For your 2019 Ford E-450 Cutaway, I recommend using WeatherTech All-Weather Front Floor Mats part # WTW51 for black, part # WTW51GR for gray, or part # WTW51TN for tan. Like you said, the manufacturer does not recommend using these or the thermoplastic option because you have the vinyl flooring. These recommendations are ruber, and not thermoplastic.
The above floor mats are all custom fit options which means they are contoured specifically to match the footwell in your cutaway. I have... view full answer...
A rear sway bar for your 2017 Thor Class C built on a Ford F-450 chassis like the part # RM-1139-147 would make the biggest improvement in handling and stability. Next a front sway bar like part # RM-1139-176 would be a great option as well. view full answer...
Yes you can add the yellow SumoSprings kits for your 2023 Entegra Odyssey 24 B with the part # SSF-111-60 for the front and the part # SS94VR for the rear. The rear set is a leaf spring style as there isn't a jounce spring option available at this time. view full answer...
The E-450, is a van chassis that your 2016 Thor RV is built on, which is different from the F chassis you also looked at.
The front hitch that you will need for the E-450 chassis on your Thor is # 65053.
I have linked the above mentioned product to this page for your convenience. view full answer...
Doing some research on your 2017 Jayco Redhawk, it looks like it has a Ford E-450 chassis. If that is the case, then we do offer some custom fit floor mat options that will work great.
For the best option that complements all interior colors, I recommend the WeatherTech Front Auto Floor Mats # WT26DV. These black mats are custom-designed to fit the exact contours of your vehicle. Also, the mats come with the WeatherTech lifetime warranty and are 100% made in the U.S.A.
To keep the mats... view full answer...
Because of the design of your truck bed and frame there is no standard gooseneck hitch available for your 2016 Ford Cab And chassis, but we do have a solution.
I recommend the Curt Gooseneck Flat Plate, part # C65500. Typically, the C65500 is placed on top of the flat bed over the rear axle. You will need to drill holes through the plate and the bed and into the truck frame. The recommended hardware to use is 1/2 inch grade 5. view full answer...
We do have hitches that will fit your 1996 Ford F-450, but the Curt Trailer Hitch Receiver # C15845 you referenced is not a confirmed fit.There are 3 options for your f-450 Cab and Chassis, a 2" receiver tube, 2 1/2" receiver tube and Pintle mount hitch :
The Buyers Products Hitch Plate for Pintle Mounting - 1/2" x 15-1/2" - Ford # 3371809030B
The Buyers Products Hitch Plate with 2" Receiver Tube - Ford # 3371809060A
The Buyers Products Hitch Plate with 2-1/2" Receiver Tube - Ford # 3371809061A
Each... view full answer...
Thank you for the picture that really does help figure out what'll be best for you.
It appears for your right/left rear outside tires, you could benefit from an extender that has a bend in it, like the Wheel Masters Tire Pressure Valve Extenders - 135-Degree Bend # WM8029135.
For your inside tires, I'd recommend going with a simple straight extension like the Wheel Masters Tire Pressure Valve Extenders - Straight # WM80293 which measures 3" long.
We also have those straight extenders... view full answer...
For your Jayco Greyhawk on a 2019 Ford F-450 chassis I recommend using a Husky Liners custom fit floor mat which comes in Tan # HL33253.
These liners have the raised edges to help keep any liquid and debris on the mat and they are contoured to your floor for the best fit. Attached is a review of these on a 2017 Thor Motorhome for you to check out.
If you're needing black mats then we also have the WeatherTech Mats # WT26DV. view full answer...
The brake controller install harness you need to install the Tekonsha Primus IQ part # TK90160 in your 2018 Ford E-450 is the part # 3040-P.
The brake controller plug will be located behind the dash in one of two places, as you can see in the photos I've provided. view full answer...
To get back some of the power you lost on your 2016 Ford F-450 cab and chassis we have the Edge Stage 1 Performance Kit w/ Diesel Evolution CS2 Programmer and Jammer Air Intake # EP19003 which will give you much more than 100 horsepower! view full answer...
For your 2017 Ford F-550 Cab and Chassis, you will need to do some custom fabricating to have a gooseneck hitch option. There is not a custom fit frame bracket available that is a fit. I recommend the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs # BWGNRK1500 that will require custom welding to install. I've attached the installation details so you can see what will be required for this hitch to be compatible. view full answer...
For your 2016 Ford E-450 Winnebag Aspect Class C RV the WeatherTech Front Auto Floor Mats # WT26DV are the correct mats. These are black and are custom fit so they will fit great. view full answer...
The best brake controller for your 2019 Ford E-450 Cutaway is the Redarc Tow-Pro Elite Trailer Brake Controller item # RED44FR. The Tow-Pro Elite is very similar in design to a factory trailer brake controller. There is a control box that gets installed under the dash, out of sight and then a control knob that gets mounted on your dash wherever you prefer. This will provide a very clean look and will allow you to mount it in many different locations whereas a standard brake controller will... view full answer...
For your 2018 Ford F-450 Cab and Chassis with Flatbed, the best gooseneck hitch option is the B&W Turnoverball Underbed Gooseneck Trailer Hitch for Flatbed Trucks - 30,000 lbs # BWGNRK1500. This is a weld in application. Then for a 3 inch ball instead of the standard 2-5/16 inch ball, you will use the 3 inch Hitch Ball for B&W Turnoverball # BWGNXA2025. view full answer...
I looked up your 2017 Thor Windsport Coach and it uses a single pull out step just like the Kwikee 28 Series part # LC3747453 that you referenced so this would easily replace what you have and work well. It will pull out automatically when you open the door and retract when you close it. view full answer...
You are correct that the Roadmaster Reflex Steering Stabilizer with mounting brackets for a class is, # RM-RBK24-RSSC. This is a confirmed fit for the 2006 E-450 van chassis with either V8 or V10 engine. The rear anti-sway bar you identify, Roadmaster # RM-1139-147, is also for this model year and chassis.
However, I suggest the Roadmaster, # RM-1139-115 for the front anti-sway bar. view full answer...
Yes, the Pulse Preventer for Electric Brake Controllers # 5501 is exactly what you need to keep the EOH actuator from activating while your hazard lights are on.
Hazard lights are tied into the stop light switch just like your Prodigy P2 # 90885 is. That is why the P2 will send a pulse signal when the hazards are activated on your 1997 Ford F-450. view full answer...
In regards to choosing the correct valve stem extenders, this will really come down to your specific application so it would be hard for me to help you pick out a set. The Wheel Masters Tire Pressure Valve Extenders part # WM8029 usually work well on the front and the Wheel Masters 2-Hose Inflation Kit part # WM8005 is a good option for the rear. These will both work great with screw-on cap style TPMS. view full answer...
I spoke with my contact at Draw-Tite, and if your motorhome was built on a 2017 Ford F-450 Chassis, then the Draw-Tite Front Mount Trailer Hitch Receiver # 65076 is confirmed to fit and will work great. This hitch has a line pull limit of 9,000 pounds and vertical load limit of 500 pounds. No welding will be required during installation and the complete hardware kit is included.
I have attached the installation details for you to review. view full answer...
Go To Results