Expert Answers about Chrysler
- Can Back Only of 2009 Chrysler 300 Replacement Side Mirror be Purchased
- The replacement K-Source mirrors for your 2009 Chrysler 300, and all other vehicles for that matter, come as a complete unit and can't be pieced out. For your driver's side mirror you need part # KS60580C and for the passenger's side mirror you need part # KS60579C.
These mirrors has the electric and heat functions but those will only work if your current mirrors already have those functions.
view full answer... - Speed Rating and Replacement Recommendation for Duro 4.80-12 Trailer Tire
- I recommend going with an entirely different tire for your application. When I reached out to Duro about the speed rating the reply I got back was that their standard trailer tires have a max 60 mph speed rating.
For your trailer I recommend going with the Taskmaster listed below:
- Taskmaster 4.80R12 Radial Trailer Tire # TT48012C
This is a Load Range C (990 lbs at 90 psi) like what you currently have, but it's also rated for 81 mph so you can safely travel at normal highway speeds....
view full answer... - Replacement Installation Hardware for a Trailer Hitch on a 2013 Chrysler 200
- Yes you can get just the installation hardware for the trailer hitch for your 2013 Chrysler 200. You will need # RHK. Enter in the hitch number where indicated on that page then select the manufacturer of the hitch you have and the correct hardware kit will be assembled for you.
If you are not sure of the hitch you have I have included a link to all of the hitches for the 2013 Chrysler 200.
view full answer... - Is Replacement Hardware Available For The Draw-Tite Hitch 76046?
- We do indeed!
What you will need is our part number # RHK. All you will need to do is enter the hitch part number (76046 in your case) in the box above the "Add To Cart" button. This will then include all the bolts, washer, nuts, bolt leaders/fish wire, and spacer plates that would have come with the hitch originally.
view full answer... - Replacement 12x2 Free Backing Surge Brakes with Part 023-342-00
- Thank you for the photo!
Since your current drum brake assembly is part 023-342-00 from Dexter Axle the replacement brake kit for both sides of your axles is part # 23-342-343. You will need one kit for each axle on your trailer. These are free backing 12" x 2" brake assemblies from Dexter Axle.
Attached is a review video for you to check out as well.
view full answer... - Cabin Air Filter For 2008 Chrysler Pacifica
- I have confirmed that the # 3513038C Cabin Air Filter you'd looked at is indeed the correct replacement filter for your 2008 Chrysler Pacifica. The filter measures 9-1/4 inches wide, 12-1/4 inches long and 7/8 inches thick, as shown in the provided photo.
view full answer... - Can RV Entry Door Locking Latch and Cam Lock Cylinders Be Keyed Alike?
- Yes. The Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019 and the Replacement Cam Lock Cylinder for RVs - Keyed Alike Option # 295-000003 will all come keyed the same when you select keyed alike from both products within the same order.
view full answer... - Replacement Bolts For Draw-Tite Max-Frame Trailer Hitch Receiver
- The replacement hardware kit for the Draw-Tite Max-Frame Trailer Hitch Receiver # 75579 is under part number Item # RHK. This kit will include the bolts as well as all the other installation hardware.
If you type RHK in the search box on our website it will take you to the replacement hardware kit product page. You will then simply type the number of the hitch you need hardware for in the box that is labeled Hitch Item Number. You would enter part # 75579.
Next, select Draw-Tite from...
view full answer... - Replacement Threaded Hitch Pin and Lock for Yakima BackSwing 4
- The Yakima HitchLock for Yakima Hitch Mounted Bike Racks - Same Key System (SKS) # Y07235 is the lock you are seeking. It is designed to work with the Replacement Hitch Bolt, Nut and Clip for Yakima Bike Racks and DryDock Load Assist - 2" Hitches # Y8780022 which is a fit for your BackSwing 4.
view full answer... - Replacement Hardware Kit for Trailer Hitches
- We do have a replacement hardware kit for the Draw-Tite Hitch # 75119. You will need the Replacement Hardware Kit for Trailer Hitches # RHK.
Make sure that in the pull down menus (below the Shipping Special box) that you insert your hitch number, 75119, and the manufacturer of the hitch (Draw-Tite) so that you get the correct hardware kit.
Pricing is available once you input all the necessary information.
view full answer... - Replacement Lock Core Set for Karrite Voyager Cargo Box
- I believe you are looking for the Replacement Lock Core and Key for SportRack Explorer Cargo Box # SR03807. This isn't something that has the option to be keyed alike as they are all packaged individually so you may possibly need to use 2 keys depending on what is available.
If you have a different style of lock that you are needing please send me a picture of it and I can see if we have it available.
view full answer... - Replacement 4-way Connector for 2007 Chrysler Pacifica w/ Bad Converter Box
- Unfortunately the converter of the Curt # C55530 you have installed on your 2007 Chrysler Pacifica is not a replaceable part and the entire wire harness and would need to be replaced. This is unfortunately pretty common with 4-pole wire harnesses, which is why there's only a 1-year limited warranty.
view full answer... - Replacement Hardware for Trailer Hitch on 2012 Chrysler Town and Country
- The 1/2" Bolt # 337FCB050013200 will fit with the Trailer Hitch Spacer Block # RP3022, but if you're looking for replacement hardware for a trailer hitch that fits your 2012 Chrysler Town and Country, like the etrailer # e98854, then you actually need 10mm and 12mm bolts that have a hex fitting for the head instead of a rounded head like the 1/2" bolt you looked at.
For a complete replacement hardware set you can use part # RHK and then input your trailer hitch info and we can send you...
view full answer... - Replacement Trailer Jack for 2009 Coachman Pop Up Camper
- We have a variety of replacement trailer jacks to choose from and from that linked selection I recommend checking out the Round Swivel Marine Jack w/ Wheel # MJ-1500B.
This is a swivel jack rated for 1,500 lbs and has a bolt-on installation so it's something you can easily do at home with your own tools. This fits trailers with a frame height from 2" to 4" and offers 11" of travel for an extended height of 24" which should fit your needs just fine.
If you end up needing a different style...
view full answer... - Replacement Locks, Keys & Mounting Hardware for Karrite Voyager Rooftop Cargo Box
- Your Kar-Rite cargo box can use Replacement Locks and Keys Kit # SR03807 from SportRack.
Thank you for the photo of the box underside showing it's mounting straps. We have never seen a cargo box that used straps for attachment so I expect this was possibly a home-brew modification. We suggest using replacement mounting kit # TH04997.
If you need to drill new holes to match the new hardware you can use a silicone sealant like # LT37467 to seal up any extra openings in the bottom of the box.
view full answer... - Can Personal Water Craft Trailer Tires/Wheels Be Changed from Load Range B to Load Range C
- Changing your PWC trailer tires to a higher load rating will certainly give you some extra safety margin and may help reduce the tires' operating temperatures, which is always a good thing.
In your 4.80-12 size we offer pre-mounted tires/wheels in Load Range C in either a 4-on-4 bolt pattern or a 5-on-4-1/2 pattern. You can use the link provided to select Load Range C tires and your wheel bolt pattern.
For example, for a 4-on-4 white wheel and Load Range C bias ply tire you can use part...
view full answer... - Ground Clearance for Curt Trailer Hitch that Fits 2012 Chrysler Town and Country
- When we installed the Curt hitch # 13364 on a similar 2012 Chrysler Town and Country we found that from the ground to the bottom of the hitch is right at 9-1/2 inches.
view full answer... - Are Replacement Parts Available for the 9025 Thule Apex Bike Rack?
- I went through the instructions and replacement parts for a Thule 9025 Apex 4 bike rack, but I was unable to find a replacement nut or washer. However, I did find the bolts and wrenches that are direct replacements. The # 852-311-5001 (M6-25mm Button Head Screw) and # 852-3136-001 (M8x30 Flat Head Screw) will be the replacement bolts, and the # 853-2430-02 (4MM Hex Key) and # 853-0930 (M5 Hex Key) will be the replacement wrenches.
view full answer... - Replacement Hangers, Wet Bolts, And Shackles for Single Axle Trailer
- The Dexter Heavy Duty Suspension Upgrade Kit # K71-358-00 is a great choice for an upgrade to your single axle trailer. This includes wet bolts, steel bushing, and 1/2" thick steel shackles straps that will last.
For your hangers, you will need to measure your current hangers to find the right height. This is the distance from the center of the bolt hole to the top of the hanger. For example, if you got a measurement of 3-1/4" you could use the # 28-5 for a replacement.
Regarding an...
view full answer... - Replacement Key 2806 for Sears Karrite Rooftop Cargo Box
- Sears' Karrite rooftop cargo boxes were made by Thule and so Thule replacement keys will work fine for you. For a lock with code 2806 you will want to order part # THKEYN2806. This is sold as a single key so you might want to get a couple so you always have a backup spare.
view full answer...
Go To Results