To choose a weight distribution system you will need to go by the total tongue weight of the set up. This is calculated by taking the tongue weight of the trailer, when loaded and ready to tow, and adding to that the weight of anything loaded behind the rear axle of the tow vehicle.
Like you said the 800 to 1,200 pound system you have is rated much too high for a tongue weight of 278 pounds. I recommend a system that maxes out at 600 pounds, # EQ37060ET, so that it will be effective and... view full answer...
I called our representative at Reese and the hitch part number 41115 you referenced will only fit the 1975-1991 Ford Econoline E150, E250 and E350 vans.
Specifically:
1975 - 1983 Ford, E-100 Econoline Van, Full Size, All Models
1975 - 1991 Ford, E-150 Econoline Van, Full Size, All Models
1975 - 1991 Ford, E-250 Econoline Van, Full Size, All Models
1975 - 1991 Ford, E-350 Econoline Van, Full Size, All Models
The part number 41115 was made obsolete in 2006. view full answer...
Yes, there are wiring kits available for a 1993 Chevrolet Blazer 4x4. I assume you are looking for a trailer wiring harness. If this is the case, then I recommend the Curt T-Connector Vehicle Wiring Harness, # C55319. This is a plug-in style wiring harness that connects in-line with the trucks tail light harness. The tail light harness can be found along the left rear frame rail by the bumper. I have attached the installation instructions for you to check out.
If you cannot easily access... view full answer...
Go To Results