The Longview tow mirrors part # LVT-2300-C do fit the chrome mirrors of your 2017 Ford F-150. I attached a picture we received from a customer with the same chrome mirrors as you with these tow mirrors installed that I attached to this page.
I also attached a link to a review video for these mirrors on a similar truck that shows how they install. view full answer...
Yes the SumoSprings part # SSR-117-47 would do a great job leveling the rear suspension of your 2018 Ford F-150 when towing your travel trailer. view full answer...
Every flat-towed vehicle requires the same 5 components: base plates, a tow bar, safety cables, wiring, and a braking system.
For your 2014 F-150 STX I suggest the Roadmaster Crossbar-Style Base Plate Kit with removable arems, # 495-1A. These crossbar-style hidden brackets attach to your Ford F-150's frame to provide attachment points for your tow bar. The visible portions of the brackets can be removed when you are not towing. The square drawbars, or front arms, on the crossbar-style... view full answer...
The Fold-Down Gooseneck Trailer Hitch with Installation Kit - Ford F-150 # 8339-4437 you were looking at includes all of the components required to get it installed in the bed of your 2014 Ford F-150 XL.
This hitch is rated to match the towing capacity of your truck, so you will need to make sure your has a high enough towing capacity for the weight of your gooseneck trailer and 6-8 horses.
You can confirm your towing capacity by checking the towing section of your trucks owner's manual,... view full answer...
Both the TorkLift # TLA7310S Stainless StableLoad and the RAS # RAS3611-Y would absolutely help with the body roll in turns, porpoising and sway caused by crosswinds. Both systems are very highly rated by our customers.
I'd agree that air helper springs work best on loads carried in the truck bed.
Although I don't have head to head testing to provide you with, I'd recommend going with the StableLoad. The system can be easily engaged and disengaged using a ratchet and extension. The system... view full answer...
I called my contact at Camco and asked about a hose with the correct fittings that will work for you.
If the fitting on your 150-gallon tank is the same size as the fitting found on your 5-lb portable tanks, then the hose I recommend for you is part # CAM59043. This is a 12-ft long hose with a 1-inch female adapter on one end and a 1-inch male adapter on the other.
For a similar hose assembly but 5-ft long the hose you want is part # CAM59045 view full answer...
Sounds like you have a 1 inch body lift on your truck. If this is the case our Air Lift kit part # AL57200 would fit without needing a lift spacer. If you happened to have a suspension lift you most likely would not need a spacer block either. Air Lift actually does not make a spacer block in a 1 inch increment anyway.
In general with suspension lifts you have to use a spacer block since the distance between the frame and axle is increased. Since body lifts don't add anything there spacer... view full answer...
The Derale cooler part # D13503 is a fit for your 2007 Ford F-150. This cooler is very universal in what it can fit and your Ford truck would work well with it. For the quick install fittings the part # D13025 would be what you need if you have 5/8"-1/8 lines or part # D13024 for 1/2-20 fittings. view full answer...
The proportional is with out a doubt the way to go. It provides better braking performance in all ways compared to the older time delayed technology. It will apply the brakes proportionally or similar to what the vehicle is doing. During emergency braking it applies them quite quickly in a normal stop they are more gentle and will stop applying them at stops.
A time delayed controller applies the brakes the same every time regardless of the situation. this can lead to not enough braking... view full answer...
In order to carry a gas scooter on the front of a 2019 Ford F-150 you'll need to start with a front mount hitch, the Curt Front Mount Trailer Hitch Receiver part # C31083 is a great option. Then, in order to secure the scooter I recommend using the etrailer Motorcycle Carrier part # e98873 which is an all around great affordable option which can be adapted to fit any scooter. view full answer...
The brake controller install port you found under the dash of your 2007 Ford F-150 is active and will be used to install a brake controller like the Brake EVN part # TK63VR with an install harness like the # 3035-P. You will need to install a 4-way kit like the # C56031 and then convert it to a 7-way with the part # 37185 and make a few connections from it to the wiring that's at the rear of your truck frame.
If you check out the help article I attached to this page you'll see how to... view full answer...
Yakima has a roof rack option that will fit models of the 2017 Ford F-150 that have the panoramic roof. Keep in mind though they state not to open a sunroof or panoramic roof because they may interfere with some accessories.
If you have a Super Crew Cab or SuperCab you can use bars # Y00426, BaseLine towers # Y28TR, and 2 sets of clips # Y06122. There isn't an option for the regular cab (if the panoramic roof was even an option for the regular cab models).
A popular kayak carrier that... view full answer...
Yes, the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS4622 is confirmed to fit and will work well on your 2000 Ford F-150 Harley Davidson Edition. These feature a 2,000 pound capacity and will convert the truck's leaf springs into a mechanically active suspension system. No drilling is required for installation.
I have attached a short video demonstration on this system along with the written installation instructions that you can check out as well. view full answer...
It's harder to say for sure if you'd need longer chains, but most likely if you are using all 9 links of your current chains you'd have to go with a longer chain like the # 58364 that you referenced. The stiffer spring bars will require more links than what you currently have as you won't have to engage them quite as much most likely so it really depends on how many links you are currently using. That said, it's also really almost impossible to say how many links you end up using. view full answer...
Draw Tite does have a front hitch that fits your 2010 Ford F-150 and it's the part # 65061, but the part # 65025 that you referenced does not fit and would not work for you application.
Then for a plow we have the Detail K2 Avalanche part # K2AVAL8219 which would work great. It's an 82 inch wide blade that comes with a winch to make raising and lowering the blade easy when you are view full answer...
The best trailer hitch we have for your 2018 Ford F-150 to pull your Palomino PaloMini Palomini 181 is the Curt Trailer Hitch Receiver part # C86HR. This hitch is a custom fit that installs using pre drilled holes in the frame rail. It has a class III rating with a 2" receiver tube opening. As you can see in the attached install video it is very easy to install taking on average just 50 minutes. view full answer...
If you are interested in the very best weight distribution system on the market then look no further than the Reese Strait-Line Weight Distribution System. The Strait-Line has a four point sway control system which will reduce and prevent trailer sway better than any other system. It also comes with a lifetime warranty so it will be the last weight distribution system you have to purchase.
In order to make sure you get the correct one for your trailer you will need to calculate total... view full answer...
The Curt Universal Fifth Wheel Base Rails with Installation Kit part # C16100 has rails which are exactly 43" long end to end. The kit also comes with frame brackets which should allow you to secure the base rails to the trucks frame rails but if not then custom ones will need to be fabricated.
According to the measurements you have provided, you will need a 5th wheel hitch that can adjust to 18" tall. For this, I recommend the Reese 5th Wheel Trailer Hitch part # RP30033 which has height... view full answer...
The LED Work Light # UCL24CFB that you referenced wires in pretty easily. The red wire gets 12 volts positive and the black wire goes to a ground and it will light up. You'd want to use a switch like the part # D16740 so that you can switch it off and on as needed. Basically you'd need to wire the switch inline with either the power or ground wire and you'd be set. view full answer...
Wiring harness # C56515 is primarily for GM vehicles and will not fit a Ford truck. If you already have a 4-Way and need to have a 5-Way then the simplest solution is to use # 20036. All you have to do to get the 5th reverse function is to tap into the reverse light wire behind one of the reverse lights. The 4-Way will just plug in. I have linked a video to the right showing a typical installation for you. view full answer...
Go To Results