According to Thule, the Passage 2 Bike Carrier - Trunk Mount, # TH910XT, will fit your 2008 Chevy HHR. I have included a link to a video review of this rack below. You might also be interested in the Alternative Frame Bike Adapter Bar for Hitch Bike Racks, # TH982XT. I have included a video review of this adapter below as well. view full answer...
The closest option we have to what you're looking for is the WeatherTech Universal Cargo Mat # WT11AVMCB, which is 53" wide x 36" long. This isn't going to give you a lot of coverage so we do offer another option, the Aries Automotive Seat Defender Cargo Area Protector # AA3149B. This mat is 60" long x 60" wide and is made of polyester with a thermoplastic rubber lining to help grip the floor of the vehicle and prevent it from sliding.
I've attached some review videos below so you can... view full answer...
The Superchips Flashpaq F5 Performance Tuner - California Approved - Gas/Diesel # SU4845 was only a fit for model years up to 2009. I reached out to my contact at Superchips and Edge and there is not a fit for your 2010 Chevy HHR model to enhance performance. You can use the Edge Insight CS2 Comprehensive Gauge Display - Color Screen # EP84030 to troubleshoot codes and display parameters.
To increase your performance the only option we have is the MagnaFlow Cat-Back Exhaust System -... view full answer...
This has actually come up before and Roadmaster explained that they have not tested their base plates with the EAZ Lift tow bars so I cannot say if they will fit or not. You would need to contact EAZ Lift to determine if they have tested it with Roadmaster or Blue Ox base plates.
What I recommend is using the Roadmaster base plates, # 3141-1, and using a tow bar that you know is compatible like the Falcon 2, # RM-520. You will also need safety cables like # RM-643. Next you will need... view full answer...
I checked with Curt and trailer hitch # C11447 will fit your 2009 Chevy HHR SS model! You mentioned that you want to use the hitch for a bike rack. If you choose the Curt hitch then Curt also says you have to use stabilization strap # 18050 when using this hitch for any non-trailer load (such as a bike rack or cargo carrier) per their warranty requirements.
If you don't want to have to use the strap then I recommend the Draw-Tite hitch, # 24756, because it does not require the use of the... view full answer...
Your 2006 Chevy HHR has a Class I 1-1/4 inches hitch receiver, so you would use the recommended ball mount that will fit your Class I 1-1/4 inches receiver.
The Draw-Tite Ball Mount, # 3594, is the recommended ball mount that will safely work on your Class I hitch.
You will also need the hitch ball for the ball mount. The hitch ball size will depend on the coupler size on the trailer. It would be either 1-7/8 hitch ball like the Tow Ready Ball, # 19256, or a 2 inch hitch ball like the... view full answer...
For your 2008 Chevrolet HHR with 1-1/4-inch hitch you can use the Skull with L.E.D. Eyes Trailer Hitch Receiver Cover # CR-018. If a skull with glowing red eyes is not your cup of tea, you could use the Trailer Hitch Receiver Adapter 1-1/4" to 2" Hitch - 6-1/2" Long # e43YR with the Flint Hill Goods Square LED Brake Light Hitch Cover for 2" Hitches # FHG72VR. The adapter would allow you to use the 2" # FHG72VR on your 1-1/4" hitch, but it will stick out 6-1/2".
These lights require... view full answer...
I could not find your invoice based on your email to confirm, but you most likely have the Blue Ox Base Plate Kit - Removable Arms # BX1692 with a distance between brackets of 22 inches. I reached out to my contact at Blue Ox and was able to confirm that the Blue Ox Allure Tow Bar - Pintle Style - A-Frame - Car Mount - 10,000 lbs # BX7460P will work if you have a pintle hitch or the Blue Ox Acclaim Tow Bar - A-Frame - Car Mount - 5,000 lbs # BX4330 will work with a 2 inch coupler to mount... view full answer...
Both the Thule OutWay, # TH45JV, and the Thule Gateway, # TH88VR, will fit your 2009 Chevy HHR. There are numerous bike racks that will fit your HHR. I have included a link to them for you. I have also included some links on the Raceway and Gateway.
If I had to choose between the two racks, I would personally go with the OutWay. The ratcheting hooks that the Raceway uses to attach to the vehicle are much easier to use than the straps and buckles used by other racks. The OutWay also features... view full answer...
The Rightline Gear Cargo Hatch Saddlebag part # RL100B90 is an extremely universal cargo bag for use on the back hatch of most suv's. They are not vehicle specific but after reviewing both the cargo bag and a 2011 Chevrolet HHR, I don't see any reason as to why they would not work with one another. The only thing I can think of is that you may lose a bit of visibility at the bottom portion of your rear window due to the size of the bag in comparison to the hatch. The bag includes a sack... view full answer...
We do indeed have a cargo mat fit for your 2009 Chey HHR from WeatherTech, and I verified the fit for you with the manufacturer. The mat will cover just the cargo area, behind where the rear seats are, and you can choose from either black or gray color:
- Black: WeatherTech Cargo Liner # WT40416
- Gray: WeatherTech Cargo Liner # WT42416 view full answer...
The correct fuse bypass needed for flat towing a 2010 Chevy HHR is the Roadmaster FuseMaster Fuse Bypass - 13" - 20-Amp Mini-Fuse # RM76511. view full answer...
If your 2011 Chevrolet HHR has the factory installed rails, the Rhino-Rack SXB Roof Rack, part # RRVA106S-2, and part # RRSX100 is a good fit. This system Includes 4 legs that attach to the siderails, 2 silver 42 inch long Aero crossbars, and 4 locking endcaps. Depending on the cargo you plan to carry, the size and shape of the crossbars may be something to consider. If you know what type of cargo you will be using the rack for, we can better assist you with selecting the correct racks... view full answer...
According to Thule, the maximum recommended top speed when using the Self-Tensioning Low Profile Snow Chains is 50 KPH, or about 30 mph. The chains will fit the tires on your HHR.
I found an online copy of the owners manual for the 2008 HHR, and saw that Chevy does not recommend using tire chains, so I would recommend consulting your Chevy dealer for a clarification.
I have linked you to an article about tire chains that you might find helpful. view full answer...
Yes, the B&W Companion OEM 5th Wheel Trailer Hitch item # BWRVK3670 will fit in the puck system of your short bed Ram 2500. The Companion Slider has a 20,000 lbs capacity and will give you 12" of travel for making tight turns and backing.
The Companion's 1" thick dual jaws will give you a 360-degree jaw to kingpin contact. This system minimizes the chucking, jarring and noise that can occur when towing a fifth wheel trailer. This not only provides a more secure connection but also a quieter... view full answer...
Since you already have a tow bar and a supplemental braking system you won't need much. To flat tow your 2008 Chevy HHR you will need a base plate kit compatible with your Blue Ox tow bar, a wiring kit, and a charge line kit if you are worried your battery will die on the way to your destination. I have listed the parts you will need below along with any available installation videos.
Base Plate Kit: Blue Ox Base Plate Kit item # BX1692. This custom-fit base plate kit is designed for the... view full answer...
Curt Trailer Hitch, # 11430, is designed to fit various years and models of the Chevy Cobalt coupe and sedan but not the Chevy HHR. For a 2010 Chevy HHR the correct Curt trailer hitch is # 11447. I have included links to the instructions and a video showing a typical installation for you.
The hitch comes with the correct ball mount, hitch pin, and clip. If you plan on doing some towing you can use 1-7/8 inch ball # 19256 or 2 inch ball # 19258. For trailer wiring use # 118407. I have linked... view full answer...
There is a little adjustability in the mounting feet for the SportRack cargo box # SR7018. By making the mounting feet more forward on the box, the body of the box will be further back and may provide you with the clearance needed. If the crossbars on your 2007 Chevy HHR are adjustable forward and backward, that is another way to gain more clearance if needed.
This box will fit a bar spread of 25-7/8", 27-7/8", or 29-7/8" (measured from center to center) and on bars up to 4 inches wide.... view full answer...
Class I hitches can not handle the additional weight and leverage that the third bike will put on the hitch. The weight of the third bike will be extended pretty far out and away from the hitch pin so the leverage would be too much for the hitch.
You could use this Swagman Trailhead 3 Bike Carrier # S63365 that you referenced on the hitch that is on your 2008 Chevy HHR but you should not put more than 2 bikes on this rack at a time.
I attached installation instructions for this product... view full answer...
According to our friends at Thule, their Passage trunk mounted bike rack, part # TH910XT is indeed a fit for your 2011 HHR.
For womens bikes or bikes with sharply angled top tubes or step-through frames, using a frame adapter like part # TH982XT is recommended. The adapter spans the distance between the seat post and the handle bar gooseneck, and provides a level attachment point to the bike rack so the bike has greater ground clearance and is not carried at an angle. view full answer...
Go To Results