While we do not have a chart or help article at this time I can help you position your hangers on the trailer frame. As you are converting your camper to a car hauler you will need to determine if you are going to need to reposition the center of the axles depending on the load and if the trailer is being shortened to keep the tongue weight at aproximately 10-15% of the total trailer weight. The Equa-Flex Cushioned Equalizers # LC314336 is 14-5/8" from center of each shackle hole to shackle... view full answer...
Hey Paul, good question, and I checked directly with EcoHitch for you, and their hitch is only for the RS. There is an option for a hitch that fits your 2016 Ford Fusion SE Hatchback, and has a completely hidden crosstube, just like the EcoHitch. What you would need for that is the Draw-Tite, at the following part number:
- Draw-Tite Sportframe Trailer Hitch Receiver # 24872
The # 24872 has a 1-1/4" receiver, so not a 2" receiver like the Draw-Tite, but on the plus side does not require... view full answer...
Hi Daniel,
Yes, the Brake Buddy Select 3 Portable Flat Tow Brake System # HM39524 is going to wire directly to the battery for power so you would be able to still use it even though you'll be disconnecting the battery. If you need any other help picking out the rest of your flat tow setup then just let me know. view full answer...
If only the left turn signal isn't working on the towed vehicle and is working on the motorhome then you most likely have a loose or damaged wire running to the left tail light, the diodes are bad, or the # RM-154 wiring was installed incorrectly. You essentially have two power sources and the diode just acts as a sort of transfer switch to allow the motorhome to power the lights when connected or the vehicle to power the light when not connected.
If the vehicle has separate lighting... view full answer...
Go To Results