Installation of the Draw-Tite Class I Trailer Hitch for the 2006 Chrysler Sebring Convertible, item # 24711, is fairly simple, you will need to install the hitch loosely in two existing holes and then drill two 1/2 inch holes in the frame rail. The exhaust bolt holes are not used on this vehicle.
I have posted a link to the instructions for this hitch and the pictures on the product page should provide some help.
Some items you may need to complete your towing setup with Class I hitch... view full answer...
There is an option for you, but according to the owners manual for your 2005 Chrysler Sebring you will not be able to flat tow your Sebring. The owners manual states:
"Your vehicle may be towed under the following conditions: The gear selector must be in NEUTRAL, the distance to be towed must not exceed 15 miles (25 km), and the towing speed must not exceed 25 mph (40km/h). If the transaxle is not operative, or if the vehicle is to be towed more than 15 miles (25 km), the vehicle
must... view full answer...
Go To Results