Yes, the package contents for the Replacement Hardware Kit for Westin Sportsman Grille Guard # 40-120PK are as pictured. This kit will work to install the Westin Sportsman Grille Guard # 40-1205 that is a confirmed fit for your 2003 Dodge Ram Pickup.
Included are the Grille Guard installation instructions for additional information. view full answer...
Yes, the left and right hand assemblies of the kit part number # AKEBRK-10 are available as part numbers # AKEBRK-10R for the right hand side and part # AKEBRK-10L for the left hand side. The kit does not include anything beyond just the two assemblies so if you happen to catch our pricing algorithm offering them individually at a better price that's what I would recommend you go with! view full answer...
The Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch part 8550020 is the same as the Demco Hijacker Premier Series Double Pivot 5th Wheel Trailer Hitch part # DM6076P-21K but it also comes with the Universal Above-Bed Base Rails for Demco Premier Series 5th Wheel Trailer Hitches part # DM6071.
If you purchase the part 8550020 or the part # DM6076P-21K with the part # DM6071 then you will still need frame brackets. In order to recommend the correct set I would need to... view full answer...
Yes, the Replacement Cover for TruXedo Lo Pro Soft Roll-up Tonneau Covers like part # TX546601-CVR all have the hook and loop fasteners sewn in. view full answer...
I spoke to my contact at Edge and he informed me that the Edge CTS Insight part # EP84130 that has been confirmed to fit your 2014 Ram with an EcoDiesel will display the distance between regens and the DPF soot mass percentage, but it will not actually display when the vehicle is in regen. view full answer...
The bolts that come with the EcoHitch part # 306-X7284 that you referenced are:
(2) 7/16”-14 x 1” Gr.5 Hex Cap Screw
(2) M8-1.25 Hex Nut
(5) M8-1.25 x 50mm Hex Cap Screw Fully Threaded view full answer...
The size of the bolts that come with the Draw Tite hitch part # 75101 that you referenced are 1/2-13x1-3/4 Grade 5. You can order this hardware kit from us as part # RHK. view full answer...
The Westin Grate Step # 27-74735 requires mounting brackets depending on your model of vehicle. From the previous question you asked with us, it looks like you are asking for a 2500 model of 1998 Dodge Ram. If you have this model, I confirmed with Westin that the brackets you need are the Custom Installation Kit for Westin Molded, Sure-Grip, and Grate Step Running Boards # 27-1185. It is important to note that the Grate Step and the mounting brackets are only confirmed to fit Club Cab and... view full answer...
I spoke with my contact at Westin to be sure and he did say that the ends of the Platinum Series Oval Nerf Bars, # 24-54080, do have end caps. These particular bars are Westins commercial grade bars if you were to go by their application guide. view full answer...
All of the required hardware for installation of the Reese Custom 5th Wheel Installation Kit, # RP50140-58, is included. This is a bracket and rail kit combined so to see all of the hardware, look at the picture on the product page that we took of all the parts.
There are 4 u-bolts, 17 bolts of various sizes, 6 tube spacers, 17 block spacers, and numerous washers, nuts, and fishwires. You will not need any additional hardware to complete the installation on your 2007 Dodge Ram. view full answer...
The Dexter Trailer Hub and Drum Assembly # 84556UC3 is a single Hub and Drum assembly. We do not offer them sold in pairs, so you would need to purchase 2 individually if you're going to replace the parts on an entire axle. I've linked the installation video for this product to this answer.
You could also go with the # AKHD-550-35-K , which is a more economical Hub and Drum assembly. If you also need a brake recommendation for your trailer, the # AKEBRK-35L and # AKEBRK-35R is a great... view full answer...
Yes the Replacement Cover for TruXedo Lo Pro Soft Roll-up Tonneau Cover # TX546601-CVR that you referenced does have velcro on the bottom of the tarp. It also has velcro for the bows as well. view full answer...
The latch mechanism of the Gen-Y Pegasus Shock Absorbing Gooseneck Coupler # 325-GH-7007 that you referenced is the pin style and not the older auto-latch system that it used to have. view full answer...
On the replacement plastic dome assembly, # BVA0502-03, the foam gasket is included. I have included a picture showing it. The foam is not really a gasket, it is a strip of foam adhered to the dome. You can see in the picture where the two ends of the strip come together. The foam is not available by itself. view full answer...
The Putco # P84103 consists of the four grille inserts as shown in the provided photo but not the entire grille. The inserts would mount over the existing grillework. view full answer...
The Reese Ram OEM Fifth Wheel Adapter, # RP30154, includes the feet that insert into the pucks (factory slots) in the bed of your 2013 Ram 3500. You will not need to purchase any additional items with this adapter if your truck has the Dodge Ram OEM Fifth Wheel Prep Package.
This adapter allows you to use a standard fifth wheel hitch that uses the industry standard above-bed base rails with your Dodge OEM Fifth Wheel package. view full answer...
Yes, part # 75135 does include the mounting hardware. I have added a link below that will take you to the installation instructions so that you can view the included hardware. view full answer...
The Stromberg Carlson 100 Series 5th Wheel Tailgate with Open Design, # VGD-02-100, does come with all the parts needed for installation. You can see all of the hardware in the last picture on the product page, above the description.
This tail gate cannot be fitted with a lock. However, there is a model for your 2003 Dodge Ram that does come with a lock. The Stromberg Carlson 4000 Series 5th Wheel Louvered Tailgate with Lock, # VGD-02-4000, does have a lock and is made of glass-filled... view full answer...
The Equal-i-zer Weight Distribution System # EQ64FR that we sell will come with the Equal-i-zer part numbers 90-00-1600(hitch) and 91-00-6160(ball). We have combined them to ensure that the correct weight ball is always used to match the hitch capacity.
A 1-7/8" 12pt Thin Walled Socket # ALL643216 is needed to install the 2-5/16" hitch ball that comes with the Equal-i-zer hitch system. view full answer...