The NXXX keys are unique to Thule-made cargo boxes. It does appear that Thule has made cargo boxes for GM so replacement key # THKEYN126 is the correct replacement.
One tip I can offer is that sometimes the new keys won't fully seat all the way in the older locks. If this happens you can tap on the key with a mallet to get it to seat all the way so that it will turn. view full answer...
I reached out to a representative of Thule who said the bars needed for your 2004 GMC Yukon XL would be the 69 inch Thule ProBar Evo Crossbars # TH713600 along with Thule Foot Pack 450R in order for you to have the space to carry a pair of Thule Hullavator Pro Kayak Carriers # TH898.
They did say that Thule does not recommend using a pair of Hullavators due to weight capacity concerns and that the warranty would be voided by using a pair of Hullavators.
Due to this you may want to forego... view full answer...
The Titan Chain Diagonal Alloy Cable Snow Tire Chains - Light Truck - 1 Pair # TC751DC are a confirmed fit for your 285/45-22 tires. They are Class S chains that will only require an internal clearance between the inner sidewall and wheel well of 0.59 inch or 15 mm. It will require a minimum of 1.46 inches or 37 mm between the top of the tire tread and the wheel well.
This will work well for your 2019 GMC Yukon XL Denali with retractable running boards.
You may also want to consider... view full answer...
To flat tow your 2015 GMC Yukon XL you'll need the following components:
Baseplate: Roadmaster Direct-Connect Base Plate Kit # RM-523179-5.
Tow Bar: etrailer XHD Non-Binding Tow Bar # e84ZR. This tow bar comes with safety cables bracketed to the arms to prevent them from dragging on the ground. The head and shank can be adjusted to help keep the tow bar level between the motorhome and Yukon. Roadmaster base plate pins # RM-910029 are required to complete the connection to your Roadmaster... view full answer...
If you already have the Strait-Line Weight Distribution w/ Sway Control # RP66130, you won't need a new system. You'll just need the appropriate size shank for your 2007 GMC Yukon X to get the trailer level when towing. All weight distribution shanks are universal, you just need to find the correct rise or drop, and the correct size for the receiver tube.
You'll want to measure to find out how much drop or rise you need in the shank, and you can check out our selection of weight distribution... view full answer...
The Timbren Jounce Springs # TGMRG25C are a fit for the 2004 GMC Yukon 1500 XL with Air Ride as long as it is the 4-wheel-drive version. These bolt on without drilling in place of the factory bump-stops. They work independently and offer progressive resistance as the load on them increases. I linked an install video for you.
If you have the 2-wheel-drive version then instead you'll use part # TGMRYS4. view full answer...
I checked with Aries and for the Aries Big Horn Bull Bar with Removable Skid Plate # AA45-4016 that you referenced they have it listed as "it may interfere with the sensors" but they also said that the sensors on the bumper of your 2017 GMC Yukon XL are so far to the outsides of the bumper that the guard shouldn't interfere realistically and they haven't had any complaints yet. view full answer...
The Curt Trailer Hitch Receiver # C15324 has only been confirmed to fit on the factory bumper. With your 2004 Yukon XL Denali having the street scene roll pan it likely will not require any modification if they designed it to fit with the factory receiver hitch. I wasn't able to get that information from street scene. view full answer...
The closest thing to an air bag kit that fits your 2002 GMC Yukon XL Denali 1500 is the Air Lift 1000 Air Helper Springs # AL60769 which fit inside your suspension coils.
These kind of kits are okay, but can be prone to getting pinched inside the suspension coils if you aren't careful and you forget to routinely check the air bags, so I actually recommend using the SumoSprings # SSR-204-40 instead.
The SumoSprings replace your OEM jounce bumpers and have 3 key factors as to why I really... view full answer...
You are right there are a whole lot of choices for floor mats for your 2019 GMC Yukon XL so I will give you exactly what you need for yours that has three rows of seats with the second row being a bench seat. WeatherTech is a great choice because they are extremely durable and are going to catch every bit of dirt and grime that enters your Yukon, keeping it clean for ages. Customers have left hundreds and hundreds of reviews on our site of these mats and they have gotten a nearly 5-star... view full answer...
Yes, the Timbren rear helper springs, # TGMRYS4, will fit your 2016 GMC Yukon XL 4x4. After installation, there is no maintenance and you will not have to worry about adding or removing air.
If you are interested in a set for the front use # TGMFK15B. I have linked instructions and our Timbren help article for you. view full answer...
I have an answer for you. Unfortunately, the WeatherTech Cargo Liner # WT42328 is not desinged to fit your 2012 GMC Yukon XL. Although, there is a cargo liner that is designed for your vehicle: the WeatherTech Cargo Liner # WT40310.
I confirmed with my contact with WeatherTech that the only way to use the Cargo Liner # WT40310 with the third row seating up is to cut the cargo liner to fit the foot space in front of the seats of the third row. If you choose to cut the liner, you will be... view full answer...
The best replacement option we have for an Atwood G6A-7 Water Heater (Gas Only, 6 Gallon, Manual Pilot) is the Atwood RV Water Heater part # AT96121 (Gas Only, 6 Gallon, Auto Pilot). The only difference is this model has an automatic pilot whereas your old model had a manual pilot. view full answer...
The stock bump stops on your 2005 GMC Yukon XL should be located outside of the coil springs so they would not interfere with the AirLift system you installed. You could add some different rubber springs such as # TGMRYS4 but since you already have the air bags installed you would not need to upgrade the bump stops.
If they are in bad shape you could get some replacements either from a GM dealer or inquire at a local auto parts store. Or if you want bigger ones you could install the Timbren... view full answer...
Most of the time the hitches on the 2007 GMC Yukon are 2" hitches but you would want to measure to be sure. You will want to measure the inside dimensions of the hitch opening. I have attached a help article explaining how to measure the hitch opening. Since you are most likely trying to figure out what size ball mount you need, I have also attached our selection of ball mounts a long with a helpful article on figuring out the rise or drop you may need to tow level with your trailer. view full answer...
Your 2008 GMC Yukon XL requires the 60 inch bars so you would use # TH711520 and then feet # TH710401.
The roof rack is rated for 165 pounds though so unless the combined weight of the tent you use and occupants is less than 165 pounds you would be over the capacity of this roof rack. If it is just the tent then it would be at the capacity but would not exceed it.
Yakima has a solution to the low weight capacities of roof racks and vehicles in the USA; take a look at the SkyRise # Y07421... view full answer...
Yes, the Ball Mount Adapter, # BA-1, will work with the Curt Weight Distribution Shank, # C17125. Keep in mind that you always want to follow the weight limitations of the component with the lowest rating so even though the weight distribution shank has a gross towing weight capacity of 15,000 pounds, you will be limited by the weight capacity of the adapter which is 10,000 lbs for towing and 2000 lbs for tongue weight. view full answer...
For your 2010 GMC Yukon XL you can use the AirBedz Rear Seat Air Mattress for SUVs # AB59FR for the 3rd row bench seat. This air mattress is designed to fit a number of different SUV's and trucks. You can use the below measurements to compare to the space you have in your Yukon XL to see how tight of a fit this will be.
- 60" long x 35-1/2" wide x 17-3/4" tall view full answer...
On the Curt Front Mount Trailer Hitch Receiver, # 31108, there is minor fascia trim required when installing on 2003 GMC 2500 Yukon XL. As far as the fitment on your vehicle with the skid plates istalled, I checked with the supplier (Curt), they said they have not heard of any problems of them fitting with factory skid plates, but if the skid plates were a dealer installed item, which is an aftermarket item, they would not know because they do not test their fitments against aftermarket... view full answer...
The best brake controller for your Yukon XL is going to be the Redarc Tow-Pro Liberty Brake Controller item # RED24FR. This is a proportional brake controller that activates your trailer's brakes when your Yukon decelerates.
The reason the Tow-Pro Liberty is the best option is because of its unique installation method where the only visible portion is the control knob that's about the size of a nickel. The main unit is hidden away inside your dash to be completely out of the way and out... view full answer...
Go To Results