First thing you will need is a ball mount. But you need to pick one out that will allow you to tow your trailer level. In order to do that you have to find out which rise/drop you need. You will need to measure from the bottom of the coupler to the ground when it is sitting level and then you will need to measure from the top of the hitch opening to the ground. Whatever the distance is will be the amount of rise/drop you need. With that dimension you will be able to check out the link I... view full answer...
I can see why this might create some confusion, but it's going to be down to the differences in the types of lights that are used in these vehicles. The 2009 Subaru Ascent only uses a single bulb for both functions where as your 2014 Honda Odyssey and the 2012 Chevy Silverado have separated high and low beam functions, so replacing the lights can be done one at a time or all at the same time.
If you check out the front of your 2012 Chevy Silverado 2500 or your 2014 Honda Odyssey you'll... view full answer...
Yes, The Replacement Load Bar Endcap for Thule or Hullavator, Item # 853-2297, will work for your regular Thule Square Load Bars since the Thule Goalpost TH997 came with a Thule square crossbar.
As much as possible, Thule uses common parts and common sizes so that it is easier to find replacement parts for their products.
Contact us if you have other questions. view full answer...
The Draw Tite hitch you have part # 75270 has 7 inches from the center of it's pin hole to the outside of the bumper on your 2017 Honda Odyssey. For a 6 inch rise ball mount that would be perfect for you we have the Curt # C45100 which has 6-1/4 inches of rise and has more than enough length to clear your bumper.
For a 2 inch ball to go with this we have the # 63845. view full answer...
I found your order from back in 2014 for the Curt Class II hitch # C12031 and I am pleased to tell you it will fit just fine on your new 2017 Odyssey.
You will need a new hardware kit since hitch installation hardware is intended for a single use only. We offer part # RHK. All you need to do is enter that part in our search field and press enter. Then once on the page simply enter the hitch part number (C12031) and select the brand Curt from the menu tool provided.
We will put together... view full answer...
It sounds like you might be trying to re-install a trailer hitch on your 2012 Honda Odyssey; I have a solution for you to get a replacement hardware kit but we don't have individual bolts available. You can get a replacement hardware kit for your hitch by using part # RHK and then putting the model number of the hitch you've got in the field where it says "Hitch Item Number". For example, if you have a Draw-Tite # 76025, you'll put that number in that field.
I've linked all of the potential... view full answer...
Hitch # 75270 is indeed a confirmed fit on both the 2002 and 2012 model years of the Honda Odyssey and we can help you with new hardware. Hitch installation hardware cannot be re-used so you don't need to worry about losing it!
Our part # RHK is a replacement hardware kit. Simply enter this part in our search box and press enter. Click on the part displayed and then above the Add to Cart button enter in the hitch number 75270 and select Draw-Tite from the drop-down menu. We will send you... view full answer...
The QM3 Kit, part # TH04997 will adjust the current hardware to fit over most factory and aftermarket bars. I contacted Thule and they confirmed that the QM3 kit will fit bars up to 3-5/8 inches wide, giving you plenty of room to mount on most crossbars. view full answer...
We do have the replacement hardware for the Curt # C13068. What you need is the Replacement Hardware Kit for Trailer Hitches # RHK. This kit comes with everything you need to install the hitch on your 2004 Honda Odyssey. The price can be found on the product page.
I included an installation video below for your reference. view full answer...
I was able to find out that your Shoreland'r has 3,500 lb drop axles so for a bearing kit that includes new seals as well you'd want the # BK2-100 which comes with everything. view full answer...
Yes, we do offer replacement hardware for the Curt Trailer Hitch Receiver part # C13068 which is a fit for a 1999 - 2017 Honda Odyssey, you'd simply need to order the Replacement Hitch Hardware Kit part # RHK. view full answer...
The Curt Trailer Hitch Receiver # C12031 for 1999 thru 2017 Honda Odyssey models use M12-1.25 x 35mm bolts with 1/2 inch conical toothed washer for the weldnuts in the frame. It also will use one 7/16-14 x 1-1/2 inch carriage bolt with a square hole spacer and a 7/16-14 flange nut. I've attached the installation instructions to assist further.
If you want the exact hardware and fish wire you can use kit # RHK. You may also want the nylon tube brush # 814092 and some spray lubricant... view full answer...
We do have trailer hitch hardware for your Curt # C13068 trailer hitch receiver. The Replacement Hardware Kit for Trailer Hitches # RHK is what you need. You will need to enter the hitch item number you listed and then select Curt from the manufacturer drop box. We will create a kit for you of all the hardware needed.
I've attached a video of the installation to further assist. view full answer...
In order to get replacement hardware for a trailer hitch you can use the Replacement Hardware Kit for Trailer Hitches part # RHK. In order to make sure you get the correct kit for a 2010 Honda Odyssey with U-Hual 1-1/4" you will enter "Curt" in the manufacturer drop down and enter "C12031" for hitch item number. U-Hual uses Curt hitches. view full answer...
Since your axle capacity is unknown - and since it is also rust damaged - you're probably on the right track in thinking of replacing it. We offer both axle beams by themselves and in kits that also include hubs, bearings, races etc. Please see the linked page.
We also offer axle-less suspension systems from Timbren, such as their 3500-lb-rated # ASR3500S05. These unique systems mount directly to your trailer frame - no axle needed - and they can save you lots of install time, potentially... view full answer...
I wish I could help but Yakima does not offer any replacement lid supports for the Yakima SpaceBooster Cargo Box (1998-2003) anymore. I would only be able to recommend a full replacement like the Yakima SkyBox 12 Rooftop Cargo Box part # Y07334. The other option you have would be to try and retro fit a lid support from another cargo box like the Replacement Lid Support for Yakima Cargo Boxes part # 8880683 but we don't really have any advice for this. view full answer...
There is replacement hardware for the Curt Trailer Hitch Receiver # C13370 for your Honda Odyssey, but they don't sell individual pieces so you'll need to get the whole hardware kit with the following:
- Replacement Hardware Kit for Trailer Hitches # RHK
All you need to do is click # RHK, enter "C13370" in the "Hitch Item Number" box, select "Curt" from the “Manufacturer” drop-down menu, hit "Add to Cart" and you're set. view full answer...
The correct replacement for your missing 2802 key would be part # THKEYN2802 from Thule. You can order the replacement key by using the provided link. view full answer...
From the pictures you provided, you have a UFP DB-42 disc brake set up on your 2008 Trail-Rite. This isn't something we carry, but it looks like these systems use the # L68149 inner bearing and the # L44649 bearing, so you do have a common spindle for a 3,500 pound axle.
With that said, we do have the Kodiak Disc Brake Kit # K2HR35DS that looks like it would be a perfect replacement. This is rated for 3,500 pound axles and will use these same bearings, though not included so you will need... view full answer...
Go To Results