Expert Answers about Highland Ridge

• Replacement Options For An Atwood GCH10A-4E RV Water Heater
• The only non-tankless model that we currently offer is the Dometic RV Water Heater # DMC74FR. This heater is a bit smaller and only comes with a 6 gallon tank so it's a bit less than what you're looking for. The Atwood line has pretty much been phased out by Dometic so I recommend checking with them directly to see if they have a similar Dometic branded 10 gallon unit to replace the GCH10A-4E.
  view full answer...


• Can A Hitch Extender Be Used With A Truck Bed Load Extender
• Hi Carlos, A hitch extender could be used with the Erickson Big Bed Load Extender for 2" Hitches # EM07600, it's just not recommended because you'd be cutting the capacity in half and putting a lot of leverage on the hitch. I recommend throwing in some hitch pin locks # e98880 to help prevent anyone from walking off with your equipment while you're out kayaking.
  view full answer...


• Crossbar Recommendation for Truck with Retrax Tonneau Channels
• For a roof rack/crossbar setup that fits the tonneau cover channels you have on your truck the Rhino Rack Vortex Crossbar Setup part # RRVA180B-RRRLT600 that you referenced is what I would go with if I were you. This gives you a higher quality setup that rivals Thule and Yakima but at a better price. It also helps that it looks like you are from Canada and we can't ship Thule/Yakima to Canada.
  view full answer...


• Most Cost Effective Suspension Enhancement Solution for 2003 Class A Ford F-53 Chassis Motorhome
• The most cost effective suspension enhancement solution for your 2003 Class A motorhome built on a Ford F-53 chassis would be the Air Lift LoadLifter part # AL57140. Air bags work great and this would be solid solution Roberto that wouldn't break the bank at all.
  view full answer...


• Upgraded Equalizer Suspension Solution for 2022 Forest River Salem Hemisphere 356QB
• For your 2022 Forest River Salem Hemisphere I would recommend going with the MORryde AllTrek 4000 cushioned equalizers like the part # MR29DR for if you have a 35 inch wheelbase or the part # MR89DR for if you have a 33 inch wheelbase. The reason I like these is that they have vertical and horizontal cushioning unlike other options that have one or the other. Then for the hardware upgrade it comes down to the length of the shackles you have now as well. If they are 3-1/8 inch you would...
  view full answer...


• Cushioned Equalizer Recommendation for Toy Hauler
• The MORryde Alltrek 4000 kits offer the best cushioning so if you are wanting to improve the ride quality of your 2011 Stellar Eclipse that would be the route I would go with. If the wheelbase is 35 inches between the axles you would want the part # MR29DR or if 33 inch part # MR89DR. These provide horizontal and vertical cushioning unlike the other available options. For a shackle kit then you'd want the part # MR58ZR and you'd be set.
  view full answer...


• Replacing Leaf Springs On A Vintage 1965 Streamline Empress
• Hey Skip good to hear from you again. The # e97SR leaf spring that you mentioned is going to be our best option for replacing the springs on your 1965 Streamline Empress. All of the 2" wide leaf springs that we carry are going to be slipper springs. A 2" wide double eye spring really is a thing of the past so going to a 1-3/4" spring will be the only option if you want new springs. The MORryde wet bolt kit and the equalizer that we discussed are designed to work with a 1-3/4" wide spring,...
  view full answer...


• What Is The Smallest AC Unit For Adding AC System To A Cargo Trailer/Camper
• Hello Tyson. The smallest AC unit we offer is the Advent Air Low Profile RV Air Conditioner and this will be a great option for you. Since this is a smaller trailer you can definitely get away with a 13,500 BTU unit. These AC units require the roof to be between 2-1/2" and 5" thick, so please do keep that in mind during your build. For a complete AC system I recommend the following: - Advent Air Low Profile RV Air Conditioner - 13,500 Btu - White # ADV79FR - Air Distribution Box w/ Built-In...
  view full answer...


• 5.5" Wide x 2" Tall Side Clearance Lights For A Trailer
• Hey Brent, The closest clearance light options we currently offer to 5.5" W x 2" T are the Optronics # MC70AB and # MC70RB, which are 5-3/16" W x 2" T. The distance between the mounting holes from center to center is 4-13/16".
  view full answer...


• Replacement Tarp For Extang Tonneau Cover On A 2018 GMC Sierra 1500 With 6.5' Bed
• Good morning Michael I can definitely point you in the right direction. There are a few different Extang covers that fit the 2018 GMC Sierra 1500 with the 6.5' bed. Generally, we like to get a model number or serial number from the cover which we can cross-reference to narrow down exactly what replacement tarp you will need. If you don't have that we can definitely still try to narrow it down though. I see that you were looking at a replacement tarp for the Extang Trifecta 2.0. Is this...
  view full answer...


• Can Trimax Trailer Door Hasp for Puck Lock Be Installed if Surface Isn't Flat
• Hi Dan; the Trimax Trailer Door Hasp for Puck Lock # TMX28ZR is designed to be installed on a flat surface but you could make it work with your ridge along the side of the door. A small piece of wood, plastic, or other material can be used to fill in any space behind the hasp which would create a flat surface for installation. A lot of installations require creative solutions like this to make parts work on a trailer. This hasp, along with locks like the # TMX63FR, is about as good as it...
  view full answer...


• Availability of Removable Trailer Jack
• The only solution we offer for a removable trailer jack is the ARK part # ARK57FR that you referenced Jerry. The removable feature isn't a super high demand option so there aren't a whole lot of jacks with that feature built in.
  view full answer...


• Are Any Adapters Or Rails Needed For The Demco Autoslide For Ram Puck System # DM69GV
• Hey Lamar, The Demco Autoslide 5th Wheel Hitch w/ Slider # DM69GV has side plates with attachment points that will drop right into your Ram's puck system an without the need of any other kind of adapters or rails. The only thing you might need would be a new capture plate for the hitch head if you have an upgraded pin box (rota-flex, flex-air, Pull-Rite, etc.).
  view full answer...


• Recommended Wheelchair/Scooter Carrier With Ramp For A 2021 Grand Design 5th Wheel
• Hello Craig. I do have a solution for you, but the Flint Hill Goods Wheelchair Carrier # FHG99ZR is not recommended for use behind RVs, campers, or trailers. The ride on the back of a 5th wheel or RV is a lot more rough than on the back of a car or SUV and the carrier simply is not rated for this kind of use. What I recommend using instead is the 32x48 Reese Steel Solo Cargo Carrier # PS10401-10402. This is made for a 2" hitch and is rated for 400 lbs, so more than enough for your 100...
  view full answer...


• Recommended 4 Pin Trailer Wiring Harness for a 2011 Toyota Camry LE
• Larry, for your 2011 Toyota Camry I recommend going with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118482. This wiring harness will easily just plug into your existing wiring harness so there won't be any cutting or splicing, and will provide you with that 4 pin wiring harness you're looking for.
  view full answer...


• Replacement Microwave for a 15" Deep Cutout
• Hey Nils, thanks for reaching out! The High Pointe Built-In Convection Microwave with Air Fryer # HP36ZR you were looking at will be too deep to fit your cutout - even with the 18" depth possibility. Instead, I recommend checking out the Furrion Over the Range RV Convection Microwave # FMCM15SS which has much better depth requirements (15" overall) and can be installed directly above your stove. Attached is a review video for you to check out!
  view full answer...


• Recommended Suspension Enhancement for a 2010 Mercury Grand Marquis
• Not that we would have! Sorry Peter but for a 2010 Mercury Grand Marquis the only help we can offer for suspension upgrades are the Coil SumoSprings Custom Helper Springs for Coil Spring Suspension item # CSS-1145R. These insert in your rear coil springs and keep the suspension from fully moving thus preventing squat. They are easily removable when you're not towing.
  view full answer...


• What are The Best Air Bags For a 2018 Ram 2500 4WD When Driving The Truck Unloaded?
• Unfortunately Louie, none of our air bag helper springs are going to improve the unloaded ride quality on your 2018 Ram 2500 4wd. This is due to the factory suspension being designed to be able to haul heavy loads. When you are carrying loads the Air Lift LoadLifter 5000 Ultimate Air Helper Springs # AL88289 will give you the best ride quality as they have the internal jounce springs which help to absorb large bumps rather than getting the bounce most trucks with air springs will have....
  view full answer...


• Which Roadmaster Comfort Ride System for 2022 Reflection 31MB
• Hey Andy, since the Comfort Ride comes in 5k and 7k options and your will have 6k axles you'd want to go with the slightly higher 7k option part # RM-2460-2570 as it would be best to have a little more suspension capacity than not enough and be overloaded. You'd only be able to install two of the MORryde X-Factor Crossmembers part # MR33WR since the center hanger of the Comfort Ride doesn't allow a middle one. The two will make a big difference though.
  view full answer...


• Steel Thickness of the Redline Light Guard
• The Light Guard # LG440NP you're looking at John, is .15" thick.
  view full answer...