Expert Answers about Chevrolet S-10 Pickup
- How to Connect 4-way to 1991 Chevrolet S-10 Pickup
- To add a 4 pole trailer connector to your S-10, I'd recommend the Curt T-Connector, part # C55312.
This custom-fit harness plugs into your Chevrolet S-10 Pickup's wiring harness, which is located beneath your vehicle, along the driver's-side frame rail.
Once installation is complete, the 4-way flat connector will be stowed beneath your Chevrolet S-10 Pickup, near the trailer hitch. A mounting bracket # 18144 is recommended to keep the connector secure.
It is recommended that you use...
view full answer... - Why Does my 2 Inch Hitch have a 1/2 in Pin Hole and a 5/8 in Pin hole
- The Curt Pin and Clip # F-4 that you referenced is designed to work on 1-1/4 inch hitches. The reason your hitch has a 1/2 inch hole and a 5/8 inch hole is because it is setup for an obsolete anti-rattle device Draw Tite J-Pin. We no longer carry the J-Pin so that hole is no longer used.
This 1/2 inch hole is not designed to be use as a hitch pin hole, you will want to use 5/8 inch pin and clip like the # PC3.
view full answer... - Trailer Hitch Fit for 1998 Chevy S-10 Truck
- The correct hitch will depend on which bumper your S-10 is equipped with.
For a factory step bumper, I'd recommend the Curt # C13132. For a roll pan bumper, you'll want to use # 13920, but you'll need to cut a hole in the license plate well and find an old-school hinged license plate holder online or from a salvage yard.
If you have a short bed truck, the # 13920 hitch will prevent the spare tire from being stowed under the vehicle.
view full answer... - Blue Ox Base Plate Kit - Fixed Arms for 2001 Chevrolet S-10 Pickup
- The # BX1633 is for bigger trucks like a 1500 but the Blue Ox Base Plate Kit - Fixed Arms Item # BX1625 is the confirmed fit from the manufacturer for your vehicle.
view full answer... - Can 2000 Chevrolet S-10 Extreme Pickup Be Flat-Towed
- I did some research and found that the manual for the 2000 Chevrolet S-10 pickup states that the vehicle is not to be flat-towed. The manual states that the transmission is not designed to allow it to be towed behind another vehicle.
The suggestion in the manual is to place the truck with all four wheels on a dolly like a car hauler. I wish I had better news for you but I cannot recommend anything that will allow you to flat-tow your S-10.
view full answer... - What Snow Tire Chains Do You Recommend For My 205/75-14 Sized Tires
- The Titan Chain Snow Tire Chains - Ladder Pattern - Twist Links - 1 Pair, part # TC1134, is a Class S compatible snow tire chain that is compatible with your 205/75-14 sized tires. The Class S designation means these snow tire chains were designed to fit tight tolerances on your vehicle's wheel well.
I have included a product description link below.
view full answer... - Trailer Hitch Receiver Compatible With 1992 GMC Sonoma Short Bed
- The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # C13132 will fit your 1992 GMC Sonoma truck as long as you have a factory step bumper. It will require temporary removal of the rear bumper during installation. It is not a fit for a roll pan bumper.
If you have a roll pan bumper, you will need to use the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13920. This will require a relocation of the spare tire in short bed models as well as cutting the rollpan...
view full answer... - Is the Roadmaster Tracker Tow Bar Compatibile with Standard Base Plate 161-2 for a 1998 Chevy S10
- Yes, the Tracker Tow Bar, part # RM-020 that you use with your Geo Tracker will also work with the 161-2 Standard base plates for your 2 wheel drive Chevy S10.
view full answer... - Grille Guard Compatible with 2002 Chevy S-10 Truck
- The Replacement Mounting Hardware Kit for Westin Sportsman Grille Guard # 40-143PK is not a fit for your S10. That mounting kit is only a fit for 2002 to 2004 Nissan Xterra.
Westin does not carry a full grille guard for your truck but they have bull bars like # 30-0005-1065 or # 30-0000-1065. We do have a similar full grille guard from Aries for your truck. It is the Aries Grille Guard - 1 Piece - Black Powder Coated Steel # AA4044 and fits 1998-2003 S-10 pickups and 1998-2004 Blazers.
view full answer... - Does a Trailer Hitch Receiver From a 2002 Jeep Grand Cherokee Fit a 1997 Chevy S-10
- We carry hitches to fit your 1997 Chevrolet S-10 but a hitch from a Grand Cherokee isn't the same design. The distance between the frame and the way the hitch attaches to the frame are significantly different. Trailer hitches are custom made for specific vehicles and it's rare that a hitch for one fits another unless they have the same frame. For example, Draw-Tite # 75085 if for the S-10 as well as the GMC Sonoma, the GMC S-15, and the Isuzu Hombre.
I've attached a link to all of the...
view full answer... - Trailer Hitch Receiver Needed for 2001 Chevy S-10 Xtreme Trim
- Curt # 13920 works with you 2001 Chevrolet S-10 Xtreme. The Xtreme trim has a roll pan style rear bumper which is not designed for trailer hitches. The Curt hitch's receiver tube is mounted on the top of the cross tube and is concealed behind the license plate. You do want to keep in mind the hitch sits higher than a normal S-10 due to the receiver tube being mounted behind the plate.
I have also attached a ball mount set # 989900 that offers two ball sizes, two different drops, two pins...
view full answer... - Fit of Access Roll-Up Tonneau Cover Part # 834532000258 on 2000 Chevy S-10
- As long as your 2000 Chevy S-10 with the 6 foot bed is a step-side model, the Access Roll-Up Tonneau Cover part # 834532000258 is the correct fit for your truck.
view full answer... - Fit of CURT 2 inch Bumper Hitch, # E-3S, on 1996 Chevy S-10
- The CURT 2 inch Bumper Hitch, # E-3S, will fit your 1996 Chevy S-10.
To view the install instructions, click on the provided link.
view full answer... - How to Wire a 7-Way Trailer Connector on a 1999 Chevrolet S-10 Pickup
- In order to install a 7-way trailer connector on your 1999 Chevrolet S-10 Pickup you will want to use the Adapter 4-Pole to 7-Pole and 4-Pole part # 37185. This adapter will plug into the 4-way trailer connector you have on your vehicle and will give you both 4 and 7-way trailer connection points. Since you boat trailer only uses 5 of the 7 wires on the trailer connector, the only 2 wires you will need to attach on the 7-way is the ground and reverse light circuit. In order find the reverse...
view full answer... - Is Drilling Required for the Front Hitch on a 2001 Chevrolet S-10 ZR2
- Yes, the Draw-Tite Front Mount Trailer Hitch Receiver part # 65004 is a confirmed fit for your 2001 Chevrolet S-10 ZR2. If you have the factory tow hooks then no-drilling will be required but if you don't have the factory tow hooks then you will need to drill. However, according to my research the ZR2 package came with factory tow hooks so you should not have to do any drilling.
The Draw-Tite Front Mount Trailer Hitch Receiver has a 300 lb vertical load rating and a 9,000 lb line pull...
view full answer... - Stainless Steel Putco Tailgate Cap for a 2000 Chevy S-10
- The Stainless Steel Putco Tailgate Cap # P51610P that you referenced is for a 1967 - 1972 GM pickup. For your 2000 Chevy S-10 you need the Stainless Steel Putco Tailgate Cap # P51622P instead.
Attached is a link to all of the other trim pieces that we have for a 2000 Chevy S-10 that you can check out.
view full answer... - Availability of Cantilever Extension for TracRac TracONE Ladder Rack
- For TracONE ladder racks like the part # TH27000XTB that you referenced we only have the silver cantilever extension part # TH24001XT.
view full answer... - What Vehicles Does Curt Trailer Hitch C13021 Fit and Replacement Hardware for the Hitch
- Curt Class III trailer hitch # C13021 fits the following vehicles:
1982 - 2004 Chevrolet S-10 Pickup with Factory Step Bumper
1982 - 1990 GMC S-15 Pickup with Factory Step Bumper
1991 - 2004 GMC Sonoma with Factory Step Bumper
1996 - 2000 Isuzu Hombre with Step Bumper
If you are selling a hitch the hardware cannot be reused. It is meant to be torqued down one time only. So for replacement hardware use # RHK, enter the hitch number and manufacturer where indicated on the RHK page, then...
view full answer... - Which Trailer Hitch Fits 2003 Chevrolet S10 Sportside
- Since you have a 2003 Chevy S10 Sportside the correct hitch you need is the # 75085. A roll pan bumper is totally smooth and basically doesn't stick out past the tailgate surface at all. A non towing bumper would still stick out further from the tailgate.
view full answer... - Will a CURT Front Mount Trailer Hitch Fit a 2002 Chevy S-10 ZR2
- I spoke with my contact at CURT and he stated that the CURT Front Receiver, # 31021, will fit the 2002 Chevy S-10 ZR2 provided it is a 4 wheel drive model. I have included a link to the installation details for you.
This hitch would be great for a snow plow. It has a 2 inch receiver which is what you will find on Class III hitches.
view full answer...
Go To Results