I reached out to my contact at Fulton who said he wasn't able to find a specific rating for the hook part of the Safety Chain with Clevis Hook # FCHA0050324, but he said that they do make sure that the hook meets or exceeds the grade of the chains links so since the chain links are a grade 70 you can be confident that the hook will be just as strong, if not stronger. view full answer...
The Erickson Arched, Aluminum Loading Ramp Set - Non-Folding - 90" x 12" - 3,000 lbs # EM07486 can support your tractor with you on it, although you are taking the liability if you choose to do so. The company makes their straps in Marine City, Michigan where they are headquartered but the ramps you asked about are made overseas to US specifications. view full answer...
The vast majority of trailer tires and wheels are made offshore in China. This is also true for the Kenda Karrier ST225/75R15 Radial Tire with 15-Inch White Spoke Wheel # AM32680 that you referenced.
The factories that produce these products have to adhere to the same Department of Transportation (DOT) standards and specifications as do domestic factories so the tires produced here and there will be virtually identical.
The link provided will show you all tire/wheel combinations in the... view full answer...
Yes, the Replacement Tarp for Access Lorado Soft Tonneau Cover # A42281 does come with the loop side of the hook-and-loop fastener already stitched onto the cover. view full answer...
I spoke with my contact at Erickson who said that the Industrial Deluxe Lever Action Cargo Bar # 08906 is made of aluminum and the lever itself is made of steel. view full answer...
According to my contact at B & W, their # BWPUCP7540BA headache rack uses 6-1/2 x 2-1/4 inch grommet mount taillights, which could be referred to as a 'standard' item. view full answer...
Unless your axles were custom made/modified, the 3" diameter will denote an axle in the capacity range of 5,200 pounds (like the Dexter # 6340624) up to 7,000 pounds (like the Dexter # 8327834). If there was a previous owner of your trailer, they may have upped them to a heavier capacity, but even some manufacturers will equip trailers with heavier duty parts than needed. Especially if it is a newer trailer. Demand has been much higher than supply recently so I have seen a couple trailers... view full answer...
I'm not sure what you would call that on the back of the K-Source Replacement Side Mirror - Electric/Heat w LED Signal # KS62133G, and it doesn't extrude from the housing at all. I've attached a side photo to show it better. It definitely looks a bit more glossy than the rest of the housing, but I think part of it is the lighting too. view full answer...
The K-Source Custom Extendable Towing Mirror Set # KS62075-76G is an imported aftermarket product but it will fit in place of the OEM mirrors on a suitable vehicle such as your 2006 Chevrolet Silverado. K-Source does not make the OEM mirrors on the truck.
Muth glass, based on my research, is a type of glass jar typically used for honey and that originated from Charles Muth in Cinncinnati, Ohio. I do not know of any automotive mirror applications using Muth glass.
Please note that the... view full answer...
A factory fender flare is trim placed around the outside of the wheel well to both protect the vehicle from grime and road debris and enhance the vehicles appearance. I have added a typical photo of what fender flares look like.
The WeatherTech Mud Flaps # WT110005-120005 you referenced are compatible with your 2003 Chevrolet Silverado if they have the factory fender flares. I have provided links to the installation instructions for these mud flaps.
If your truck does not have the fender... view full answer...
The Valterra EZ Coil-N-Store Drinking Water Hose with Quick-Connects - 25' Long x 3/8" Diameter # W01-0022 is manufactured in Taiwan. view full answer...
I used a search engine to find the owner's manual for a 2004 Chevy Silverado, and based on the online manual I saw it looks like the fuse marked "TRL PARK" is the fuse you are looking for. This is in the underhood fuse panel. I recommend looking at your copy of the owner's manual to verify this.
If you are looking for a wiring harness I have added a link to our selection of harnesses that fit an '04 Silverado for you to take a look at. view full answer...
From the sounds of it you most likely have the Curt Quick Goose 2 Gooseneck Hitch with Installation Kit for Chevy/GMC - 30,000 lbs # C630-652. This hitch functions in the manner you described and is confirmed to fit your 2001 Chevy Silverado 2500HD With 6-1/2 foot bed.
If you need replacement parts for this hitch, we have the Replacement Safety-Chain U-Bolt Kit for Curt Quick Goose 2 Gooseneck Hitch # C113 as well as the Replacement Choker Spring for Curt Quick Goose 2 Gooseneck Hitch # C115. view full answer...
For a 5th wheel hitch set up that is made here in the states B&W still manufacturers hitches in the USA. If you wanted to go that route you would need installation kit # BWGNRK1012-5W and Companion hitch # BWRVK3400-5W for your 2013 Chevy Silverado 2500HD short bed. I have included links to videos on the hitch and installation of the rail kit.
The benefit of going with the B&W set up is that you get a gooseneck hitch built into the installation kit so if you ever needed to tow a gooseneck... view full answer...
Yes, the Extang Replacement Front Cab Bow part # EX50995-10 is made of aluminum and is a replacement part for their Express soft tonno cover # EX50995. This cover fits Suzuki and Nissan vehicles with a 6-foot bed.
If you have a cover on your 2006 Silverado it will be a different model. If you click on the linked page you can select your pickup series (1500, 2500 or 3500) and your bed length/type to then see all covers that fit your specific truck. If you then click on Extang you'll see... view full answer...
Yes, the Titan Disc Brake Kit and Leverlock Actuator w/ Electric Lockout part # T4843300 is an excellent option that will do a great job of resisting corrosion. The actuator is coated with a galvanized zinc plating and the calipers and mounting hardware are all dacromet plated. This coating is ideal for saltwater applications and will work well for you.
I have also attached a review video of this kit for you. view full answer...
Thanks for reaching out!
The MagnaFlow Stainless Steel Cat-Back Exhaust System # MF15792 for your 2006 Chevy Silverado 1500 is made of 409 Grade Stainless Steel.
According to my contact at MagnaFlow, this is the same type used for all of their cat-back systems. view full answer...
The tie-down anchors, or lumber stops, on the DeeZee Aluminum Cab Rack, # DZ95050R, are made of cast aluminum for superior rust resistance. They, like the cab rack, are also made right here in the United States. view full answer...