Since the Kuat Transfer V2 Bike Rack # KU64FR can handle up to a 60 lb bike with a max wheelbase of 50" and since your Santa Cruz falls within these specs (even though the wheelbase is at max) it will be a great option for you!
The Transfer V2 comes with a cable lock but if you want to lock the rack to your hitch receiver you'll also need the locking hitch pin part # HL1.
Attached is a review video of this rack for you to check out. view full answer...
While we do not know the exact height of the raised rails of your 2021 Ford Bronco Sport Badlands, there is a way to gain a strong approximation of whether the Yakima JetStream Crossbars - Black - 60" Long # Y00426 along with the TimberLine Towers for Yakima Crossbars # Y33TR allow you to open the sunroof on your vehicle.
From the bottom of your roof to the bottom of the JetStream crossbars is about 4 inches tall. In order to determine if you have enough room, I recommend opening your... view full answer...
The Replacement Tamperproof Wrench for Thule Ride-On Adapter, Bed-Rider, Flat Top, or Snowboard Carrier # 853-5270-02 you mention is not going to be compatible with the Thule SnowPack Ski and Snowboard Carrier - Locking # TH7326B.
This wrench is compatible with Thule Ride-On adapter, Bed-Rider, Flat Top, or the roof-mounted snowboard rack TH575, which is no longer available. view full answer...
I am sorry if we provided you with bad info here. I believe we made some assumptions about the Malone roof rack that were not accurate. The Hullavator # TH898 is made to work with a square bar roof rack, but it has to be the Thule brand. As you can see the Malone towers on the # MPG202 are shaped a bit differently from the Thule brand, and will not fit. The Hullavator will also work with any crossbar that sits on top of the tower, and has a top channel. Malone makes the Airflow2 # MAL84AR... view full answer...
The adjustable frame clamps on the Hollywood Racks Destination Bike Rack # HLY94FR allows for you to carry women's bikes or hybrid framed bikes without needing an adapter. The Frame clamp can be lowered to the clamp to the frame on both bikes. I have included an image showing both bike types loaded on this rack for you to see. view full answer...
We do have a Class III trailer hitch receiver as well as a trailer wiring harness for your 2021 Ford Bronco Sport, and you are on the money with the two parts that will fit, which are the following:
- Curt Trailer Hitch Receiver # C76HR
- T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # TK46FR
The wiring harness will store inside the rear hatch so you won't need any type of mounting bracket, and the Curt trailer hitch is a simple bolt-on installation; I have added a... view full answer...
For your 2022 Ford Bronco Sport, the etrailer Trailer Hitch Receiver # e57KR is a confirmed fit. This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver. The 2" receiver is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. It also has a nice matte black finish.
If you plan to do any towing, you can round out a tow package by adding the T-One Vehicle Wiring Harness # TK46FR... view full answer...
Yes, as long as you have a 2 inch hitch installed on your 2023 Ford Bronco Sport like the etrailer part # e57KR the Curt cargo carrier part # C18152 would fit and work great. view full answer...
There are no special procedures needed for towing your 2021 Ford Bronco Sport front wheel drive on a dolly. Per your owners manual you will need to simply follow the instructions given by the dolly manufacturer for loading and securing your Bronco to the dolly.
You can only tow your Bronco on a dolly like the Demco Kar Kaddy SS Tow Dolly # DM9713045 if it is front wheel drive only. If the Bronco you are getting is all wheel drive or 4 wheel drive you will have to use a car hauler trailer. view full answer...
Yes, the Rhino-Rack Pioneer Platform Rack # RR77AB includes the legs to fit the raised rails on your 2023 Ford Bronco Sport. This rack is 60" long and 49" wide and weighs 54lbs. view full answer...
Yes, we do have 4-way wiring that is confirmed to fit your 2023 Ford Bronco Sport.
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C47WR
This custom-fit T-connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. You will have to remove the tail light assemblies to access this harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to... view full answer...
Yes, you can use the new Thule SquareBar Evo Crossbars, part # TH712500, with your old Thule Crossroad footpack. The dimensions are the same, so the new bars will slide through that opening. The endcaps are different so you will need the Replacement Endcaps for Thule SquareBar Roof Racks - Qty 4, part # TH1500052968.
I have included product description links below. view full answer...
In order to use the Yakima LockNLoad Platform Rack for Crossbars part # Y05044-39 on a 2023 Ford Bronco Sport Badlands you'll want to use the Yakima JetStream Crossbar System composed of part # Y00426 and part # Y33TR. This will put the platform pretty close to the roof but there isn't really another option to move it closer with this size platform. The crossbar kits are all pretty much going to be around the same height.
There is an option to mount the platform directly to the side rails... view full answer...
There is indeed a trailer hitch receiver that fits your 2024 Ford Bronco Sport, from Curt, at the following part number:
- Curt Trailer Hitch Receiver # C76HR
I verified this fit directly with the manufacturer for you. view full answer...
The power wire ran to the battery with the T-One Vehicle Wiring Harness # TK46FR is what powers the module and sends power to the trailer. This module combines the separate turn signal/brake lights into the single wire used on trailer as well as reduces power strain put on the factory wiring. Since vehicle wiring has gotten thinner to save on costs you cannot pull enough power from the factory wiring so the powered converter provides the power sent to the lights on the trailer.
If you... view full answer...
The closest option we carry to fitting your BCI Group 48 battery would be the Kat's Heaters Thermal Battery Wrap # KH22100. It's going to be slightly longer than you need at 28" in total length but you can just overlap the end of the wrap a tiny bit to form it around your battery and keep it warm in cold temperatures. view full answer...
We do have a trailer hitch receiver that is a fit for the 2021 Ford Bronco Sport, and I verified with the manufacturer that the correct fit is the following:
- Curt Trailer Hitch Receiver # C76HR
The hitch is a complete bolt-on installation as well, so no drilling into your Bronco Sport's frame is needed. I have added a link below to the installation instructions for you to take a look at so you can see how simple the installation process really is.
The only other thing I wanted to mention... view full answer...
The absolute best trailer hitch for your 2024 Ford Bronco Sport is the etrailer Trailer Hitch Receiver # e57KR because of the matte black finish. This not only looks better, but is also more durable than the classic glossy black finish that we see on the other options available. I've actually had a few of our etrailer hitches installed on my personal vehicles and I've never been disappointed with them!
Then for wiring I really like the Curt T-Connector # C47WR because it tees in behind... view full answer...
For installing the Prodigy P3 part # 90195 in your 2021 Ford Bronco Sport with a 4-way the kit you need is the # ETBC7 which will adapt your 4-way to a both a 7-way and a 4-way and comes with everything needed to install the brake controller too. This does require hardwiring though as your vehicle does not come with brake controller pre-wiring. view full answer...
Go To Results