While I cannot say exactly what supply hose you need coming out of your Regulator # 37207-31525, I can help you to determine which hose you will need. Typically you will find a hose like the Supply Hose # 100383-48-MBS coming out of the regulator and down to the solid steel pipe under the trailer. You will need to verify the regulator side has a 3/8" MPT fitting and the steel pipe side is 1/2" FPT. This particular hose is 4' long. If you find you have different connectors or a different... view full answer...
The only solution for a new bracket on your Low Profile LED Combination RV Tail Light w/ Bracket - 4 Function - 8 Diodes - Round - Driver Side # RVSTL11 is total replacement. Unfortunately, a replacement bracket is not available as an individual replacement part. view full answer...
It sounds like you are lookin for a fresh water tank drain. If that is the case, then the Camco RV Evacuation Flange for 3/4" Diameter Drain Hose # CAM37271 is likely what you need.
If you are looking for just the plug itself you can use the Camco 3/4" Replacement RV Fresh-Water Plug w/ Lanyard # CAM22103.
If you are looking for a water heater drain, then I recommend the Camco Water Heater Drain Valve Replacement - 1/2"# CAM11703 or 1/4 inch # CAM11663. view full answer...
To replace the garnish on your MaxxFan Roof Vent # MA00A04401K you will want the Ceiling Garnish # MA54FR. This garnish is 5-3/4" tall and can be trimmed if required to fit the roof height on your 2020 Forest River Flagstaff Micro Lite.
The Garnish # MA54FR will also fit
4000K # MA00-04000K
4002K # MA00-04002K
4301K # MA00A04301K
4500K # MA00-04500K
4751K # MA00-04751KSX view full answer...
If you're referring to the lid of the vent I would need to either know the brand and model number to determine the correct replacement or you could just use a universal replacement like the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335002. This lid comes with a hinge that you'll mount to the sides of the vent so that you don't have to worry about any compatibility issues.
if you're referring to a cover that goes over the lid so that you can use the... view full answer...
If you want to replace all the vent assemblies on the trailer then the world is your oyster! The standard roof vent such as # V2092SP-28 fits a 14-1/4 inch square opening. You can use this one or any of the others listed in the link included below to replace the manual vent without a fan.
For a basic vent with a 12 volt fan you can use # FV802250 or any of the models listed in the other link I have provided. I have linked a video review of the above-mentioned fan/vent.
The skylight though... view full answer...
Go To Results