bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Chevrolet Malibu Maxx


  • Will Rightline Cargo Hatch Saddlebag Fit a 2007 Chevy Malibu Maxx
  • Fit of the Rightline Cargo Hatch Saddlebag, # RL100B90, on your 2007 Chevy Malibu Maxx will most likely not be an issue since that vehicle has a similar shape at the back as some SUVs and crossover vehicles. But to be sure, the bag measures 40 inches across, 20 inches front to back, and 28 inches tall. You can compare these measurements to the available space on the back of the vehicle to make sure it will fit back there. The bag is made of vinyl and the straps have padded sections so...
    view full answer...

  • Will the Hopkins Backup Sensor System, # HM60100VA Fit a Chevy Silverado LTZ
  • I am not sure what would interfere with the Hopkins Backup Sensor system, # HM60100VA, considering that it mounts in the same place as the rear license plate. The overall width of the unit is 13-1/8 inches, see photo, and the height is 5-15/16 inches. It sounds like it will just fit if your measurement is slightly above 13 inches and not slightly less than 13 inches.
    view full answer...

  • Will the Q-Clips Q-102 fit Older Yakima Q-Towers
  • I spoke with my contact at Yakima and he informed me that the discontinued Q102 Q-Clips that you referenced will work with the Q-towers you bought around 2001. He also said that for your 2004 Chevy Malibu Maxx you would need two sets of these clips, and as long as your crossbars are long enough you would be good to go. The recommended crossbar length for your vehicle is 58 inches. If your current bars aren't long enough and you needed a set you would want the Round 58 inch Crossbars part...
    view full answer...

  • Trailer Hitch Recommendation for a 2005 Chevrolet Mailbu Maxx for Use With an Allen Bike Rack
  • The only hitch made for your Malibu is the Curt Trailer Hitch, # 12280. It is rated for 350 pounds of tongue weight and 3500 pounds of towing. This is a Class-2 hitch with a 1-1/4 inch receiver opening. You will need to make sure the bike rack you plan to use fits in a 1-1/4 inch receiver. If you plan to tow, you will need a ball, like # 19258, and wiring # 18252.
    view full answer...

  • Installation of Curt Class II # C12280 Hitch on 2005 Chevy Malibu Maxx
  • To install the Curt Class II # C12280 hitch on a 2005 Chevy Malibu Maxx, you would need to drill two holes, one in the underside of each frame rail, as outlined in the instructions I've linked you to. If you'll be doing some light duty towing with your hitch, you might also need the following: Trailer wiring harness, part # C56013 Ball mount, part # C45520 1-7/8 hitch ball, part # C40001 2 inch hitch ball, part # C40018 Locking hitch pin, part # e98882
    view full answer...

  • Installing Draw-Tite Trailer Hitch # 36379 on 2006 Chevy Malibu Maxx
  • The Draw-Tite Trailer Hitch Receiver # 36379 referenced in your question is confirmed to fit your 2006 Chevy Malibu Maxx. It sounds like you might be referring to the fuel filler tube on the vehicle that might be in the way to gain proper clearance to access the hole on the frame rail. If this is the case, you will simply need to temporarily lower the tube during installation. This is perfectly fine to do. I have attached the written installation instructions that you can also check out.
    view full answer...

  • Will K-Source Towing Mirror KSVS-8 Fit 2006 Chevy Malibu Maxx
  • The K-Source Mirror part # KSVS-8 can pretty easily be installed on your 2006 Malibu Maxx. The mounting plate that comes on it can fit nearly all mirror attachments but in case it did not it comes with a mounting plate you could install on your vehicle for it. Any other features besides dimming would be lost with this mirror.
    view full answer...

  • Can Erickson Ratcheted Tie-Down Ropes be Used to Secure Lumber on Roof of a 2006 Chevy Malibu Maxx
  • I would not recommend a rope tie down such as # 01801 for transporting lumber on the roof of your 2006 Chevy Malibu Maxx. Using ratchet straps such as # EM04418 provides more surface area contact with the wood and you can get them tighter than # 01801. If you were to use # 01801 or something similar I would recommend putting eye bolts in the ends of each piece of wood on each side, running the rope through those, and securing the rope at the front and rear of the vehicle. Then you could...
    view full answer...

  • Troubleshooting Rear Turn Signals on 2004 Chevrolet Malibu Maxx
  • I suggest you first check the rear turn signal bulbs in your light housings and then also the turn signal fuses in the power distribution box in your 2004 Chevrolet Malibu Maxx. Dealer wiring repairs can indeed be costly but checking/replacing bulbs and fuses is easy and inexpensive. If your bulbs and fuses are good then you'll want to inspect the wiring and connectors in the lights for any signs of loose wires or fasteners. Check the bulb sockets for signs of discoloration - even very...
    view full answer...

  • Availability of Fulton Hand Winch that Can have Handle on Either Side of the Winch
  • Most of the Fulton hand winches can't have the handle moved to the other side, but if you send me a picture of what you have I can take a look to see if yours is able to do so. For a winch that you can move the handle to the left side you can use # FW16000101.
    view full answer...

  • What Size Transmission Cooler Fittings for 2004 Chevy Malibu Maxx
  • The fitting needed will depend on both the transmission cooler and the lines for the transmission. Some transmission coolers use slip-on fittings in which case nothing other than a hose clamp is needed. Others use NPT threaded fittings and others still use AN thread fittings. You will need to trace the lines back to the transmission to find out which line is the sending line and which is the return line. If you will retain use of the factory transmission cooler, you will want the fluid...
    view full answer...

  • Does Curt Hitch # C12280 Fit 2007 Chevy Malibu Maxx
  • We have confirmed with Curt that the hitch # C12280 does fit your 2007 Chevy Malibu Maxx.
    view full answer...

  • Parts Needed to Flat Tow 2005 Chevrolet Malibu Maxx
  • Flat towing a vehicle requires a few components, including a tow bar, safety cables, a wiring/lighting solution of some type, a high/low hitch adapter and on the car a set of base plates and a supplementary braking system. The linked overview article covers each of these. This article and the vehicle owner's manual are the best starting points for determining whether the specific vehicle can be flat towed and what items you'll need to do so. I reviewed an online edition of the manual and...
    view full answer...

  • Will the Dutton-Lainson Trailer Jack # DL22800 fit on a 2-1/2 inch Mounting Hole Bracket
  • The Dutton-Lainson Trailer Jack # DL22800 was designed to fit on a 2-1/2 inch diameter mounting hole like what you have so it should work well for you. Check out the install and review video I attached for this jack as well.
    view full answer...

  • Ordering Additional Yakima SKS Lock Cores to Match Current Locks
  • To purchase matching Yakima SKS lock cores to lock the JayLow kayak carrier, part # Y04073, to a Yakima roof rack pull one of the cores you currently have now out and read the number on the side of the core. Then find the Yakima core using part # Y8771-XXXX where the X's are the number on your core. For example if you have core number A148 then use part # Y8771-A148. You'll need two cores for the JayLow carrier. To remove the lock core from your current rack use the control key, part...
    view full answer...

  • Best Trunk Mounted Bike Rack for a 2005 Chevrolet Malibu Maxx for 3 Bikes
  • The best solution for a trunk rack to carry 3 bikes with your 2005 Chevy Malibu would be the Thule OutWay 3 Bike Carrier # TH56BVO. The platform OutWay is only available in a 2 bike configuration so I can't recommend it for you. What makes this rack far superior to the others is the attachment system. It uses 2 retractable coated steel cables to attach to the vehicle rather than 6 nylon straps like other racks. This makes installation quick and easy and the cables also last longer. The...
    view full answer...

  • Roof Rack and Canoe Carrier Recommendation for a 2007 Chevy Malibu Maxx
  • The Yakima Crossbar Pads part # Y07413 that you referenced will work as a canoe carrier for your 2007 Chevy Malibu Maxx, but it will first require you to install a roof rack on your vehicle. For that you would want the Inno rack for your vehicle that consists of part numbers # INXB108-2, # INXS200, and # INK521.
    view full answer...

  • Parts Recommendation for a 2005 Chevy Malibu Maxx to tow a 2,000 lb Boat and Trailer
  • First thing you need to do is check the owner's manual of your 2005 Chevy Malibu Maxx under the towing section to see what Chevy lists as the towing capacities of your vehicle. The Curt Hitch part # C12280 that you referenced is confirmed to fit your vehicle and has towing capacities of 350 lbs tongue weight and 3,500 lbs total trailer weight. If your owner's manual lists a lower figure you will need to go with that as the capacity as a towing setup is only as strong as it's weakest component. For...
    view full answer...

  • What Is The Best Trunk Mounted Bike Rack For a 2006 Chevrolet Malibu Maxx
  • For your 2006 Chevrolet Malibu Maxx, I recommend the Thule OutWay 2 Bike Trunk Rack # TH45JV. Its patented FitDial system makes the mounting of the rack quick and easy and the high-strength, retractable cables with hooks anchor the back to the Chevrolet Malibu Maxx at four points for stability. I have included a link to the installation instructions. While we do not have a video specifically showing the installation of the Thule OutWay 2 Bike Trunk Rack on a 2006 Chevrolet Malibu Maxx,...
    view full answer...

  • Fit of SportRack Roof Rack and Kayak Carrier Recommedation for 2006 Chevy Malibu Maxx
  • The SportRack # SR1002 roof rack is a confirmed fit for your MalibuMaxx, according to SportRack. Once installed, the roof rack will have a 130 lb weight capacity. If the combined weight of the kayaks is less than the rack's capacity, it'll handle the weight without issue. Installation hardware is included, but the kayak carriers themselves are sold separately. Swagman offers a practical option, the J-Rack part # S65148. The carriers include the straps needed to secure the kayaks to the...
    view full answer...