For your nerf bars on your 1998 Chevy 3 door extended cab Z71, we have the Replacement Hardware for Westin 25 and 26 series Step Bars # 25-168PK which will work with Westin Signature series 3 inch round nerf bars. These brackets come with the mounting hardware. view full answer...
Given the information that you were able to provide, it sounds like you likely have the Extang Revolution Soft Tonneau Cover. I have included a video of this cover so that you can compare your cover to the Revolution. Unfortunately that cover is no longer available, but we do have a replacement tarp for it if you are just needing to replace the tarp. That would be Replacement Tarp for Extang Revolution Soft Tonneau Cover # EX53650. The Revolution was made for 6-1/2' beds.
If you are needing... view full answer...
I was able to confirm you have the TruXedo TruXport Soft, Roll-Up Tonneau Cover # TX240601 on your 1986 Chevrolet C10 with the 8' bed. You will need the Replacement Tarp # TX2406-CVR. view full answer...
These Replacement Step Pads are for Westin Nerf Bars # 21-0001 but are 4 inches wide and 2 inches long. They have tabs on the sides so if these look like the same set up as yours. Nerf Bars are usually pretty similar. We do not have the exact replacements for any Bully Nerf Bars. view full answer...
TruXedo part # TX1117876 is a pair of 80-inch-long x 1-inch hook strips that replace the truck-mounted portion of their tonneau covers like their TruXport # TX297601. The mating loop portion is sewn onto the cover itself. The part number for the replacement cover is # TX2976-CVR. view full answer...
If you have the TruXedo TruXport # TX241601 on your 1994 Chevy C/K with the 8' bed then the replacement tarp is part # TX2416-CVR. If you have a different tonneau cover then I'd need to know what the brand and part number or style it is before I could let you know what the replacement tarp is (provided we carry it). view full answer...
After looking at some photos of the Performance boat trailers it looks like you likely have 1/2" wheel bolts. If that is the case then the Chrome Trailer Wheel Lug Nut # 12CLN-L would be a good option for you.
I have also linked our selection of boat trailer lug nuts. If you find that you have a lug nut size other than 1/2" you can use that link to find the correct lug nut or you can reach back out to me with your lug nut information and I can help you further. view full answer...
Yes! I confirmed with my contact at Extang that the Replacement Tarp for Extang Tuff Tonno Roll-up Soft Tonneau Cover - Black # EX13540 is the correct replacement cover for your Tuff Tonno on your 1992 Chevy C/K 1500 with a 6-1/2 foot bed. view full answer...
The Replacement Cover # EX13545 is for a Extang Tuff Tonno Soft Tonneau Cover 14545. This cover is a snapless J-strip, roll up vinyl cover that will fit a 1988-2000 Chevrolet C2500 8' Bed. As long as you can confirm that you have the Extang 14545 cover on your truck this will be the correct cover. view full answer...
Yes, the pressure sensor # AL24558 is a fit for your Air Lift compressor system. And you are correct, they are sold in quantities of one. view full answer...
If the inner tube on your swivel jack measures 1.725", the Replacement Cap part # PS500322 would be your best option for replacement without knowing the exact model of jack you have. The replacement caps we offer are all specific to certain jacks so please be aware that finding an exact fit may be difficult. However, the sleeve of this cap measures 1-3/4" and since there is a bit of room for error I do believe it will work but I cannot confirm 100% as we have no way of testing prior.
You... view full answer...
I contacted the manufacturer and Item # FVK8017-00 is not the correct replacement. They advised that because of the vents age, in order to replace the vent fan with something that would be compatible, you would have to go with the Fan-Tastic Vent 7350 Series Upgrade Kit Item # FV807359 and the Replacement Fan Motor Assembly Kit for Fan-Tastic Vent Roof Vent Fans Item # FVK8017-00. The Fantastic Model 1000 is not a model number in their system however; the 7350 would work because of the... view full answer...
The correct replacement cover/tarp for an Extang Classic Platinum on a 1989 Chevrolet C/K Series Stepside is the Replacement Tarp for Extang Classic Platinum Soft Tonneau Cover part # EX6620. view full answer...
Yes. The KA90831 part number you referenced are a 10" x 2-1/4" drum so the # AKEBRK-35R and # AKEBRK-35L would work well for you. If you wanted to upgrade to a self adjusting brake assembly you could use part # AKEBRK-35-SA. These brakes do not come with mounting hardware included but you can pick that up with part # BRKH10B. view full answer...
Yes, we have the Westin Fey Diamondstep Rear Bumper, # 20000-92230 in a black powder coat finish that is confirmed to fit the 1988 Chevrolet C/K Series Pickup. Note the link below of this being installed on a 1986 model. view full answer...
Are you looking for just the upper, lower, and axle strap brackets or do you need a complete hardware kit to install Firestone air bags on your '88 K1500? view full answer...
If you have a TracRac ladder rack installed on your 1997 Chevy Truck the correct part number for a single crossbar is the part # TAFX-30007-02 that you referenced.
This is 69-1/2 inches long and would be the correct length for your rack. view full answer...
The replacement seals available for your BAKFlip F1 Hard Tonneau Cover are as follows: Replacement Cab Bumpers 3/4" Thick x 9" Long - Qty 4 # PARTS-326A0008, Replacement Bulkhead Seal 3/8" Thick x 65" Long # PARTS-326A0004, and Replacement Bulkhead Seal 1/4" Thick x 65" Long # PARTS-326A0005. view full answer...
I called my contact at Reese and he confirmed that the Reese Replacement 16K Fifth Wheel Head, part # RP58146, is the correct replacement head for the Reese 15K Kwik Slide # 30048 with # 30049 head. The 2-Piece jaw provides excellent jaw-to-king-pin contact. view full answer...