the Roadmaster High-Low Adapter # RM-048-6 can be used to raise your receiver height 6". This adapter will be limited to only 200lbs of tongue weight as it is designed for flat towing where there is generally no tongue weight. Since you would be using it with a cargo carrier its maximum rating of 400lbs drops 50%.
Next is the Replacement Shank for Gen-Y Adjustable... view full answer...
There are some roof racks that do use black bars but if your 2013 Hyundai Santa Fe. If you do not have side rails then Rhino-Rack's ROC25 Roof Rack for Naked Roofs with Vortex Aero Crossbars Item # RR92SR are aluminum, black and sleek.
If you have the side rails that run front to back and want black bars then you can go with a Thule system using the following parts:
Thule SquareBars, # TH712200, or Thule black WingBars, # TH711220
Thule Rapid Podium Roof Mounted Foot Pack, # TH460R
Thule... view full answer...
All the hitches offered for your vehicle will interfere with the spare to a small degree, but the spare tire will still fit. I spoke with my contacts at Curt Manufacturing, as well as Cequent Performance Products, who manufacture Draw-Tite brand hitches. I was told that the Draw-Tite # 75471 and the Curt # 13538 are all compatible with 2009 Hyundai Santa Fe models equipped with the spare tire.
Although the hitch will prevent the spare from dropping straight down, the solution is very simple.... view full answer...
Go To Results