The only trailer hitch option for a 2014 Fiat 500 is a class I, the Curt Class I Receiver Hitch part # C11363. However, that does not mean you cannot carry your e-bike. It is true that some bike racks require a class II trailer hitch receiver but there would be nothing physically preventing you from using a class II bike rack with a class I trailer hitch, it is just not recommended. The receiver tube size is the exact same, 1-1/4" so there will be no fit issues.
If you are open to a different... view full answer...
That's a really good question, so I checked with Curt for you and verified there are no restrictions on their wiring harness, and it is absolutely compatible with your 2017 Fiat 500E; the harness that fits is the following:
- Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56174
So you can use this harness without any issue with your '17 Fiat 500E, and if you also need a trailer hitch for this vehicle, I went ahead and verified for you that Curt has a hitch... view full answer...
The brake controller I recommend for a 2020 Honda Pilot is the Curt Echo Wireless Trailer Brake Controller part # C51180. The Curt Echo is a wireless brake controller means you don't have to drill into your dash to mount it like you would for a traditional brake controller. The Curt Echo is controlled via an app on your mobile device that works in the background. Therefore, you also don't have to learn an entire new device either.
In order to use the Curt Echo you will need a 7-way trailer... view full answer...
First thing you will need to flat tow your 2013 Fiat 500 Pop is a base plate kit. For that you would want the Roadmaster EZ2 Base Plate kit part # 522013-1A.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon 2, # RM-520. For safety cables you can use # RM-643. The coiled design helps keep the cables off of the ground.
For lighting you can... view full answer...
For your 2013 Fiat 500 Abarth, I recommend the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 522013-1A for your base plates. This is a customized fit for your car and will work perfectly with the Roadmaster Falcon All Terrain, Non-Binding Tow Bar # RM-522. Then you will use safety cables # RM-643 and you may want the tow bar cover # RM-055-3 for storage when not connected to your Fiat.
For your tow bar to vehicle wiring, I recommend the Roadmaster Diode 7-Wire to 6-Wire... view full answer...
To flat tow your 2013 Fiat 500 you need a base plate kit, tow bar, safety cables, vehicle tow bar wiring, a supplemental braking system, and possibly a high-low adapter. Please note that the online manual for your Fiat 500 states that you can only flat tow your vehicle if it has a manual transmission. I recommend checking this and any additional instructions in your copy of the owner's manual.
The safety cables that I recommend using with the EZ2 Base Plate kit # 522013-1A and Falcon 2... view full answer...
We do not carry any engine components but we do have chassis components. It appears that you may be seeking a steering stabilizer by the question as we have the # RM-RBK4-RSSA fit guided only for the Class A with V8. I reached out to the manufacturer and the same stabilizer will be used for the V10 # RM-RSSA but the V10 will alternatively use the bracket kit # RM-RBK22. view full answer...
Yes, the Hollywood Racks Bike Rack part # HR1450Z that you referenced would work with 24 inch wheels so it should work well for you. I attached a review video for this rack for you to check out as well. view full answer...
We do not sell just the pin for the breakaway switch on the Blue Ox Patriot but we do have the breakaway switch which includes the pin you asked about.
The replacement breakaway switch is part # BRK2505. view full answer...
I have a solution for your hitch and bike rack needs on your 2015 Fiat 500.
Depending on which version of the Fiat 500 we have a hitch that will work for you. I recommend the Curt # C11347 if you have the Abarth style, but if you don't then the Curt # C11363 will be the correct fit for you.
The bike rack I recommend for you would be the Kuat Beta # B202-114. This 1-1/4 bike rack carries 2 bikes and is lightweight and will work with the 3-3/4 inches clearance you will need with your... view full answer...
It sounds like you are looking for a compressor you can use to inflate 16 inch tires to 65 psi. The Firestone Heavy Duty Air Compressor, part # F9499 is intended for suspension enhancement systems more than inflating tires. I recommend the Bulldog Compressor, part # BDW41000. The 12 volt compressor connects directly to the battery terminals via the included jumper-cable style clips. The compressor has a 150 psi capacity, so it'll inflate your 16 inch tires quickly. view full answer...
If nothing at all is working then the ground wire for your Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit # RM-15267 is likely the issue. I recommend checking that it's making a good connection to the frame of the vehicle and isn't starting to corrode. If that isn't the issue then you'll need to connect to the motorhome or another vehicle with a 7-way connector and then put on your light signal (you can just start with running lights) and then trace the wires back starting at the... view full answer...
I have attached a list of parts below that you will need to flat-tow your 2018 Fiat 500 Abarth. Please note, Demco does not make a set of base plates for this vehicle but you can still use your Demco Excali-Bar III Non-Binding Tow Bar part # DM9511013 with the adapter listed below.
Demco Tow Bar Adapter for Roadmaster Base Plates part # DM9523001
Roadmaster Crossbar-Style Base Plate Kit part # 522013-1A
Curt Towed-Vehicle RV Harness part # C58911
SMI Stay-IN-Play DUO Supplemental Braking... view full answer...
There is a way to carry bikes with your 2012 Fiat 500 convertible. What you can do is install a trailer hitch # C11363 (does not fit Abarth models) or for an Abarth model use # C11347.
Then you can use a Class I compatible bike rack such as the NEO2 # B01748. This rack holds the bikes at the wheels so it is compatible with many bike styles. And it weighs just 15 pounds so it is easy to handle. I have linked a video review of this rack for you. view full answer...
It sounds like you are wanting to flat-tow a 2012 Fiat 500 behind a motorhome and if that's the case you'll need a few different components such as base plate kit, tow bar, safety cables, wiring harness, and braking system. I have attached each of these components for you below.
Roadmaster Crossbar-Style Base Plate Kit part # 522013-1A
Roadmaster Falcon 2 Tow Bar part # RM-520
Roadmaster 64" Single Hook, Straight Safety Cables part # RM-645
Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil... view full answer...
Your Falcon tow bar will work with Roadmaster base plates # 522013-1A for the 2015 Fiat 500 Pop. Most Roadmaster tow bars use that crossbar you mentioned and it is still used for the new versions of the Falcon series.
The tow bar, assuming it is in good working order, will work well with your Fiat. No worries, it sounds like you have things under control!
If you do not have safety cables I recommend # RM-643. The coiled design helps keep the cables off of the ground. If you do not yet... view full answer...
I confirmed with Curt that their Class I Receiver Hitch # C11363 will fit on your 2017 Fiat 500e. This is a custom hitch designed to bolt onto your vehicle. Curt does require a support strap, # 18050, when carrying any non-trailer loads like a bike rack in order to be compliant with the hitch's warranty. view full answer...
The Solera Manual Pull Style to Power Awning Conversion Kit, Black # LC329251 will simply require changing the heads on your awning frame and then wiring the unit. I've attached the photo from the installation manual that specifies how to wire the awning. There are specifics, but the biggest aspect not included in the kit is the wire to the battery and ground. You will want # 12-2-1 sold by the foot for your wiring. I've also attached a link to the instructions to assist. view full answer...
For your 2014 Fiat 500e the Curt part # C11363 will work. We had a customer with a similar 500E come back and say it worked for them. This is a 1-1/4 inch hitch though since this smaller hitch size is what is seen on lighter duty vehicles like yours. view full answer...
Go To Results