Expert Answers about Holiday Rambler

• Needing EZ Lube Boat Trailer Hub With 1.25 Inch ID Grease Seal and L44649 Bearings
• We don't offer a hub kit that meets all the parameters you mentioned, we have a couple of options that would work. Your boat trailer used an oddball hub/spindle combination, which was used by Ranger and a couple of other boat manufacturers with the idea being that you could only get the replacement parts from them. We do have an option, but you'd need to purchase the correct EZ Lube grease cover separately. The CE Smith Hub Assembly, part #CE13311 is compatible with 8 to 12 inch wheels....
  view full answer...


• Are Any Trailer Tires Made in the USA
• Currently Goodyear is one of the few trailer tire manufacturer that makes tires in the USA and the only one that we carry. Unfortunately they do not currently offer a tire size of 235/80-16.
  view full answer...


• Which SuperWinch 35 ATV Winch Comes with a Synthetic Rope Instead of a Wire Cable
• The Superwinch Terra Series ATV Winch - Synthetic Rope - Hawse Fairlead - 3,500 lbs # SW1135230 is the same winch as the # SW1135220 you were looking at, only with a synthetic rope like you're wanting.
  view full answer...


• Replacement Shroud for 2002 Keystone Cougar 5th Wheel Air Conditioner
• We may have an AC shroud that will work for your 2002 Keystone Cougar 5th wheel trailer. If you happen to know the make and model it will make narrowing down a compatible cover easier, but we can use the dimensions you gave. The cover you referenced Replacement Cover for Advent Air RV Air Conditioners # PXXMCOVER has overall dimensions of 30-5/8" long x 25-3/4" wide x 10-1/2" tall, so based on the dimensions you gave me I don't think it's sized correctly for your AC unit. The MaxxAir...
  view full answer...


• Which Adco Tyvek Motorhome Cover Fits 2006 Gulf Stream Tourmaster
• Yes, the Adco Olefin All-Climate + Wind RV Cover # AD24ZR that you referenced will fit perfectly on your 2006 Gulf Stream Tourmaster based on the dimensions you listed plus the ladder. The size of your RV is perfect for the length range this cover fits and since this cover provides the best protection from the elements it's the best option in terms of protect as well! It's also one of the easier covers to install and has access panels if you ever needed to get into the RV.
  view full answer...


• Is there a Brake Controller Harness for a Tekonsha Voyager and a 2010 Toyota Tundra
• There is an adapter that you can use that will simplify your installation. You can use part # 3040-P and just cut off the black connector. You will color match the cut wires from the harness to the wires on the back of the controller. Once you have these wires spliced, the controller will plug right into the Tundra. The brake controller connector should be just above the emergency foot brake pedal on the left. I have added a link to the instructions below that shows a picture of where...
  view full answer...


• Does Westin Nerf Bar for 2005 Dodge Ram 2500 Require Ordering Additional Hardware
• The Westin Nerf Bars part # 23-2310 that you referenced come with all install hardware needed so yes, the part # 23-231PK would be included and would not need to be purchased separately.
  view full answer...


• Replacement Step Pad for Westin Platinum Series Oval Nerf Bars on 2010 Toyota Tundra
• We have just what you need with the # 21-0001 Replacement Step Pad for Westin Platinum Series Oval Nerf Bars. As you can see in the attached photo, it measures 24 inches long and uses 5 clips, which are sold separately as part # 60-0244. To replace all 4 pads on your 2010 Toyota Tundra, you'll need to order a total of 20 clips along with the four replacement pads. I've attached an installation video for you at the bottom of the page as well.
  view full answer...


• Adding Brakes to 1999 Jayco Heritage Glacier with Dexter 2,500 lb Axles
• A Dexter 2,500 lb axle uses hubs that have inner and outer bearings of L44649 like the part # 8-257-5UC3 which has a 5 lug bolt pattern or the # 8-173-16UC3-EZ which has a 4 lug bolt pattern. These both come with bearings and seals as well. For brake assemblies you'd want the part # 23-47 for the left hand side and # 23-48 for the right hand side and you'd be set. I attached a help article link on adding electric brakes to a trailer for you to check out as well that I think you'll find...
  view full answer...


• 5th Wheel Tailgate Options for a 2008 GMC Sierra 2500 for 5th Wheel Trailer Hitch Towing
• We actually have two different fifth wheel tailgates that will work with your 2008 Sierra. If you would prefer the more traditional all-metal construction, the Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design, # VGM-07-100 would be a great option for you. At the higher end of the price spectrum, we offer the plastic composite Stromberg-Carlson 4000 Series, part # VGM-07-4000. The # VG-100 you mentioned is for a Ford truck, and would not work on your GMC. If you would...
  view full answer...


• Do You Carry Power Wheelchair Seat Covers
• The Lawn Tractor Seat Covers from Classic Accessories may work. Part # 052963123142 fits seats with up to a 12 inch backrest. The cover you were looking at, part # 052963123241, fits up to 15 inch backrests. We do not carry purpose fit power wheelchair seat covers.
  view full answer...


• Base Plate Kit for a 2000 Suzuki Grand Vitara that Fits a Roadmaster Falcon 2 or Sterling Tow Bar
• If you are looking for a compatible base plate kit that will fit both the Falcon 2 or Sterling tow bar and your 2000 Suzuki Grand Vitara, you will need Roadmaster Tow Bars, # 1011-1. This base plate kit is what is called the Invisible XL series. The visible portion of the kit can be removed when not towing.
  view full answer...


• Options for Adding Ford OEM Equivalent Puck System to 2014 Ford F-250 Super Duty
• Yes, you can add the Under-Bed Rail and Installation Kit for Reese Elite Series 5th Wheel and Gooseneck Trailer Hitches, # RP30126, along with the optional part number # RP30138 if you want to include the Gooseneck Hitch connection; this will be the relative equivalent of your 2014 Ford F-250 Super Duty being delivered from the factory with OEM puck system installed. (This fits 2011 - 2016 Ford F-250 or F-350 Super Duty Trucks.) This installation will allow you to use any 5th wheel hitch...
  view full answer...


• Does ComeUp DV-9 Off-Road Winch Work with 24V Power
• To operate one of the ComeUp DV-9 Off-Road Winches, like the part # CU856333 that you asked about, you'll need a 12V power supply. It doesn't look like there are any 24V winch options even from other manufacturers. Once you have a 12V power supply you can use the Go Power Eco Solar Charging System # 34273836 to keep the battery topped off for when you need to use the winch.
  view full answer...


• Is There a Custom Cover for the B&W Patriot 18k 5th Wheel Slider Hitch
• I have not heard anything along the lines of a custom cover for the B&W Patriot 5th Wheel Trailer Hitch w/ Slider # BWRVK3270 being manufactured. Currently the Classic Accessories Cover for 5th Wheel Trailer Hitch # CA80116 is the best cover for the B&W Patriot. It will not cover both the hitch head and slider assembly, but it does cover the entire hitch head itself. I have included a picture showing what all this cover will cover on a B&W Patriot Sliding hitch.
  view full answer...


• LED Tow Bar Lighting Kit that Could be Used on Trailer or Flat Towed Vehicle
• Sounds like you are looking for a set of LED magnetic tow lights like the part # TLL21RK that you referenced. This is only way to add temporary lights to a trailer or flat towed vehicle like you mentioned and is LED like you want as well.
  view full answer...


• Availability of 2-1/2 Inch Pipe-Mount Sidewind Jack with 15 Inch Lift and Drill Power Option
• If you want a sidewind jack with a drill power option, you are looking at the Trailer Valet JXC/JXS # TV34FR or # TV64FR. The only problem here is these only have 14" of travel and they are not a pipe mount. These are currently the only sidewind options that will allow you to use a drill to operate them. For a jack that has everything you need except the drill power option, I recommend the Bulldog Round, Pipe-Mount Swivel Jack # BD198250. This jack uses a side frame mount, sidewind, has...
  view full answer...


• Replacement Motor for MaxxFan 07500K
• For your MaxxFan part # MA00-07500K that you referenced the correct replacement motor is the part # MA10-20968 that you referenced. The motor comes with connectors that will attach to the circuit board that controls the motor which is part # MA10A21275K as a replacement.
  view full answer...


• Ladder Rack for 2019 Ram 1500 with 5.7 Bed Length
• Thule TracRac SR sliding ladder racks are awesome but they are made for 8-foot and 6-1/2-foot bed lengths only. We do have ladder racks for your 2019 Ram 1500 with 5.7 bed (and without the RamBox feature) that you can see on the linked page. The one I recommend for its combination of weight capacity, good looks and value is the Erickson # EM07705 which features lightweight corrosion-free aluminum construction and an 800-lb load rating. Please check out the linked video to see more on this...
  view full answer...


• Is a Class III Hitch Available for 2021 Nissan Rogue
• The Draw-Tite Class III hitch, part # DT85MR is indeed now available. The hitch is a confirmed fit for the 2021 Nissan Rogue. If you'll be using the hitch for towing, you'll also need a ball mount like # D-28, a hitch pin like # PC3, a trailer wiring harness like # C44ER and a trailer ball. For a 1-7/8 inch ball, use # 19260 or # 63845 for a 2 inch ball. I've linked to an install video for the hitch, as well as to installation instructions for the hitch and the trailer wiring harness.
  view full answer...