The Tekonsha Plug-In Wiring Adapter # 3027-P or 3027 are actually the same but they are only confirmed to fit 2004 - 2016 Freightliner, XC Chassis. To install your Prodigy P2 # 90885 you'll need to splice the connections using a universal pigtail like # 7894 since there isn't a plug and play connector option for the 2017 or newer Freighliners.
Another option would be to use the Curt Echo brake controller # C51180, instead. This mobile brake controller does not require you to test or splice... view full answer...
The Tuson DirecLink Base Model Trailer Brake Controller - 1 to 4 Axles - Proportional # 335DL-100 you were looking at for your 2013 Freightliner M2 112 pulling a Kaufman Wedge Car Hauler will be perfect. The 335DL-200NE you were looking at has actually been discontinued by the manufacturer.
To install the # 335DL-100 in your truck you will need the Tuson Heavy Duty Truck Module Kit for DirecLink Brake Controller - 9 Pin # 335HDCON-9PIN If your truck has a 9-pin Deutsch connector, or the... view full answer...
For your motorhome on a 2019 Freightliner XC chassis I recommend the tried and true Tekonsha Prodigy P3 # 90195. This uses an LCD screen which makes reading different settings and codes much easier than trying to remember codes like with other brake controllers.
To install this on your 2019 Freightliner XC chassis you will need to do some hardwiring. There should be some loose wires under your driver's side dash or under the driver's seat where you can splice in the included pigtail to... view full answer...
We don't have steering stabilizers that fit your 1996 Freightliner that is built on an XC chassis we only have rear sway bars like with the part # RM-1209-105 which makes the biggest improvement in ride quality and stability. view full answer...
For 6 internal tire sensors with a monitor, you'll want to use the TST TPMS - Color Display - Signal Booster - 6 Internal Tire Sensors # TST-507-INT-6-C.
This kit includes 6 internal tire sensors, and also includes a color wide screen monitor. view full answer...
For your 2017 Tiffin Allegro Red with Freightliner XC with air ride, we don't have any manufacturers with compatible anti sway bars for the front or rear. We do have the Roadmaster Reflex Steering Stabilizer with Mounting Brackets for Class A Motor Homes # RM-RBK18-RSSA which will help with the tracking and road fatigue. view full answer...
It sounds like you're looking for the Replacement Bushing for Roadmaster Front Anti-Sway Bar for Motor Homes - Qty 1 # RM-205393-00, which you'll need 8 of.
For the bushings that fit around the bar you'll need the Roadmaster Polyurethane Bushing Kit for 1-3/4" Diameter, Factory Rear Anti-Sway Bar # RM-4109-106 for a complete set with mounting hardware. view full answer...
I highly recommend using the Tekonsha Prodigy P3 # 90195 for your 2019 Freightliner XC-Series chassis because the P3 has a nice LCD screen that makes it easy to read and make adjustments, plus you have the ability to save various settings depending on what you might be towing behind you. I'm not aware of any plug-n-play connectors on your chassis but you should be able to splice in the included pigtail to the existing wiring on your motorhome. Simply match the following wire colors of the... view full answer...
We have a rear sway bar that fits your 2019 Thor Palazzo 36.3 with the Roadmaster part # RM-1209-140 but the part number you mentioned does not fit. view full answer...
Tekonsha brake controller wiring adapter # 3027-P is the specified part for installing a Tekonsha trailer trailer brake controller in a 2017 Freightliner XC chassis with the tow package.
Sometimes the correct plug can be hard to spot. There may be others in the same general location. The one you want is black and it should be close to the steering column. I confirmed the part and port location with my contact at Tekonsha.
It will be a match for the connector shown in the linked photo. view full answer...
We do have the replacement end link, washers, lock nut, and bushings for the Roadmaster Front Anti-Sway Bar # RM-1209-136, though they are each separate parts. I verified with Roadmaster that the exact parts you need are the following:
- Replacement End Link # RM-B384
- Replacement Lock Nut # RM-350256-02
- Replacement Washer # RM-357434-00
- Replacement Bushing # RM-205393-00 view full answer...
As long as your 2002 Fleetwood Bounder 39Z on a Freightliner XC Chassis has air suspension the correct rear sway bar is the part # RM-1209-115 that you referenced. Everything I was able to pull up on your RV is that is does come with air suspension. view full answer...
The Roadmaster Rear Anti-Sway Bar # RM-1209-115 is currently the only suspension enhancement we have that will fit your 2001 Fleetwood Expedition 34N that is on a Freightliner XCS Chassis. You will need to confirm that your specific chassis uses air suspension with 3/4" U-Bolts on the rear axle. view full answer...
From what I found about your 2018 NewMar Ventana 4037 it is built on a 2018 Freightliner chassis and does not have a brake controller wiring setup.
You can install a brake controller but you'll have to hardwire the controller in.
You will need to start with a 4-way (if you do not have one). For that you would want the # C59496.
From there you would need to convert the 4-way to a 7-way so that you can install the brake controller. For that you will want the Brake Controller Install Kit... view full answer...
For a 2001 Frieghtliner XC-Series chassis the Roadmaster Rear Anti-Sway Bar # RM-1209-115 you referenced is the correct fit for the rear. As for the front, there is currently no confirmed fitting anti-sway bar or steering stabilizer. Most likely the mounting bracket for the sway bar has some sort of interference with the surround suspension components preventing it from fitting. view full answer...
In order to tow a trailer with brakes using your 1999 Coachmen Sportscoach on a Freightliner XC Chassis you will first need to convert the 4-way you have into a 7-way using the Universal Installation Kit for Trailer Brake Controller part # ETBC7 along with the extra wire with part # 10-2-1. These two parts will give you all that you need to correctly install the 7-way along with a brake controller of your choice.
For a brake controller I recommend using the Redarc Tow-Pro Elite Trailer... view full answer...
For your 2022 Winnebago Forza 38F on a Freightliner XC-Series Chassis you'll need the Roadmaster Reflex Steering Stabilizer for Class A Motor Homes # RM-RSSA along with the Custom Mounting Brackets for Roadmaster Reflex Steering Stabilizer # RM-RBK18. I've attached a video below where Shane will go through the installation process to give you a better idea of the process (keep in mind that your brackets are different so the installation may differ a bit).
You can also upgrade/add on anti-sway... view full answer...
Since your Diesel Pusher RV has a full Functional 7-way connector the Curt Echo Wireless Trailer Brake Controller # C51180 will work perfectly given that your trailer does not have more than 2 braking axles.
The great part about the # C51180 is it is removable and works in any vehicle with a functioning 7-way connector, so you can use it in multiple vehicles if needed.
I included a video of the # C51180 for you to take a look at. view full answer...
That looks an awful lot like a Penguin or Dometic RV Air Conditioner. We offer the Replacement Cover # AT3308046006 which appears to be very similar, only white in color. The # AT3308046006 cover is 7" tall, 29" wide and 40-1/2' long. I do suggest measuring your cover to confirm fitment. The only other way to confirm fitment would be to cross reference the model number of your air conditioner. Otherwise measuring will have to do. view full answer...
Yes, we do have a way to plug in a Redarc Brake Controller like item # RED24FR or item # RED44FR to the factory port on your motorhome's Freightliner XC Chassis. Since your motorhome's older you will need to use two separate connectors. The Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers item # 3027-P and the Redarc Tow-Pro Wiring Adapter for Tekonsha Brake Controller Harness item # 331-TPH-017. These two harnesses combined will give you a plug and play installation. view full answer...
Go To Results