Hey David, so the Reese part number 30118 is related to a hitch that was designed to fit above bed fifth wheel rails so to use it with your 2024 GMC Sierra that has the in bed puck system you would want the rail kit adapter part # C88KR. view full answer...
I recommend installing the Air Lift LoadLifter 5000 Ultimate Air Springs # AL88338 for your 2016 GMC Sierra 3500 Denali. These air springs include internal jounce bumpers which help to absorb bounce when loaded and will also absorb road shock in the suspension when unloaded. As the air springs eliminate the factory jounce bumper these air springs utilize a set inside the springs. Thee springs are rated for 5,000lbs of capacity which is plenty for your 19,000lb 5th wheel as they generally... view full answer...
I would be happy to! The bottom of the foot to the center of the pipe mount is 10-1/2" when retracted and 24-1/2" when fully extended on the Trailer Valet JXS Trailer Jack w/ Footplate and Drill Powered Option item # TV64FR.
Sorry I do not have a sheet for you or a drawing. I checked with Trailer Valet they don't list torque specs and their direction for installing the bolts is to tighten them until they are fully secure. view full answer...
Hey Gerard,
Front Runner is a South African based company with their products, including the LED Flood Light Cube # FR25WJ, being manufactured just outside of Johannesburg, South Africa. view full answer...
Reese has a gooseneck ball that fits the OEM pucks of your 2020 GMC Sierra 3500 with the part # RP23FR but this doesn't have any rise built into it. The ball you mentioned does not fit your truck. view full answer...
Both the Curt A20 # C16541 and Curt Q20 will attach to the Adapter Rails for Curt 5th Wheel Hitch # C88KR to utilize the puck system in your 2021 GMC Sierra 3500. The only real difference between the two is that the A series jaws overlap whereas the Q series butt up against each other more than overlap. The bearing and shaft that the head pivots on is different between the two as well. Basically the A-series is the updated and improved version of the Q-series so for the best version I'd... view full answer...
MORryde states that their X-Factor crossmember part # MR84AR that you referenced can be installed on all of the hangers or even just a single one. Obviously if you install it on all hangers you get maximum results though. This is a unique product and there isn't a similar option that would also work. view full answer...
Yes, you can plumb the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2709 for your 2021 GMC Sierra 3500 to your air tank filled by compressors, so long as your compressor is a 150 psi compressor. You will need to route the Single Function Air Spring Control Panel - Black # F2149 or White # F2225 from the air bags to the tank and one of the compressors.
So it is possible but certainly complicated. The other thing you can do if you like is forgo that and add a wireless... view full answer...
The BAKFlip F1 Hard Tonneau Cover # BAK37FR will stick out into the bed approximately 23" when folded to just the first of the four panels. I wasn't able to get an exact dimension for the thickness but was told the panels are about 3/4" thick so you'd be looking at the stick stick up roughly 2-1/4" from the top of the bedrails. view full answer...
Hey Richard, thanks for reaching out!
The Air Lift LoadLifter 7500 XL Air Helper Springs # AL57541 does take up the same space as the Curt 19419346 5th wheel bracket kit for your 2024 GMC Sierra 3500.
The only way to remedy this is to use the Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2709 instead. This kit has the same 7,500 lb rating that your Air Lift kit has, but the mounting brackets are designed to work with 5th wheel and gooseneck mounting systems.
I know... view full answer...
Thanks for writing in, Leo, and we do have the exact part you are looking for to get you towing with your 2022 GMC Sierra 3500. The best base rails for your truck are going to be from Curt, with the correct fit being the following:
- Curt Custom Fifth Wheel Installation Kit for Chevy/GMC Truck # C16429-204
These will work with your Reese hitch, and I like these the most because they do not require any drilling into your Sierra's frame rails to install. That's great for your truck and... view full answer...
I recommend installing the Air Lift LoadLifter 7500 XL Air Helper Springs # AL57541 which are confirmed to fit your 2024 GMC Sierra 3500 Denali Dually. I prefer these over others as they have an internal jounce spring which helps reduce bouncing when hauling heavy loads as well protect the spring should it temporarily become deflated.
The Air Lift WirelessAIR Compressor System # AL74000EZ is my favorite compressor system as it uses a smart manifold. This manifold allows you to control... view full answer...
The instructions for the Replacement Side Plates # DM49GV which fit the Demco Autoslide 5th Wheel Trailer Hitch 18K # DM79GV or 21K # DM29GV are not very helpful. I have linked them below for your verification but the 1/2" grade 5 bolts are supposed to be tightened to 75lb-ft of torque. We typically do not post torque measurements and always refer them to the instructions but as they don't exactly call out the torque spec in the instructions and make you refer to their table I felt the... view full answer...
Hi John,
From what I can see on the Cognito kits the leaf spring stack is just getting a spacer block and new u-bolts so you'll be able to install the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS3611-HD. This just clamps to one leaf spring eyelet and the other side will clamp to the other side of the leaf spring stack. This style of suspension enhancement will help support any loads you have to haul without majorly affecting your unloaded ride quality like other enhancements... view full answer...
It's recommended to use the 10" lube plate # RP83002 because that is what the manufacturer calls to use. The diameter of the lube plate has more to do with the skid plate surface area on the pin box, rather than the skid plate surface on the hitch.
You could technically use the 12" version # RP83001 as well, but there isn't any real benefit over the 10" version. view full answer...
The Draw-Tite Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" # DT45511 (no longer available) does require drilling for installation. It also requires the OEM factory bumper and brackets and allows the full size spare tire. The Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" # C15860 does not require drilling and does not require the OEM bumper or brackets. It is rated for the same capacities.
Both are great hitches, you will just take more time installing... view full answer...
Absolutely a fair question, and for your 2019 GMC Sierra 3500, the RoadActive Suspension Kit # RAS3611-HD will be effective, though likely not perfectly level. It will level a truck that has between 2 and 3 inches of squat, though personally I'd lean more towards the 2 inch mark for the amount of pin weight you have. Timbrens or other bump stops won't be effective with this system, and for 5,500 lbs of pin weight you are much better off getting air bags:
- Firestone Ride-Rite Red Label... view full answer...
Yes, the Greystone replacement microwave turntable part # 324-GLASSPLATE does fit the model number RED480JAH-PA0H2A # 324-000135 that you have in your 2022 Genesis Supreme. view full answer...
Hey Dennis, so a set of Timbrens will do a great job getting rid of the suspension sag you mentioned when towing a fifth wheel trailer. The correct kit that fits your 2022 GMC Sierra 3500 would be the part # TGMRCK25D that you referenced. This fits with your single rear wheel setup as well as your overload spring setup. view full answer...
None of the options for the prep package are specifically designed to add height. Depending on the ball you have now you might be able to get a little more height out of the B&W Ball and Safety Chain Kit # BWGNXA2061. The installed height of this gooseneck ball is 5-3/4".
If you can stand to have an offset then the Curt RockerBall Multi-Fit Ball Kit w/ 4" Offset # C78ZV actually sits the highest. This has an overall height of 11-3/4" so it will sit approximately 9" above the bed when... view full answer...
Go To Results