For your 1984 or 1985 Ford E Series, you will want the Adco Deluxe Windshield Cover for Class C Motorhome # 290-2501 which is a confirmed fit. I've attached a video to assist.
The Adco Deluxe Windshield Cover # 290-2507 is not the correct fit for you. view full answer...
You would choose a weight distribution system based on the tongue weight of the trailer. You would want a system that has a tongue weight capacity range that encompasses the trailer tongue weight loaded and ready to tow.
With a Tongue weight of 700 to 750 pounds, a system rated for 600 to 1,200 pounds tongue weight would be a good fit. Having a system rated a little higher will have a stiffer ride when you tow, but it is much better than to have a system that is rated too low. With a 600... view full answer...
To see where the brake controller port is on your 2011 Ford E-450 motorhome check out the picture I attached. The plug will be behind the door that is pointed out using the screwdriver in the picture.
The # 3034-P harness you referenced is the correct harness to use.
For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup. view full answer...
For your 2015 Lexus IS 350 you would want the Curt Hitch part # C11389 that you referenced.
For a ball mount you would want part # C45521, 1-7/8 inch ball part # 19256, 2 inch ball # 19258. view full answer...
For a rear mounted hitch for your 2006 Ford E350 I would recommend the Curt Hitch part # 14055. I attached an install video for you to check out to the right.
For trailer wiring you would want the part # C56020.
For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
If you were looking for a front mounted hitch instead you would want the part # 33055. view full answer...
The Westin Fey Diamondstep Rear Bumper - Black Powder Coated Steel part # 20107 is a confirmed fit for your 2009 Ford E-150 Van. It comes with the brackets pre welded into place to allow you to attach it directly to the factory attachment points. view full answer...
Based on the chassis and your weight of your 2012 Ford E-350 cutaway chassis the SumoSprings you'd want the part # SSR-106-47-1 which has a 4,600 lb capacity. The part numbers you mentioned are for a truck chassis. view full answer...
For a front hitch confirmed as a fit for your 2007 Ford E-450 we have the Draw Tite part # 65001. It has a vertical load limit capacity of 500 lbs too. view full answer...
The correct steering stabilizer for your 2012 Ford E-450 motorhome Class C depends on the size engine your RV has. If it is a V8 you would need the part # RM-RBK2-RSSC. If it is a V10 instead you would want the part # RM-RBK24-RSSC. view full answer...
Thank you for the picture!
Since your 2000 Ford E-450 Shuttle Bus does not have any custom fit trailer hitch receiver options, you will need to have one of the following universal trailer hitch receivers fabricated to fit your vehicle.
The most likely two options are the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-16 or the # 41990-07 which has shorter 7" tall mounting brackets.
While there are other options, the only differences are the length of the mounting brackets.... view full answer...
The ClearPlus Heavy Duty Windshield Wiper, part # CP77321 you mentioned will not work with the arms you have on your 2007 Ford Van but I do have a solution for you.
The Wipers I recommend are the ClearPlus Sentinel Windshield Wiper Blade, part # CP11201. This wiper blade is designed to work with the following arms: bayonet, 3/4-inch large hook, 1/2-inch small hook, 1/4-inch side pin, and 3/16-inch pin.
This wiper blade measures 20 inches long.
These are sold individually so if you... view full answer...
I checked with Curt and the Curt Trailer Hitch part # 14055 that you referenced is confirmed to fit your 2006 Ford E-150.
I attached installation instructions and an installation video for this hitch for you to check out as well.
To complete your towing setup you may also be interested in the following products:
etrailer Ball Mount kit # EBMK2216
Draw Tite Trailer Wiring # 18252 view full answer...
For your 2014 Ford E-350 cutaway chassis the Curt hitch part # 14055 would be an excellent option. I attached a picture that shows it sticks out a decent amount from the rear of the frame as well. view full answer...
For your 1989 Ford E-350 van I recommend the Curt Trailer Hitch Receiver, part # 14053.
This is a Class lV trailer hitch and it has a 2 inch receiver opening. This hitch has a maximum gross trailer weight of 10,000 lbs and a maximum tongue weight of 1,000 lbs. This is a bolt-on installation and no welding is required.
The 6,000 lb hitches we offer for the Ford van are not designed to fit the E-350 chassis.
When you are planning on towing you will need to make sure you do not exceed... view full answer...
All of the hitch fits we have for your 2013 Ford E-250 Cargo Van are going to stick out a decent amount behind the rear bumper. There isn't a way around it so if you wanted the higher capacity hitch the part # 41906 would be a great option since it has a 1,000 lb tongue weight capacity. view full answer...
The SumoSprings I recommend for your 2004 E-450 Cutaway is part # SSF-106-40.
These springs are progressive load springs which means they will stiffen as more weight is added to the front of your E-450. The springs work independently for offset loads and they are a no-drill installation. You simply replace the OEM bump stops and install these springs in their place. view full answer...
For a 2000 Ford E-450 you need to look at hitches for the full size van models, see link. The most popular option is # 75703. I have linked instructions and a video showing a typical installation for you.
If your van is an RV cutaway model then The only hitch that is going to work for a 2002 Ford E-450 RV cutaway model is a multi-fit motor home hitch like # 13703. I have included a link to the installation instructions for you to view. view full answer...
Yes, the Draw Tite hitch part # 65053 that you referenced has been confirmed as a fit for your 2013 Ford E-450 RV Cutaway so it would work well for you. view full answer...
I have some excellent recommendations that will not only help your 2001 Ford E-350 van last a long time but will also keep you under budget.
First, instead of just a transmission cooler, I recommend a combination engine oil and transmission fluid cooler # D15902. This will help both the transmission and engine run cooler which will in turn help get the longest life out of them. I have linked a video showing an example installation for you.
For the transmission cooler part of this combination... view full answer...
Weathertech has a great set of custom fit floor mats that fit your 2009 Ford E-350 with the part # WT26DV. The price is at the links on this page for the mats. view full answer...
Go To Results