The Erickson Flip-Up Stake Pocket Anchors # EM01006 referenced in your question are a universal design and they should work perfectly on your 2007 Chevy Silverado.
To be sure you can measure the inside of the stake pockets on your truck. The brackets on the underside of these anchors that will fit into the stake pockets measure 2-1/8 inches in width and length. view full answer...
I assume you're speaking of the Andersen Ultimate 5th wheel connection that attaches to the gooseneck ball. According to Andersen, their Ultimate 5th wheel connection is indeed compatible with the Curt # C60712 Double Lock, Flip and Store Gooseneck hitch. I've linked you to an install video for the Curt gooseneck hitch. view full answer...
Thanks for that info and we do have the replacement you need. For your 2007 Chevy Silverado with an 8 foot bed with a TruXedo TruXport Tonneau Cover # TX271601, the correct replacement tarp is:
- Replacement Tarp for TruXedo TruXport Soft, Roll-up Tonneau Cover # TX2716-CVR view full answer...
With bull bars and grille guards both the bar/guard part and the installation kit to mount it are vehicle-specific. This means that even if you had the correct installation kit for a particular vehicle you can still only install a bar/guard made for that same vehicle. The install kits are not universal.
The linked page displays all bars/guards that are confirmed to fit on your 2007 Chevrolet Silverado New Body style pickup. You can use the drop-down Select Vehicle Style menu tool to see... view full answer...
I spoke to my contact at B and W and she verified that from the center of where your gooseneck ball attaches to the front of the B and W Companion Slider Gooseneck to 5th Wheel Slider part # BWRVK3400 measures 15 inches. So if you were to measure from the center of your gooseneck ball forward 15 inches you would know if this would interfere with your toolbox.
You should also note that if your tool box sticks up higher than the bed rails of your truck you might see interference while making... view full answer...
Transmission and oil coolers are not vehicle-specific. A transmission cooler can be installed in a vehicle so long as you have space to mount it in an appropriate location where it will receive proper air flow.
You are correct that we do not show the 5.3L option among the engines offered for your 2007 Silverado. I checked our performance tuner applications and indeed the 5.3L appears there so it is likely just an oversight. My contact at Derale confirmed they know of no reason cooler... view full answer...
To determine what size brake assemblies you have you can measure the diameter of the mounted brake shoes on the trailer or measure the inside diameter of the brake drum. I am including pictures of where to measure on the brake assembly and the brake drum. You will also want to measure the width of the brake shoe lining to get the correct width brake assembly.
You will want to get the bolt pattern of the brake mounting flange on your axle and if it is a 4-bolt flange or a 5-bolt flange.... view full answer...
You will most likely need to adjust the hitch as low as it will go and the pin box on a 5th wheel trailer as high as it will go to be able to tow a 5th wheel trailer with your lifted 2007 Chevy Silverado 2500 with the large 315 tires on it. You may also have to raise the height at the rear of the trailer but we can cross the bridge if and when we come to it.
Please note that if the lift on the truck is a body lift you will not be able to install a 5th wheel hitch because the distance between... view full answer...
Fifth wheel brackets # RP50081 are actually for certain Ford trucks and will not fit your 2007 Chevy Silverado 1500 with 5-1/2 foot bed. The comparable brackets that do fit your truck (new body style) are # RP50064.
If you do not already have the rails then I recommend # RP50064-58 which is the complete kit. If you do already have some 10 bolt rails then you would also need bolt kit # RP58504 because the hardware is not meant to be reused.
With the 5-1/2 foot bed you would either have... view full answer...
Yes, the B&W Custom Installation Kit w/ Base Rails # BWRVK2503 will fit your 2007 Chevrolet Silverado 1500 new body style short bed truck. You will be able to use either the 16K B&W Patriot 5th Wheel Trailer Hitch # BWRVK3200 or 18K B&W Patriot 5th Wheel Trailer Hitch # BWRVK3255 with these base rails.
Do remember that the Custom Wedge for B&W Fifth Wheels # SWW-06 is going to be needed if your trailer has a Reese Sidewinder Pin Box # RP34FR.
A Hopkins Endurance 5th Wheel/Gooseneck 90-Degree... view full answer...
To install the Curt Gooseneck Flat Plate # C65500 on your 2007 Chevy Silverado 2500HD you'll need the Custom Installation Kit # C61341.
The instructions for the plate are a little generic, but I added a clip of them for you to reference. You'll need to provide your own hardware for the installation. view full answer...
In order to use the Blue Ox Avante Tow Bar with the etrailer Classic Base Plate Kit part # e98959 which is a fit for a 2007 Chevrolet Silverado 1500 New Body you'll just need the Adapter for Blue Ox Tow Bar to etrailer Classic Base Plates part # e98982.
If you don't want to use any adapters then you'd just need to go with the Blue Ox Base Plate Kit part # BX1674. view full answer...
I have a potential solution for you but none of the hitches for the 2007 Chevy Silverado (New Body style) are designed for models with a roll pan bumper. Installation of a hitch such as # 14301 will likely require a little trimming of the roll pan. If you are willing to make those modifications then this will work.
Otherwise you will need to look at weld-on hitches such as # 41990-07 or # 41990-16 in order to drop the receiver low enough to avoid having to trim the roll pan bumper. Weld-on... view full answer...
Access states that you can use the Vanish Roll-Up Tonneau Cover, # 834532007875, with a spray-in, over the rail bed liner. If it were a drop in over the rail bed liner you would have to trim the bed liner to install the cover. Spray-in bed liners will not have to be trimmed.
I have included a link to all of the tonneau covers for the 2007 Chevy Silverado New Body. Just select the bed type and length to see the available options. view full answer...
Chevy made a 5-1/2 foot bed and 6-1/2 foot bed for the 1500 models in the new body style for the 2007 model year. If you have a 2500 or 3500 series it would be a 6-1/2 foot bed.
If you do have a 1500 you can use universal installation kit # RP30035 in either bed length. And, for either bed length, you can use custom installation kit # RP50064-58. I have linked a video showing a typical installation of the custom kit for you.
The difference between the 2 kits is that the custom kit requires... view full answer...
We do have ways to for you to use a 21K Demco Hijacker Autoslider in your 2007 Chevy Silverado but since the part # DM8550038 comes with specific mounting gear designed to install in a Ford Super Duty factory puck system you will need to use a different part.
The Demco Hijacker part # DM8550035 is what you would need instead as it comes with the mounting configuration that is compatible with industry standard bed rails. If you happen to already have the part # DM8550038 (for Ford pucks)... view full answer...
In most cases a front-mount hitch and a snowplow mount will install at the same points on the vehicle frame and usually they will interfere with each other. There could be a certain combination of hitch and plow that might avoid this common-mounting-point issue but it is unlikely since both items need a very strong mounting point on the vehicle in order to function. Makers of aftermarket products do not test their products fits along with other aftermarket items since there are so many... view full answer...
The Hellwig Pro Series Helper Springs # HE99QR is a fantastic option for your 2007 Chevy Silverado 2500 New Body since it's designed for heavy-duty towing like what you're doing with your gooseneck trailer. I know you said it won't be loaded down too heavily, but a gooseneck trailer is meant for more than a standard bumper pull so this is the best option for your application. view full answer...
Whichever tuner you currently have installed in your truck will have instructions on how to change it back to stock.
After doing that, to install an Edge Evolution CS2 such as part # EP85350 that fits 2007 Chevy Silverado Classics with 4.8L, 5.3L and 6.0L V8 engines you only need to plug the OBDII connector into the vehicle port which is normally below the driver's side dash.
I have included a link to the installation manual of this tuner for you to check out as well. view full answer...
Go To Results