Provided that the motor home is built on a 2011 Ford E-450 chassis and as long as the floor is the same on it as it would be on the regular E-450 vans, you could use the floor mats linked to the right.
But it is possible that the interior is different on an RV cutaway compared to a regular van. The mats are designed for and tested for fit on the regular van models though and not RV cutaways. view full answer...
Thanks for returning to etrailer.com for your towing needs.
You basically have six different options when it comes to a trailer hitch for your 2013 Ford Econoline Van.
Class III with 2 inch receiver, Curt # 13055 and Draw-Tite # 75703, both with 600 lb tongue weight capacity and 6,000 lbs towing.
Class IV with 2 inch receiver, Curt # 14055 and Draw-Tite # 41906, both with 1000 lb tongue weight capacity and 10,000 lbs towing.
Class V with 2 inch receiver, Draw-Tite # 41945 with 1500... view full answer...
We do offer frame-mount trailer hitches for RVs and these are available in either bolt-on or weld-on varieties. You can click on the included link to see all such items, such as the Curt # C13701 that carries a 500-lb tongue weight (TW) rating and a 5000-lb gross trailer weight (GTW) rating without weight distribution. Hardware is included. This is the highest-rated hitch we offer for RV applications. We have no general-purpose RV hitches rated for 6000-lbs.
It is important to check with... view full answer...
I may have a solution for you. The Curt hitch part # 14055 would fit a 2013 Ford E-350 which is what your Class B is built on. There is a chance it could fit, but since sometimes Class B motorhomes can have the frames extended you would need to measure to be sure.
This hitch is designed to fit frames that have hole centers that measure 38-1/4 inch apart and have frame members that are overall 40.13 inches. The hitch opening will be right at 1 inch below where it mounts. view full answer...
We have floor mats and liners for the first and second rows of seats and for the cargo area of the 2014 Ford E-350 full size vans. I have included a link to the options for you.
For front lines the WeatherTechs are a popular option, # WT26DV.
For the second row the mats are actually universal fit, # 46040 for black. They could be used pretty much anywhere really. view full answer...
We do offer floor mats for many vehicles including the Ford E-350 on which your Gulf Stream BT Cruiser Class C motorhome is based. Do please note that sometimes the structures that are installed by the MH maker, such as interior consoles, can change the fit of items like floor mats that are intended for the base vehicle in its stock form.
The linked page displays all floor mats made for the base 2002 E-350. You can use the drop-down menu tool at the top of the page to select your cab style... view full answer...
I attached a picture that I took from the instructions for the TracRac # TH29056XT that you referenced that shows the tech tip for the Ford E-150s like what you have. The issue is the shape of the Ford gutter. The strip pushes the J-hook clip far enough away from the gutter that it doesn't reach. view full answer...
We do offer several different 2-inch hitch receivers for your 2012 Ford E350 Super Duty Cargo Van and all can be seen on the link provided. The available hitches include options with Class III, Class IV and Class V ratings.
The most popular hitch for your vehicle is the Curt # 14055 which has a substantial tongue weight rating (downward force on the hitch) of 1000-lbs and a maximum gross trailer weight rating of 10,000-lbs. This hitch will have plenty of extra safety margin for your hitch... view full answer...
Yes, we have the Rhino-Rack Heavy-Duty Roof Rack Crossbars # RB1800B-2 that are held in place with the Rhino-Rack Roof Rack Legs # RL150S10. Or if you are looking for a Pioneer platform the Rhino-Rack Pioneer Platform Rack # RR43QX is the one you need.
Both systems attach to the gutter tracks along your 2010 Ford E-350 Van. view full answer...
We do have some options available for your 2000 Ford E-450 Chassis but unfortunately a custom-fit hitch is not available. What you need is the Draw-Tite Ultra Frame Service Body Trailer Hitch.
This hitch fits vehicles with frames up to 44" so you will be able to use it without a problem. For a 7" drop you can use the # 41990-07 and for a 16" drop the # 41990-16. This is a weld-on application so you will need to take it to a certified welder for installation. view full answer...
Actually all you need to install a brake controller in your 2010 Ford E-350 Van is the correct install harness part # 3034-P. Basically this plugs into the back of your brake controller and then plugs into the port under the dash of the van.
If you watch the install video attached you can see a van just like yours having a brake controller installed. view full answer...
I'm assuming you have a Class C motorhome on a 2013 Ford E450 cutaway chassis. If this is the case, there is a front hitch available. You'll need the Draw-Tite Front Mount Receiver, part # 65053.
You can see the installation instructions by clicking the provided link.
The # 65001 you referred to is a fit for the 1991-2007 Ford Van and Cutaway Chassis, so it wouldn't fit your vehicle. view full answer...
The trailer wiring harnesses offered for your 2012 Ford E-250 Van include 4-pole flat and 7-way RV style harnesses that can be seen on the linked page. An equivalent 5-pole harness is not made but we do have adapters that will let you convert your 4-pole to a 5-pole.
Tow Ready 4 Pole to 5 Pole Trailer Wiring Adapter # 20036 plugs in to your existing 4-pole harness and includes an additional blue wire and quick-splice connector to allow you to connect to a trailer with a 5-pole connector... view full answer...
Yes! There is a front mount hitch for your Class C RV built on the Ford E-450 van chassis. You can use Draw-Tite front mount receiver # 65053. I have included a link to the installation details for you. view full answer...
We have several options available so I am certain we can locate a fit for you but first some measurements need to be established. Sometimes a hitch that is identified for an E-350 model will work, but this is only if the E-450 has an unaltered frame and a Ford OEM van body, same as the E-350 but identified as E-450 simply due to suspension upgrades. If you have this then I recommend the Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center a Class V - 2", # 41945. This is a Max... view full answer...
We do have roof rack options for a 2004 Ford Van. I have included a link to the available options for you to view. The most popular and most economic option is the Yakima system. For it you will need the following parts:
Crossbars, # Y00410
Yakima Raingutter Towers, # Y00101
I have included a link to the installation details for the Raingutter Towers for you.
If this is a work van and you need a ladder rack option, we have those as well. I have included another link to them for you. view full answer...
Unfortunately, the backpack blower rack is only available as part of the Pack'Em Expansion Pack, part # PK-OP1.
This kit holds a blower, a trimmer line spool and a cooler. I wish these were available as a separate item but they are only available in the kit. view full answer...
We do indeed have hitches and trailer wiring for your 2009 Ford van that will allow you to retain your backup sensors.
TowReady wiring harness # 118551 will plug in at your van taillights without need to cut or splice into the vehicle's wiring. The only other connection required for this powered converter is for its 12V power wire which will run up to the engine compartment for connection to the battery through the included fuse holder - please refer to the linked article for guidance.... view full answer...
We do offer a front-mount hitch receiver for the 2013 Ford E-450 RV Cutaway Chassis that is the foundation for your Forest River Class C motor home.
Draw-Tite offers their hitch # 65053 which has a 2-inch receiver opening, 500-lb vertical load rating and which comes complete with all required installation hardware. The written installation instructions are linked for you at right along with two helpful articles concerning hitch installation tips.
If you intend to use a snow plow on the... view full answer...
For 4-pole trailer wiring for your 2007 Ford E450 van without the factory tow package you can use Curt custom-fit passive harness # C56020 or the Hopkins custom harness # HM11140495 which has a powered converter. Both are shown on the linked page.
The differences between the two are that the Hopkins kit requires an additional wiring step for installation and that it offers a much higher 8-amp output current rating. This harness will also protect the van's internal wiring from any shorts... view full answer...
Go To Results