We've heard of this from Ram owners as well, so the Curt 7-Way to RV Socket LED Circuit Tester - Vehicle End # C66NR won't be detected as a trailer being connected on your Ford. Our customers have success with the Pollak 7-Way to RV Socket LED Circuit Tester - Vehicle End # PK12741 so I recommend going that route. view full answer...
Yes, there are a couple of ways to make a Curt A20 work in the Ford factory puck system. The easiest way is to use the Curt A20 5th Wheel Trailer Hitch item # C16034. This 5th wheel hitch comes with the legs that mount inside the Ford puck system.
If you already have the Curt A20 item # C16140 you were looking at, you can add the Curt OEM 5th-Wheel Hitch Legs item # C16017 or just use the Adapter Rails item # C88KR. Both options will work and not reduce the capacity. view full answer...
Some late-model 5th wheel trailers do have a tapered front that provides better turning clearance for towing with a short bed truck. Some very-short-bed pickups with a 5-1/2-foot bed would potentially still need a sliding hitch - even with a tapered-nose trailer. For a standard non-tapered trailer your pickup would definitely require a slider hitch such as the Demco Hijacker Autoslide # DM8550038.
But for your 6-3/4-foot-bed F-350 the B&W Companion # BWRVK3300 fixed hitch will ensure you... view full answer...
The Pullrite 2900 is designed for industry standard 5th wheel rails. That means that the adapter part # RP30156 would be all that you would need to install the hitch in the bed of your 2017 Ford F-350 with the hitch prep package.
This adapter fits the rail package of your truck bed and gives you the needed rails to install a fifth wheel hitch. view full answer...
Yes, the Air Lift LoadLifter 5000 Ultimate Plus Air Springs # AL89398 are compatible with the Reese Elite under bed rail system on your 2008 Ford F-350 dually. The air springs you found are the ones I prefer to recommend as it has the internal jounce bumper and uses stainless steel air lines, roll plates and hardware.
I recommend the Air Lift WirelessAIR Compressor System # AL74000EZ be used with the air springs. This will allow you to wirelessly adjust the air pressure in each bag from... view full answer...
For a Curt PowerRide that fits the OEM pucks of your 2021 Ford F-350 and the year range you mentioned you'd need the leg kit part # C25JR with the head part # C56WR and you'd be set with everything needed. I don't have a good reason why we don't have this as a kit though. It's probably getting put together at this point. view full answer...
The 2 gallon tank that comes with the Air Lift QuickShot Compressor System for Air Springs # AL25690 has a 6" diameter and is 17" long. The brackets that you use to mount it add about 2-1/2" of height so we are looking for a space that can handle 8-1/2" High x 6" Wide x 17" Long for the tank assembly. view full answer...
When it comes to installing a front mount hitch on your 2022 Ford F-350 Super Duty The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2 inch # C31078 will work. This hitch has an easy, bolt-on installation with no welding required. The hitch has a line pull up to 9,000 pounds and has a gross trailer weight up to 5,000 pounds. Per the instructions you can put the hitch into the lowered position or the raised position, so you will not have any clearance issues.
I attached the installation... view full answer...
The Custom Third Brake Light Camera # 3460002 uses the supplied toggle switch as a power input to signal the module for switching to the optional 3rd brake light camera. To use one of the factory auxiliary switches on your 2021 Ford F-350 you will simply need to wire your auxiliary switch in place of the included toggle switch. If you already have power routed to the hot side of the switch, you will only need to connect the black wire from the cold side of the toggle switch. view full answer...
The part you are looking for is # TX5791-RightRail. This will be the correct right side rail for the Truxedo Lo-Pro on your 2018 Ford F-350 with the 6.5' bed. view full answer...
Ultra-Fab Economy 5th Wheel King Pin Tripod Stabilizer # UF19-950500 should be used to supplement the existing leveling system on a trailer whether it is manual or automatic. What you would do is operate the leveling system on the trailer like you normally would and then use the tri-pod stabilizer for additional support.
Customers with trailers that have living quarters in the overhang have stated that the tri-pod stabilizers have made things, well, more stable! view full answer...
So to answer your first question, there is not a switch that surface mounts, but there is a better MPPT solar controller you can get to replace your current one. The right solar controller depends on how much power you end up wanting, but a great option is the Go Power MPPT Solar Charge Controller # GP72RR.
The # GP72RR is for up to two battery banks, 100V solar panel input (which is more than 3 times as much as your current controller), works with all battery types, and has a remote option... view full answer...
It certainly is possible to pull and turn a fifth wheel with a transfer tank in the bed of your truck. The main concern is clearance on sharp turns. I do not know the width of your toolbox/fuel tank combo so you will have to do some measuring to know with certainty that they will fit together. I recommend placing your 5th wheel hitch in the bed of your truck and measuring from the cab side of your hitch to the cab of your truck to ensure you have enough clearance for your tank. Generally... view full answer...
Yes, the Bulldog Hitch Receiver Lock part # BD580412 is a locking hitch pin that will fit the 3" trailer hitch receiver on your 2017 Ford F-350. This hitch pin has a dual self-locking design with a flush look. It is constructed of stainless steel and is 5/8" in diameter. The included dust cap will help keep the lock core free of dirt and debris.
This is currently the only locking hitch pin we offer that will fit a 3" trailer hitch receiver for the exception of the Weigh Safe Hitch Receiver... view full answer...
With the MB Sturgis Sturgi-Stay T-Fitting w/ Hoses for POL Valve, # 103539-MBS no additional regulator is needed, it has all you need with it. view full answer...
The Weigh Safe 2-Ball Mount w/ Built-In Scale - 2 inch Hitch - 6 inch Drop, 7 inch Rise - 12.5K WS6-2 will have the towing capacity that you will need. This 2 ball system comes with one 2 inch ball rated for 8,000 pounds, and one 2-5/16 inch hitch ball rated for 12,500 pounds, and has a tongue weight of 1,500 pounds. The hitch balls are stainless steel and are corrosion resistant. Per Weigh Safe there shanks were previously rated for 10,000 pounds but later on learned that they could tow... view full answer...
The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F35FV you were looking at are a perfect fit for your 2019 Ford F-350 4x4 with single rear wheel and the 8 foot bed. The Firestone Ride-Rite Air Helper Springs - Double Convoluted - Rear Axle # F35FV are also compatible with an in-bed hitch if you may ever need to add one.
If you're looking for a way to keep the air bags filled without having to stop at the gas station whenever you need some added support, you... view full answer...
To upgrade to the Firestone Red-Label Ride-Rite kit for your 2012 Ford F-350 you'll have to get an entirely different kit as the 5,000 lb system, part # F2597, doesn't have as robust mounting brackets. For the full Red-Label kit you need the following:
- Firestone Ride-Rite Red Label Extreme Duty Air Helper Springs # F2703
The mounting brackets look similar for both kits but they have different parts numbers so you need to use the newer brackets. The other thing about upgrading is you'll... view full answer...
To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture).
If you don't see these in your bed then you do not have a OEM prep package and would need to install the Reese Under-Bed Gooseneck Trailer Hitch w/ Custom Installation Kit # RP39FR.
This hitch will give you the four attachment points you need for the B&W Companion OEM 5th Wheel... view full answer...
Go To Results