That is an interesting question, Bill. I will stary by saying that we sell a lot of RV and camper covers in all shapes and sizes, and we very rarely hear complaints of excessive mold or mildew buildup. Making sure the camper is completely dry when you install the cover, and making sure the cover is properly secured will help a lot to reduce the risk of mildew.
A lot of the newer covers, including the Camco UltraGuard Slide-In Camper Cover # CAM45773 that you were looking at, have built... view full answer...
Hey Scott, yes the Dexter Hub/Drum part # 8-201-5UC3-EZ will fit over Dexter 12 inch never adjust brake assemblies. The studs would be right at 2 inches in length view full answer...
That's a great question Mike and I have an interesting answer. There actually isn't any specific weight capacity for the HappiJac Truck-Mounted Camper Tie-Downs item # LC182910-182971.
These are designed to handle the weight of any truck bed camper, and that's true of any camper tie-down, which is why there isn't a designated weight rating. If a camper can fit inside the bed of your F-350, the HappiJac tie-downs will safely hold it in place.
The only other thing you will need with these... view full answer...
The EcoHitch Hidden Front Mount Trailer Hitch Receiver # 306-X7904 is currently the only front receiver for your 2021 Ford F-350 Dually. This receiver will sit inside the bumper rather than below the bumper like the Curt or Draw-Tite hitches so you will want to account for the height difference for your canoe.
I recommend the Rhino-Rack T-Load Hitch Mounted Load Assist and Support Bar # RTL002 for supporting the front of the canoe. It telescopes vertically from 42" to 64" tall and can... view full answer...
I sure can; the correct fit for air bags on your 2020 Ford F-350 Super Duty Tremor are going to depend on if it is 2WD, 4WD, and if you have single rear wheels or dual rear wheels. The options are as follows:
- 2-Wheel Drive - Single or Dual Rear Wheels: Air Lift LoadLifter 5000 Air Helper Springs # AL57391
- 4-Wheel Drive - Single Rear Wheels: Air Lift LoadLifter 5000 Air Helper Springs # AL23FJ
- 4-Wheel Drive - Dual Rear Wheels: Air Lift LoadLifter 5000 Air Helper Springs # AL76KV
During... view full answer...
Thanks for double checking with us, Pedro! It's always worth asking, especially when spending this kind of money.
Yes, the Curt Custom Fifth Wheel Installation Kit # C79BR will fit just fine with your 2022 Ford F-350 Dually and be compatible with the Curt Q20 # C16130 you're interested in.
I also recommend checking out the Curt 5th Wheel/Gooseneck Custom Wiring Harness # C57010 which gives you a 7-Way socket in your truck bed so you won't be stretching the 5th wheel wiring down to your bumper. view full answer...
Thanks for reaching out, James!
We can definitely get your RetraxPRO MX Hard Tonneau Cover # RT80384 switched over to the XR rails - all you need are the Replacement Side Rails # RTX66QR and you'll be good to go! No need to swap out the entire tonneau cover.
If you're planning on using the XR rails for a ladder rack then I highly recommend checking out the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack w/ Tonneau Cover Adapters # Y01151-5855. This is hands-down my favorite ladder... view full answer...
Honestly because your kayaks are so heavy, you're not going to be able to use a standard roof kayak carrier because you'd be overloading your bars.
If by "rack on the truck" you're talking about a ladder rack like # TH27000XTB then you can just use 2 of the Malone Foam Kayak Block for Truck Racks - 14" Long # MPG159 with the tie downs # MPG306 - or 2 of the Rhino-Rack Nautic 580 Side Loading Kayak Roof Rack w/ Tie-Downs # RR580.
If you don't have a ladder rack, then you could use a cantilever... view full answer...
Thanks for reaching out, Bill!
I definitely see your concerns about the TorkLift StableLoad Suspension Upgrade w Quick-Disconnect # TL89CR for your 2022 Ford F-350, but I hopefully I'll be able to put your mind at ease even though we don't currently have an installation video.
This kit is the same as the TorkLift part A7312S (we have to change our part numbers) which is why you're having trouble cross-referencing it, and the 2 drill bits and the template are used to make a 1/8" dimple... view full answer...
Hi Mark,
We can definitely get your 2023 Ford F-350 set up to be flat towed behind your motorhome, and I'll go ahead and list out all the parts needed for you to make it easy to order.
- Base Plate Kit: Demco Classic Base Plate Kit # DM68FR
- Tow Bar: Demco Excali-Bar III Non-Binding Tow Bar # DM9511013
- Wiring Kit: Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267
- Supplemental Braking System - Motorhome with HYDRAULIC BRAKES: Demco SBS Stay-IN-Play DUO Supplemental... view full answer...
Hey John,
Since body lifts only move the body away from the frame and don't change the distance between the frame and suspension the lift should be irrelevant to fitment in your case. For anti-sway bars I recommend the Roadmaster Front Anti-Sway Bar # RM-1139-180 and Rear # RM93VR. For the # RM93VR to fit you'll need the forward leaf spring bump pads, on either side, to be bolted to the frame and not riveted. For DRW models you'll want the # RM-1139-193 instead of the # RM93VR.
As for... view full answer...
For front and rear air bags that are compatible with your 4" lift and the B&W # BWGNRK1108 I definitely recommend going with Firestone. They are the most reliable and have the best construction by far. You will need the following:
-Firestone Ride-Rite Air Helper Springs - Rear # F2550 w/ Lift Spacers for Vehicles w/ 4" Lift # F2371
-Firestone Ride-Rite Air Helper Springs - Front # F2223 w/ Lift Spacers for Vehicles w/ 4" Lift # F2370
Make sure you pay attention to the spacers during... view full answer...
When installing the Redline Weatherstrip Tape # WS1434 on your Pace American Car Trailer, you'll want to install it at the top around your ramp door.
So this would be the top of the door towards the back, as you describe it. view full answer...
We can get your 2020 Ford F-350 FX4 with single rear wheels and 4WD set up with exactly what you want, which are air bags and a wireless compressor system. The air bags that fit your truck are from Air Lift, and are the following part number:
- Air Lift LoadLifter 5000 Air Helper Springs # AL23FJ
The # AL23FJ will absolutely help with the squat you are experiencing when you are towing, and really high-quality like you are looking for. Also, to avoid any leaks when installing the air bags... view full answer...
Since your trailer has three 8k axles the complete Roadmaster Comfort Ride system you would need is the part # RM-2460-2580-3 which is compatible with the MORryde X-Factor crossbeams like part # MR33WR. Since the X Factor would only be able to fit on the outside hangers you'd want to run two of them. One at the front of the suspension and one at the rear. view full answer...
The Curt Q24 5th Wheel Trailer Hitch w/ Slider for Ford Towing Prep Package # C16545-16020 is 20-1/2" in length x 32-1/2" in width. The handle points directly up so you won't have to worry about it protruding out towards the auxiliary fuel tank.
The B&W Companion OEM 5th Wheel Trailer Hitch w Slider for Ford Towing Prep Package # BWRVK3370 is 34-3/4" wide x 45" in length. The handles on this hitch also do not protrude past the base of the hitch. view full answer...
We can definitely get you set up with a wireless compressor to pair with the Air Lift LoadLifter 5000 Ultimate Air Helper Springs with Internal Jounce Bumpers # AL35FJ.
Going with a wireless compressor is a really smart idea because of how much easier it is to monitor and maintain the air pressure, and the best option for this is the WirelessAIR:
- Air Lift WirelessAIR Compressor System for Air Helper Springs # AL74000
The # AL74000 comes with a remote control, but also gives you the... view full answer...
Hi Robin; unfortunately not. The issue is the hole spacing on the shank for the Continuum is 1-1/2 inches, which is more than the 1-1/4 inch spacing on the majority of other shanks, including this Equal-i-zer. view full answer...
If you are planning to use a Air Tank # F9126 with your Air Lift WirelessAIR Compressor System # AL74000EZ you will need some fittings and air line to get a gauge installed.
Between the compressor and manifold on the Air Lift WirelessAIR you will need to install a Air Lift Union Tee # AL21838 so that the air tank will be filled by the compressor directly. From there some Air Lift 1/4" Synflex Air Line # AL73RV will attach from the compressor to the air tank with a 1/4" Elbow # AL21837.... view full answer...