If your Blue Ox tow bar is an RV mounted tow bar, then part # RM-077-2 will work if your receiver is a 2 inch by 2 inch receiver. An RV mounted tow bar will have the shank to fit into one of the 2 inch by 2 inch openings of part # RM-077-2.
If your Blue Ox tow bar is a vehicle mounted tow bar, then part # RM-077-2 will not work, as it will have a ball mount coupler on the end of the tow bar.
As long as your Blue Ox tow bar is an RV mounted tow bar, as it would disconnect from the vehicle... view full answer...
The Curt trailer hitch # C11105 installs to the bottom of the frame rails on a 2003 Ford ZX2. I have included a link to the installation instructions for you so you can see just where the hitch will install.
If you plan on doing some towing, the correct ball mount to use is # 3593. For a ball you can use the 1-7/8 inch diameter, # 19256 or the 2 inch diameter # 19258. You will also need hitch pin and clip # PC2.
For trailer wiring, use # 118344. I have included a link to the installation... view full answer...
Go To Results