I contacted the manufacturer about replacement load bars for your discontinued Thule Xsporter 421/422 and because it has been discontinued there are not replacement load bars available. The Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack # TH500XT is the current model available of the Xsporter system from Thule. view full answer...
The TorkLift SuperTruss Hitch Extension # TLE1548 is the only 48" hitch extension we carry capable of supporting the 10,000lbs of trailer weight you are wanting. This extension must be used with the TorkLift SuperHitch Original Trailer Hitch Receiver # TLF1002 on your 2013 Ford F-350. The Extension # TLE1548 is capable of towing up to 12,000lbs with up to 1,200lbs of tongue weight when using a weight distribution hitch. Without a weight distribution hitch trailer weight is limited to 6,000lbs... view full answer...
The Yakima BackSwing Swing Away Hitch Extender # Y02483 will allow you to add the etrailer Hitch Mounted Spare Tire Carrier # e98ZR to the receiver on your 2017 Ford F-350. You will likely need a Reducer # C45408 to go from the larger 3" receiver to a 2" receiver.
If you are doing hardcore off-roading you may consider using an aftermarket bumper with swing away tire carrier as they are more robust and will sit higher not affecting your ground clearance. view full answer...
For your 2015 Ford F-350 short bed that has the factory fifth wheel rail kit the best slider hitch we offer is the B and W Companion Slider for Ford Rail kits part # BWRVK3370. This USA made hitch is widely considered to be the best hitch because it's very easy to use, is well made so it will work well for a long time, and because it holds the king pin of the trailer very tightly which gives you a quiet and smooth ride quality. If you are looking for the best this hitch is the best.
I... view full answer...
According to Draw-Tite, their # 65049 carries over to the 2016 model F350. Since the Draw-Tite hitches carry over, it's likely that the Curt # C31018 will carry over also, however because Curt hasn't confirmed the fit yet we cannot make any guarantees. To see the installation instructions or view an install video, please click the provided links. view full answer...
We offer adjustable ball mounts for both 2-inch and 2-1/2-inch hitches, such as the 2-1/2-inch Class V hitch from Curt # C15802, which fits your 2017 Ford F-350 pickup. The linked page displays all 2-1/2-inch adjustable ball mounts which are all multi-ball types. You can click on the filters on the page to select the amount of rise or drop you need and to select your preferred material, steel or aluminum. We also offer ball mounts from Weigh Safe that have built-in tongue weight scales,... view full answer...
We do indeed carry the Trailair Flex Air. Our part number for it is # LC328492, and if you click the provided link, you can see current pricing information. I've also linked you to a product demonstration video. view full answer...
The adapter you need is the part # RP30156. This fits the rail kit of your 2016 Ford F-350 and will fit your Pro Series slider fifth wheel hitch as well. view full answer...
While we only carry the Blue Ox SwayPro Weight Distribution w/ Sway Control # BXW1500, the only difference between the # BXW1500 and the BXW1500-S is the shank that is included. The # BXW1500 comes with the Blue Ox SwayPro Weight Distribution Shank # BXW4000 (vertical adjustment of 8-3/4"), while the BXW1500-S comes with the Blue Ox SwayPro Weight Distribution Shank # BXW4002 (vertical adjustment of 11-1/4").
If you are needing the additional drop that the BXW1500-S provides you can just... view full answer...
I haven't heard of any valve stem shims or sleeves to help give more support, but we do have some alternative pressure sensor options depending on what brand TPMS you're currently using.
For example, TST has the Internal Tire Sensor # TST-507-INT-S1 that installs inside the tire by wrapping around the wheel so you don't have to worry about the structural integrity of the valve stem with the flow-through sensor being installed on it.
If you let me know what brand TPMS you have on your... view full answer...
You will need to use the Adapter Rails # C88KR with the Curt Above-Bed Gooseneck Trailer Hitch for Fifth Wheel Rails # 16055 on your 2022 Ford F-350 to get a offset gooseneck ball. The factory gooseneck mount is a round hole with no locking pins that will secure a traditional offset ball in place. The Curt adapter and hitch will give you a 3" offset to move the trailer further from the back of your truck.
Do note that with both the 2-1/2" tall adapter and 1-1/2" hitch ball the base of... view full answer...
There is another solution, but unfortunately there is not a manual to electric conversion kit for the HappiJac 4160. You would need to upgrade your jacks to the HappiJac Electric Truck Camper Jack System # LC736514-ELKIT. The Manual-to-Electric Conversion Kit for HappiJac Truck Camper Jack Systems # LC733960-182524 is only available for the 4220 and 4820 jacks. There is a strong likelihood the jack would fail if used on a different jack/model.
The reason it will not work for your 4160... view full answer...
Yes the Fastway Universal Coupler Lock # FA86-0015-309 are going to be keyed alike. This will be keyed to the Fastway Key # FA-KEY-309 if you ever lose your keys or want to have additional keys. view full answer...
The tire of the part # TTWA16RGWMHD can be removed and reinstalled on a 16 inch diameter wheel that is 6-7-1/2 inches wide. Or, if you only need the tire you could just order the part # TTWPRG235R16. view full answer...
I do have a SeaSucker option that woks with round crossbars. The SeaSucker Monkey Bars Roof Rack - Round Bars - Vacuum Cup Mount - 48" Long, part # 298-SX6000B, is your only option because the SeaSucker crossbars measure 1-1/4" in diameter and the Yakima crossbar measures 1-1/8". You cannot interchange the crossbars. Unfortunately, we do not have an option to purchase a pair of SeaSucker vacuum cupps with only one crossbar.
I have included a product description link and a video review... view full answer...
Yes, the Furrion Chill HE Air Conditioner does come in black; all you need is the following:
- Furrion Chill HE RV Air Conditioner System - Single Zone - 15,000 Btu - Black # FR23PV view full answer...
There is not a "smaller" version of the The TorkLift SuperHitch, but the # TLF1008-30 actually has the 20000-lb standard towing capacity that you mentioned. When you use the TorkLift SuperHitch Everest Weight Distribution system # TLWD1000 the capacity of the hitch is up to 30000-lbs. The SuperHitch has both a 2" and 2-1/2" hitch receiver and the highest capacity we carry for a frame mounted hitch. view full answer...
The Single Axle Jeep Style Trailer Fender # HP99VR is going to be the closest fender we have to your dimensions. This fender is 24" long x 8" wide x 8" tall. It is constructed of 16 gauge cold rolled steel as well. view full answer...
Hello, yes, we have two great options for you in the B&W Companion OEM 5th-Wheel Hitch for Ford Super Duty Prep Package. There is the 20,000 lbs. option in # BWRVK3300 or, the 25,000 lbs. # BWRVK3305. Both are confirmed fit for your 2020 Ford F-350 Super Duty 8' bed with OEM Prep Package.
You may also be interested in the B&W 5th Wheel Lifting Device for Companion and Patriot Hitches # BWRVXA3130. This lets you lift your B&W 5th-wheel hitch from your truck bed with a hoist. 5th-Wheel... view full answer...
Yes, we have that available with the Reese Quick-Install Custom Bracket Kit for 5th Wheel Trailer Hitches # RP50074. These custom brackets reduce the amount of drilling and time required to install your fifth-wheel trailer hitch. Hardware included (base rails sold separately # RP58058). Please note the attached installation and product review videos. view full answer...