Yes, Stealth Hitches Hidden Rack Receiver # SH67FR will fit both the Volvo V90 and the V90 Cross-Country. The Cross Country adds a lifted suspension and standard all-wheel drive for improved capability in inclement weather however, both are the same platform.
If you'll be towing with this hitch and not just for carry of bike rack or cargo carrier, you will need the ball mount assembly included with the # SH36FR wiring package, as the ball mount is a proprietary assembly that nobody else... view full answer...
According to my research, the Marshall HP424 does have a Type 1 connection (which connects to your propane tank) and a 1/4" Male NPT connection (which connects to a dual-stage regulator). So the hose you mentioned will work as a replacement, and there are a number of different lengths if you were in need of one.
- 12 Inches: MB Sturgis Propane Hose Assembly - RV Type 1 w/ Back Check x 1/4" MPT # 100473-12
- 15 Inches: MB Sturgis Propane Hose Assembly - RV Type 1 w/ Back Check x 1/4" MPT... view full answer...
There are no 24 volt A-frame trailer jacks, they do require a 12-volt power source. So what you can do is use a standard electric A-frame jack such as the Electric Jack with Footplate # EJ-3520-WBX with a battery box such as the Tow-Rax Battery Box # TWSP12B.
Otherwise, you would need to use a standard hand-crank jack such as the Ultimate Trailer Jack - A-Frame # 322-RDJ-2K.
I have added links below to video reviews as well as a link to our entire selection of A-frame jacks for you to... view full answer...
The correct Yakima flush mounted roof rack (that does not extend past the roof line) for your 2021 BMW X7 is the following part number:
- Yakima TimberLine FX Roof Rack for Raised Side Rails - JetStream Aero Crossbar # Y87UV
To lock the rack to your BMW to add security, use Lock Cores # Y07204. view full answer...
The B&W # BWRVK3300 Companion 5th wheel hitch for the Ford factory tow/prep package would indeed be compatible with a Lippert Turning Point rotating pin box. You'll also need a # SWW-06 wedge to prevent the king pin from rotating in the hitch jaws.
The Turning Point includes a 'universal' wedge from what I understand but according to our customers, the # SWW-06 wedge works much better. The custom wedge will make it easier to hitch up and unhitch, and it'll do a better job of holding the... view full answer...
We have an option for you, though there isn't a way to get matching keys for a Master Lock # 2848DAT trailer hitch and coupler lock set as they don't have a Keyed Alike option for a second set. What you can do in order to use the same key for multiple trailer hitch locks and coupler locks is use the etrailer locks, and select the "Keyed Alike" option from the drop-down on their product pages.
This will get you all the locks keyed the same so you only have to keep track of a single key.... view full answer...
There is one option which may work for you to turn your fixed cargo carrier into a folding cargo carrier:
- Folding Basket Adapter for 2" Trailer Hitch Mounted Cargo Carriers # 52015
This adapter is designed to work with a Surco carrier, though we also know it will work with the 20 x 59 Curt Cargo Carrier for 2" Hitches # C18150.
It is possible it can work with other cargo carriers for 2" hitches, but we can't guarantee it. I have added a photo for you which shows some dimensions which... view full answer...
We have exactly what you need, which is an adapter that will allow you to connect your trailer's 7-round with your truck that has a 7-blade.
- Pollak Trailer Connector Adapter - 7-Blade Plug to 7-Pole Round Pin # PK12728
All you'll do is plug this in between your trailer's 7-round and your truck's 7-blade and you're all set! view full answer...
Yes the Furrion Vision S Wireless RV Observation Camera System w/ Side Marker Light Cameras # FCE48TASL-05 that you referenced would easily fit on your toy hauler that has an awning. The cameras have such a small footprint on the vehicle they install on that it would be very easy for it to fit around any awning setup. view full answer...
I have a possible solution for you.
It looks like neither your Curt Class III, part # C13205, nor your vehicle are able to support that kind of tongue weight. Your best bet is to use a motorcycle trailer which you can find online.
For most of these, you will need some wiring attached to your 2020 Nissan Murano to power the lights. I recommend the Curt T-Connector, part # C56267. It includes a tail light converter to ensure that your vehicle's wiring matches the one from your motorcycle... view full answer...
For the Saris Freedom, part # SA4412B, the distance from the hitch pin hole to the nearest cradle is 13". However, there is still a way to make this rack work for you.
Even though the 2"-recessed hitch and the 13" clearance for the rack only gives you 11" to work with (3" short of your handle bar length), you can make up that distance using a hitch extender.
I recommend the Brophy Hitch Extender For 2" Trailer Hitch Receiver 7", part # HE06. It will give you an additional 7" of extension... view full answer...
The Roadmaster # RM-035-1 D-ring adapters are indeed compatible with a Roadmaster Nighthawk tow bar. However, because you aren't using traditional base plates, you might have difficulty finding a good spot to attach the safety cables. In this situation, Roadmaster recommends using extensions like # RM-910648-20. You'd want to wrap the extension around the frame members just behind the bumper then attach to the safety cables.
If you decide to use the tow bar for a different vehicle,... view full answer...
The correct Curt Custom Base Plate Kit for a 2011 Jeep Wrangler Rubicon is part # C33FR, not part # C38FR which is for other models with the standard factory bumper. view full answer...
After speaking to the manufacturer they have confirmed the fit of part # AL35FJ on your 2020 Ford F-350 Tremor. I do suggest picking up part # AL74000EZ in conjunction with the air bags. The compressor makes lift easy and you can set the bags to a certain psi or change it on the fly with varying loads. The compressor is a straight forward install and will be worth it in the long run. view full answer...
The B&W Companion Slider Base # BWRVB3405 will fit your 2017 Ram 2500 as long as you have the B&W Turnoverball Underbed Gooseneck Trailer Hitch # BWGNRK1384. This gooseneck hitch is compatible for both the 6-1/2' and 8' bed lengths. view full answer...
The Yakima TopWater Rooftop Fishing Rod Carrier - Locking - 8 Fishing Poles # Y04088 is 102" long x 18" wide x 9" tall and will fit crossbar spreads from 27 inches to 81 inches. The Rack and Roll Trailer # Y08106 crossbar spread is between a minimum of 4 inches and a maximum of 48 inches so the TopWater Fishing Rod Carrier will work well. view full answer...
To order the correct Solera replacement arm size, simply measure the length of the wall-mount extrusion from top to bottom. I've pointed this out using the photo you sent in as an example.
Short styles will measure 61-1/2" and use part # LC351829 (pair)
Pitched styles will measure 66-1/8" and use part # LC266169 (single arm) or # LC351825 (pair)
Flat styles will measure 69" and use part # LC281154 (single arm) or # LC434727 (pair)
All replacement arms can be used on both power and manual... view full answer...
So Roadmaster has a shock kit designed for travel trailers with tandem 3,500 lb axles like what you have on your 2018 Grand Design Imagine 2800BH with the # RM-2450 but they don't have a version that includes slipper springs and an equalizer like they do with the higher capacity setups.
So what you could use is the new leaf spring part # e54SR with the equalizer kit part # AP233 if you were in need of replacing all of the components. view full answer...
It looks like you're looking for a bed mat and tailgate liner for your 2021 Ford Ranger. As you said, the WeatherTech TechLiner Custom Truck Bed Mat, part # WT93RJ, is a confirmed fit.
As for the tailgate liner, the one that you referenced, part # WT3tg02, is for the 2011-2014 Ford F-150s. The proper one for your Ranger is part # WT87QJ. It's the same design, but custom-fitted for your Ranger. view full answer...
We do offer the Bestop Supertop you are asking about that fits your 2011 Toyota Tacoma with a 5 foot bed. The correct part is the following:
- Bestop Supertop for Truck Collapsible Bed Cover # B76308
This top is easy to install by clamping to your bed rails and is a fantastic camper shell/tonneau cover hybrid that gives you the space of a camper shell but folds up like a tonneau for easy access to your Tacoma's full truck bed. I have added a link below to the installation instructions... view full answer...
Go To Results