The Hayes Genesis # HA81790 with the adapter # HA81785-HBC is exactly what you need if your 2005 Toyota Tundra has the factory 7-Way. If your Tundra doesn't have a factory 7-Way then you'll need to use the pigtail # HA81789-HBC instead of the adapter, plus you'll need to install a 4-Way # C59236 and the Universal Installation Kit # ETBC7.
As far as the air bag suspension goes, the Firestone # F4130 are for new Ram pickups so for your Tundra you're going to need the Firestone Ride-Rite... view full answer...
The Replacement QM3 Quick Mount Hardware Kit part # TH04997 will work with a Thule Frontier Cargo Box and will mount on Yakima Round Crossbars so you will be good to go. There would not be any sort of additional adapter needed for this. view full answer...
Yes, the Demco Recon 5th Wheel Trailer Hitch part # DM8550043 can be used with a rotating pin box so long as you also obtain the 5th Airborne Custom Wedge for Hi-Jacker Fifth Wheels part # SWW-05. The Demco Recon Gooseneck-to-5th Wheel Trailer Hitch Adapter part # DM8550045 cannot be used with a rotating pin box which I think is where the confusion lies.
In order to use the Demco Recon 5th Wheel Trailer Hitch on a 2019 Ford F-150 you need the Demco Hijacker Premier Series Above-Bed Base... view full answer...
In order to use a Blue Ox Tow Bar with the Roadmaster Crossbar-Style Base Plate Kit part # RM-523182-4 for a 2020 Chevrolet Colorado you will need the Blue Ox Tow Bar to Roadmaster Base Plates Adapter part # BX88178.
In order to use a Blue Ox Tow Bar with the Roadmaster Direct-Connect Base Plate Kit part # RM-523182-5 for a 2020 Chevrolet Colorado you will need the Blue Ox Tow Bar to Roadmaster Base Plates Adapter part # BX88185.
The Blue Ox Tow Bars and Roadmaster Base Plate Kits are... view full answer...
A weight distribution will be a big help in regards to both ensuring you tow level and sway control, but it will not have a factor on how much tongue weight your 2016 Jeep Cherokee Trailhawk is able to handle. According to the owner's manual I looked up, the max tongue weight of this vehicle is 450 lbs with the 3.2L engine and Trailer Tow Package, so that is what you are limited to. Since tongue weight is approximately 10% - 15% of the trailer's GVWR, 450 lbs is very much pushing it with... view full answer...
The installation of the Westin HDX Grille Guard with Punch Plate # WE46FR (Polished Stainless Steel) or # WE66FR (Black Powder Coated Steel) on your 2020 GMC Sierra 1500 will interfere with any front sensors on the truck.
There isn't a grill guard that will install on your 2020 Sierra 1500 that will not interfere with those sensors, though the trade off is you get a superb-looking and highly protective guard for the front of your truck.
I have added links to the instructions of the Westin... view full answer...
The correct TruXedo Lo Pro tonneau cover for your 2012 Ram 2500 with a 6-1/2 foot bed will just depend on if you have Ram Boxes or not:
- WITHOUT Ram Boxes: TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX546901
- WITH Ram Boxes: TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX547901 view full answer...
We do have a bike rack that works for your application, but unfortunately, the Hollywood Racks bike rack # HRF2-3 does not fit your Wrangler correctly. Your spare tire will be in the way for # HRF2-3 and it's designed for a hatch style rear door. I recommend the Surco # BT300 spare tire bike rack which offers you a total weight capacity of 105-lbs or 35-lbs per bike so you can carry your bikes with no problem. The Surco rack fits around your stock size spare tire and doesn't make contact... view full answer...
The Reese Revolution pin box will work really well to tow a trailer with your short bed 2020 Ford F-150 because it moves the pivot point back to help you make sharp turns without interfering with the cab. A fixed hitch is what you need to tow with the Revolution because you do not want to pivot points like you would with a slider and the Revolution together.
I recommend to use the Reese 20K M5 5th Wheel Trailer Hitch part # RP30928 and the Reese Quick-Install Custom Installation Kit w/... view full answer...
The correct Roadmaster Reflex Steering Stabilizer for a 2020 Thor A.C.E. Motorhome is the Roadmaster Reflex Steering Stabilizer part # RM-RBK22-RSSA which is a direct bolt-on fit. In regards to installation, this is very easy to do but you will need a rather large pry bar to remove the nuts on the factory u-bolt but aside from this there should be no issues. The steering stabilizer is going to do an excellent job of helping keep the steering wheel on a center line while traveling down the... view full answer...
The square crossbars of the Malone Megasport trailer part # MPG535 are compatible with Thule accessories that were designed to fit square bars. view full answer...
The part number you mentioned is for a mounting bracket as opposed to a camera system, but I can tell you the mounting bracket is for a Furrion Vision S system, and we do have replacement monitors for that system:
- 4.3" Monitor: Replacement 4.3" Monitor for Furrion Vision S Wireless RV Camera System # FR77FR
- 5" Monitor: Replacement 5" Monitor for Furrion Vision S Wireless RV Camera System # FR97FR
- 7" Monitor: Replacement 7" Monitor for Furrion Vision S Wireless RV Camera System... view full answer...
So technically Thule says that the Gateway Pro # TH88VR will fit your 2013 Nissan Rogue but we have received a lot of feedback stating that any type of trunk mount rack that uses straps will actually damage the spoiler which is why we don't show it as a fit.
Your best options are to either go with a roof mount rack like the SeaSucker Mini Bomber # 298-BM2006 (which is a roof rack and bike rack all in one) or by installing a hitch # e98846 and using a hitch mount bike rack like the Hollywood... view full answer...
The Dampered RV Floor Register # 37202-28915 that you referenced is a size that is very common for RV applications but not for houses which is why you'd want this over something you'd find somewhere else. Also in general RV components were made to be as lightweight as possible as this comes in at less than a lb. view full answer...
In order to upgrade to larger wheels/tire like the Provider ST175/80R13 Radial Trailer Tire w/ 13" White Wheel - 5 on 4-1/2 - LR C # TA43RR you need to first confirm the bolt pattern on the wheels which for the above is 5 on 4-1/2" and then the dimensions which are 24" diameter x 7" wide. The 5.30-12 tires measure 21.5" diameter x 5.3" wide which means the new size will be around 2.5" larger in diameter and 1.7" larger in width but keep in mind you only need to account for half of these... view full answer...
The Malone MegaSport Kayak Trailer # MPG535 has 86" wide crossbars so you will be able to lay both kayaks side-by-side and they will stick out 1" on either side.
The best kayak carrier for your application is the Malone MegaWing Fishing Kayak Carrier with Tie-Downs # MPG207 because you will be able to easily load up each kayak and it has a weight capacity of 150 lbs so it should be able to handle the size of your kayaks just fine. Obviously you'll need 1 set of this carrier per kayak.
We... view full answer...
Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have. view full answer...
Access has developed a Vanish soft roll-up tonneau cover with the multi-function tailgate in mind. The # A92429 is specifically designed to work with the multi-pro grab handle, as there is a mounting notch in the cover's side rail that allows the grab handle to work perfectly. Since you were happy with your previous cover, this model would work great for you. view full answer...
The Jensen # JWM20 will be considerably smaller than your current stereo. The stereo you currently have, part AWM910 uses a rough opening of 9.3 inches by 6.16 inches, while the # JWM20 uses a 3.81 x 2.9 inch mounting hole. Depending on the surface the stereo is currently mounted on, it's likely possible to place a nicely finished board over the existing hole and the cut the correct size hole in it for the new stereo.
If you don't feel like dealing with that hassle, you can use a stereo... view full answer...