The Andersen Ultimate Connection 5th Wheel Trailer Hitch System with Adapter - 20,000 lbs # AM3200 uses hitch ball # AM3201 only. It is not compatible with the greaseless AlumiBall # AM3453 which is only compatible with the Rapid Hitch Ball Mount options. view full answer...
The K-Source Universal Dual Lens Towing Mirrors - Clip On - Pair # KS3990 are a great solution and will fit your 2019 GMC Canyon very well. The # KS3990 uses heavy duty rubber ratcheting straps to secure the mirrors tightly on your Canyon's mirrors, this will help them stay on and reduce vibration very nicely so the view behind you isn't distorted.
I've linked a review video of these on a 2017 GMC Canyon for you to check out as well. view full answer...
Brake controllers are not vehicle specific and can be installed in most any vehicle with proper wiring.
If you would like to resubmit your question with a little further information I would be glad to provide instructions or any information that you need for installing the Hopkins Towing Solutions Agility Trailer Brake Controller, item # HM47294, in your vehicle.
The year, make and model of your vehicle, and the type of trailer connector on the rear of the vehicle plus the type of connector... view full answer...
The Curt Front Mount Receiver Hitch, # C31074, is confirmed to fit all models of the 2016 GMC Canyon truck.
This hitch will bolt right on to the frame of the GMC Canyon with out any drilling into the truck's frame being required. However trimming of the front Air Dam and or bumper fascia may be required during installation. Also, Front skid plate will need to be removed for installation and may be left off or trimmed and reattached. view full answer...
The best solution would be a mid-level ladder rack confirmed to fit the bed of your 2015 GMC Canyon like theYakima OutPost HD part # Y01152-58. view full answer...
Yes, you can put a ST175/80D13 tire on a modular wheel. That tire size requires a 13 inch wheel that is either 4-1/2, 5, or 5-1/2 inches wide. You can use our Americana Steel Mini Mod Trailer Wheel, # AM20253, assuming the bolt pattern of your hub is 5 on 4-1/2. I have attached a help article that explains how to find your bolt pattern.
This wheel will work with radial or bias ply tires and as long as the bolt pattern is compatible, you will not have a problem. view full answer...
When installed in the receiver, the highest point of the Reese 24x60 Railed Cargo Carrier # 63153 is about 8 inches above the shank that slides into the receiver.
Since I cannot say with certainty how far below the tailgate your receiver falls on your Canyon, if you would hold a measuring tape even with the top of the receiver opening and measure up 8 inches, you should be able to determine whether the carrier would interfere with opening your tailgate fully. view full answer...
Yes, the B&W Biker Bar Motorcycle Tie-Down System # BWMC2301 could be installed in a truck bed but doing so will require modifications to the standard trailer deck installation.
You will need to weld steel plate to the frame under the bed to accept the Biker Bar mounting hardware since the bed material itself is not strong enough to handle the load from the carrier. You will also need to add material on top of the bed to fill in the spaces between the bed's corrugations so that they are... view full answer...
Bestop soft camper shell # B76302 is the correct model for your 2016 GMC Canyon with the 6 foot, 2 inch bed. They do not make one for the shorter bed models. view full answer...
It sounds like you're talking about a tailgate mat like the # BR66ZR when you say tailgate cover. If that is the case then this would be will be compatible with the Access Custom Truck Bed Mat # A44VA and both are confirmed to fit your 2023 GMC Canyon. view full answer...
Yes, you can use the Even Brake supplemental braking system # RM-9400 with your 2015 GMC Canyon. To make sure the braking system is properly positioned and working effectively we also recommend the stoplight switch kit # RM-751472. It will activate the RV monitoring system to alert you when the brakes of your towed car are being applied. Without it you would not know if the brake pedal in the Canyon is actually moving or not. view full answer...
Yes, the etrailer Invisible Base Plate Kit # e98966 for your 2017 GMC Canyon is compatible with a Blue Ox tow bar like the Avail # BX7420. Just be sure if you are using a different tow bar that it still has the Blue Ox style ends on the bars.
Blue Ox recommends using their Tail Light Wiring Kit # BX8869 and you will need a battery disconnect unless you plan on physically connecting and disconnecting your battery. Do note if you use a supplemental braking system and physically disconnect... view full answer...
There is not a plug-and-play style connector for an aftermarket brake controller for a 2018 GMC Canyon so you would have to splice into the factory wiring. You'll need to look for the cold side of the brake light switch by checking the wires coming off of the brake pedal with a tester # PTW2993. The wire that lights up only when the brake pedal is depressed is your brake light switch wire. If you can't find it or the wire is too thin of a gauge to splice into then you can use the Roadmaster... view full answer...
Yes, you will be able to use your Roadmaster Stowmaster Falcon 5250 tow bar with the Roadmaster base plate kit for the 2008 Canyon by GMC, item # 3122-1. You may need the the Roadmaster Quick Disconnect Tow Bar Base Assembly, item # 910021-00, if you did not retain these items from the last towed vehicle. If you retained the support bar but not the car side quick disconnects you will need part # RM-222.
Other items you may want to consider to help complete your dinghy towing setup are... view full answer...
The website description is wrong. I checked with Lomax and the B2020119 Lomax Professional Series Hard Tonneau Cover our item # LOM53BR has a diamond plate finish. The B0020119 Lomax Professional Series Hard Tonneau Cover our item # LOM55BR has the Black Diamond finish.
For a Lomax Tonneau Cover with a Black Diamond Mist finish that fits the 5 foot bed on a 2023 GMC Canyon you will want item # LOM63BR.
I pulled all of this information and part numbers directly from Lomax. Thanks for... view full answer...
For your 2015 GMC Canyon, if you want to avoid having to splice wiring, you can use a bulb and socket kit such as # RM-155 or a magnetic light kit such as # RM-2120. I have included a link to all of the other options as well. view full answer...
As there is a 5' bed and 6' bed option for your 2021 GMC Canyon you will need to select the correct Ladder Rack based on the bed length. The TruXedo Elevate Truck Bed Rack System is compatible with your TruXedo Lo Pro Soft Roll-up Tonneau Cover.
For a 5' bed with the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX549801 you will want the TruXedo Elevate Truck Bed Rack System # TX86NV.
For a 6' bed with the TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX553301 you will want the TruXedo... view full answer...
To use the Roadmaster Tow Defender # RM-4750 with a Dual hitch receiver you will need to use the 8" # RM-077-8 or larger spread receivers. This will provide you with the distance required between the receivers for the defender screen to mount to your Tow Bar # RM-676. view full answer...
There are Westin Bull Bars that fit a 2015 GMC Canyon, and the best option is the Ultimate, which is available in either black or chrome:
- Westin Ultimate Bull Bar - Black Powder Coated Steel # 32-3645
These are great options because they give your 2015 Canyon a bold look along with protection for you bumper and are easy bolt-on installations that are not going to require drilling into your truck's frame.
If you need to relocate your front license plate you can use the License Plate... view full answer...
I have attached a photo of the Draw-Tite Max-Frame Trailer Hitch Receiver, part # 76004 installed on a Canyon. Although it is not perfect, you can see that the receiver end is right under the rear bumper. Since the receiver sits below the horizontal bar on the hitch, it will be tucked up behind the bumper and much less visible than the Curt hitches.
This is a Class lll hitch and it has a 2 inch receiver opening.
If you plan on doing some towing you might be interested in etrailer ball... view full answer...