I spoke with my contact at Yakima and if you have the Yakima SwingDaddy 4-Bike Rack you need the Replacement Swing Arm Assembly, # Y8890312. The bolt is not sold separately. view full answer...
If you are referring to the removable attachment tabs then, yes, we do have that part. You will want part # BLU57XR. I have included a link to a video review of this part for you.
If this is not the part you need then I have included a link to the installation instructions for Blue Ox base plates # BX2605. There is a parts break down that you can use to identify the part needed. view full answer...
The replacement 4-Way trailer connectors for the 2001 Ford Escape with Factory tow package that we carry have square connectors, # C55255. If you follow your 4-Way wiring forward on the vehicle and it does have a square connector then you can use either of these replacements. If it does not then the only option would be to either splice in a new 4-Way using # 18252 or replace the whole harness using # 118343. view full answer...
The Hidden Hitch part # 87626 has replaced the 87585 that you currently have. I checked to confirm this with Hidden Hitch.
In order to get the correct install hardware you would need part # RHK. On the product page you would need to enter the part number of 87585 and we will ship you out the correct hardware. Even though we no longer carry the hitch you have we still have access to the hardware list for it so we know what you would need. view full answer...
It sounds like you have a Swagman Original bike rack. We have the replacement cradle padding # P0023 which fits 1999 models and newer. This is the only gray cradle padding available that fits bike racks like what you have described so even if it is not exactly the same you may be able to still use it by modifying it somehow so you won't have to purchase a new rack just yet! view full answer...
We can help you with replacement hitch installation hardware for your Draw-Tite # 75758 Class III hitch. All you need to do is enter the part # RHK into our search box and then enter the part number 75758 and select Draw-Tite from the drop-down menu.
It is important to use new hardware when you re-install a hitch on a different vehicle as this type of hardware is intended for a single use.
For reference I have linked two helpful articles and a video to assist you with your installation.
Note... view full answer...
The Replacement Hardware Kit # RHK will give you the hardware you need for the etrailer Trailer Hitch Receiver # e56AR on your 2008 Ford Escape. When ordering the kit you will need to include the hitch manufacturer and hitch number to ensure you receive the correct hardware for your receiver.
If you are installing this on a different vehicle than the original we also have the T-One Vehicle Wiring Harness # 118551 to give you a 4-way flat connector. view full answer...
The hardware pictured on the Replacement Hardware Kit for Trailer Hitches # RHK is for a specific hitch. When you go to that product page, you need to type in your hitch number and select the manufacturer from the drop down menu. We will make the kit for your specific hitch and send it to you, so you will have all the hardware for your unique trailer hitch receiver. view full answer...
It is always recommended to replace all of the mounting hardware when re-installing a trailer hitch.
The Draw-Tite # 75758 is confirmed as a fit for the 2017 Escape.
To order new hardware for the hitch you just need to go to # RHK. Then enter the hitch number in the appropriate box and choose Draw-Tite from the drop down menu. Add that to your cart and the kit will be assembled for you. view full answer...
If you can determine what hitch model and brand you have we can set you up with everything you would need.
With that info you could go to the product page for part # RHK, select your hitch manufacturer, and then enter the part number for the hitch and we will send you out the correct hardware. view full answer...
When it comes to a roof vent lid, the most common size is going to be 14 x 14. I have included a link to these for you. To ensure that you get the correct lid for your roof vent, I recommend taking another quick measurement of the outside dimension of the vent that extends through the roof of the trailer and also look for any name or model number on the vent housing.
Unfortunately a collective OEM trailer parts catalog does not exist and with the original Pace company going out of business... view full answer...
Yes they are. For replacement 7/16 inch fishwire bolt leaders you would want the part # C58410.
Hitch install hardware is considered one time use, so you would also want the part # RHK. You would just need to select the hitch manufacturer and part number and we will send you out the correct hardware. Bolt leaders would be included. view full answer...
The brackets you will need for your CE Smith Single Axle Trailer Fenders w/ Top and Side Steps - Gray Plastic - 12" Wheels - Qty 2 # CE19502-2 will be the CE Smith Galvanized Steel Step for Trailer Fender - 15-1/4" Long x 3" Wide - Qty 1 # CE26212G. You will need U-Bolts, like the # CE15284GA, to attach the brackets to the frame, but you should be able to reuse the rest of the hardware you currently have. view full answer...
The Reese Hitch 44680 is the same as the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75751 which is a fit for a 2012 Ford Escape. We can offer you replacement hardware using the Replacement Hardware Kit part # RHK which you will need to enter info from the Draw-Tite hitch for to receive the correct parts. view full answer...
We don't have replacement lock cylinders with the number 2818 but you can replace your cylinder with any of the Thule cylinders on our site. You will need the cylinder # THLOCKN168, the matching key # THKEYN168 (I recommend getting at least 2 of these), and the Universal Change Key # 853-1251 to install the cylinder.
If your box has 2 cylinders then you can either get 2 of the lock cylinders or simply order part # TH450200 which comes with 2 cylinders, 2 keys, and the change key. view full answer...
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13067 will use 1/2 inch 13 x 1-1/2 inch and 1/2 inch 13 x 1-3/4 inch carriage bolts. If you want the complete factory hardware kit use Replacement Hardware Kit for Trailer Hitches # RHK. view full answer...
The replacement 7-way connector I recommend for your 2012 Escape is part # A10-7072VP.
This connector just plugs into the OEM plug at the rear of your Escape. This 7-way has the spring-loaded dust cover to help protect the connector from the elements.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion. view full answer...
Yes. You can purchase the hardware using part # RHK. You simply enter the manufacturer and the hitch part number and we will ship the hardware kit that comes with that hitch receiver.
The 2014 Ford Escape Class II hitch receiver options:
Curt # C12111
Draw-Tite # 36524
Draw-Tite # 36529 view full answer...
I'd be happy to help with that. I'd recommend the # A10-7072VP along with the # PK12711U mounting bracket.
You'd simply unplug the existing 7-way from the harness that plugs into it, and replace with the # A10-7072VP. view full answer...
Go To Results