Thanks for your business; I see that you purchased the # RM-766 Automatic Battery Disconnect and # RM-156-25 Battery Charge Line Kit along with a few other accessories.
The # RM-751000, which you were looking at, actually isn't needed on your 2016 Chevy Colorado. A supplemental braking system like the Roadmaster Even Brake # RM-9400 is what's required to actuate the Colorado's brake pedal in order to activate the brakes. The Included with the system is also an emergency breakaway kit and... view full answer...
Yes, we do have a wiring harness that will add a 7-way connector to the bed of your 2022 Chevrolet Silverado 1500. It is the Demco 5th Wheel/Gooseneck 90-Degree Wiring Harness with 7-Pole Plug - 10' Long item # DM8555002. This harness will put a 7-way connector inside your Chevy's bed and allow you to keep the one on your bumper. I have attached an installation video. view full answer...
We have the Red Line handle, part # 276, that has a 5/16 inch square shaft. It doesn't look as much like your handle as # PLR7011L, and isn't as heavy-duty, but it's the correct size shank and still locks.
This is the closest option to your handle that we carry. view full answer...
The etrailer Invisible Base Plate Kit # e98966 you're looking at is only made to work with the 4WD versions, however I was able to contact Roadmaster and confirm that their Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-523182-5 is a fit for the 2WD.
That said, you'd still have disconnect the drive shaft as not doing so will damage your vehicle. If you need parts to complete the flat towing setup, you're also going to need:
-A tow bar like the Roadmaster Falcon 2 Tow Bar... view full answer...
For the 2012 Chevy Cruze it looks like there are base plates for various models. If your 2LT does not have fog lights and is not an RS model then I recommend the Roadmaster base plates # 523168-1. If you have an Eco model with active air shutter system, go with # 523170-1. And for an RS model the only option is # BX1698.
For either of the Roadmaster base plates I recommend the Falcon 2 tow bar # RM-520. If you need the Blue Ox base plates then go with the Avail tow bar # BX7420. For safety... view full answer...
You will need a mounting bracket, like # 18138, to mount the adapter # 47435. The bracket comes with the hardware to attach the adapter to it and to attach the bracket to the truck using self-tapping screws included with the bracket. view full answer...
The best way to select a hose for connecting your new water heater to its propane source is to match up the types of fittings required. We have propane products - hoses, regulators, tees - with all sorts of fittings so we should have what you need. Please refer to the linked page.
Water heaters such as the Atwood RV Water Heater # AT96110 use a 3/8-inch fitting like those on # 100383-36-MBS. This hose has a 3/8-inch male pipe thread (3/8 MPT) fitting on one end and a 1/2-inch female flare... view full answer...
In cases like yours where your hitched 5th wheel is riding nose-high and you still need more pin box clearance at the bed rails a low-cost solution that works well for many is an axle over-under kit. These are sometimes referred to as axle flip kits, although that name is not quite accurate.
Kits # K71-384-00 and # K71-385-00 fit 2-3/8-inch and 3-inch diameter axles, respectively, and increase the trailer's height. The height gain in inches will be the total of the axle's diameter plus... view full answer...
Yes, we do have a wiring harness for your 2022 Chevrolet Equinox. It is the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector item # 118759. Tekonsha makes the best and most reliable wiring harnesses in the towing business. This custom-fit T-One connector plugs into your Equinox's wiring harness, which is located behind the driver's-side and passenger's-side tail lights. It plugs into existing wiring which cuts out all the hassle of cutting and splicing wires together.... view full answer...
When trying to find what your tongue weight is for your 2021 Chevrolet Silverado 2500 all you have to do is check your vehicle's owner manual. There are many different configurations for your truck that have different 5th wheel towing capacities so you will need to make sure you're looking at the correct one. You would definitely need to know what your tongue weight is before towing any trailer. If you have to much weight exerted on the hitch ball, the force could overload the rear tires... view full answer...
I went ahead and checked the owner's manual for your 2015 Chevrolet Impala, and the owner's manual actually states that you are not supposed to flat tow this vehicle, so there is not going to be any compatible base plates.
They actually explicitly recommend that your vehicle be transported via flat bed truck, or to be dolly towed with a tow dolly like the Demco Kar Kaddy SS Tow Dolly with Disc Brakes # DM9713045.
This tow dolly has a maximum vehicle weight rating of 4,800-lbs, measures... view full answer...
I recommend using the Reese M5 5th Wheel Trailer Hitch for Ford Towing Prep Package - Single Jaw - 20,000 lbs # RP30921 and Underbed Installation Kit # RP30868. The Reese Elite is a high quality sliding hitch, which is required with your short bed truck to provide clearance from the cab when making tight turns. The Underbed installation kit will provide you with the clean truck bed you're looking for, so this is a great setup for your 2016 Chevy Silverado 2500.
I've linked a review and... view full answer...
After doing some research I found out that the RoadActive Suspension Custom Leaf Spring Enhancement Kit # RAS54FR will fit your 2022 Chevrolet Silverado 1500. I like this system over the others that we offer because it's an all in one suspension system that will improve stability, handling, and control. I also like that if you're riding with an empty load on your truck your ride will not be stiff and uncomfortable. The RAS has an easy, bolt-on installation and has a weight capacity up to... view full answer...
It appears you have the Westin HDX Grille Guard with Punch Plate - Polished Stainless Steel # 57-3680 designed to fit 2014 and newer Chevrolet Silverado 1500's. The correct replacement hardware is, the Replacement Mounting Hardware Kit for Westin HDX Grille Guard with Punch Plate # 57-368PK. view full answer...
The Roadmaster Nighthawk All-Terrain Tow Bar w/ LED Lights # RM-676 does have about half of the standard wiring kit you need for your 2024 Chevy Equinox Premier.
To complete your wiring you need the Universal Wiring Kit with Smart Diodes # RO44FR, and then I also recommend installing the Charge Line Kit # RM-156-25 to ensure your battery isn't dead when you get to your destination. The Smart Diodes in the universal wiring kit is needed so your LED tail lights will properly function. If... view full answer...
The dual hitch extender that I recommend going with is the Malone # MPG544 because it gives you two 2" receivers with one of them sitting about 7-1/2" above the other one. This is compatible with a tow dolly but it has a max weight capacity of 4,000 lbs and max tongue weight of 400 lbs. Since any dual hitch receiver will act as an extender it will also reduce the weight ratings of your trailer hitch by 50% as well.
As long as the reduced weight rating of your trailer hitch is able to handle... view full answer...
Yes, according to the owners manual for the 2021 Chevrolet Equinox it can be flat towed (dinghy towed). In order to do this you will need at least 5 main parts. Those parts being a base plate kit, tow bar, safety cables, tow bar wiring and a supplemental braking system. I have included these parts below along with a brief description of their purpose.
Base Plate Kit: This is a custom fit part that provides the needed attachment points for the tow bar on your Equinox.
- Roadmaster Direct-Connect... view full answer...
To use a HydraStar electric over hydraulic actuator with your 2020 Chevrolet Silverado 1500's OEM brake controller, you will in fact need to use the control adapter module (CAM).
We have that included with the HydraStar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes. the part number being # HS481-8067. This is a plug-and-play setup that is easy to install.
I've linked to a video review of this actuator for you to look at. view full answer...
Are you speaking of a Truck Tailgate Net like the # TR-03 from Bully? If so, the # TR-03 tailgate net is designed for full sized trucks and would work with both a 2000 Silverado and a 2006 model.
As far as a Stromberg Carlson Series 100 tailgate goes like the # VGM-07-100 that you'd looked at goes, If your 2000 Chevy is actually a Silverado and not a C/K series (the 2000 model year was a split model year for GM trucks, Chevy made both a C/K series and the Silverado). If your 2000 Chevy... view full answer...
According to TorkLift, their # TLA7310 StableLoad will install on your vehicle with no drilling required.
Both the upper and lower StableLoad work by reducing the preload required before the factory overload springs come into effect. Torklift states that the lower # TLA7310 kit will solve 90% of handling issues experienced by improving safety and handling, reducing sway and body roll and eliminating sag and leveling the vehicle.
The # TLA7200 will do the same thing by applying preload... view full answer...
Go To Results